Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 48 for “"Experimental Heat Transfer"”.

  1. Experimental heat transfer studies with infrared camera

    … thesis described on this report consists on two experimental heat transfer studies using infrared thermography technology. The first part, the temperature evolution of two cooled surfaces is studied. Representing the thermal effect suffered by the pistons during the process of injection in diesel …

    chalmers Repository record for Experimental heat transfer studies with infrared camera (opens in a new tab)

  2. Experimental Heat Transfer Study in Intermediate Turbine Duct

    This master thesis report presents an experimental study of the heat transfer in an agressive intermediate turbine duct (ITD). The aim of this study is the visualization of a surface temperature distribution and convection heat transfer coefficient with a very high resolution and precision of vane …

    chalmers Repository record for Experimental Heat Transfer Study in Intermediate Turbine Duct (opens in a new tab)

  3. Experimental heat transfer measurement technique validation and measurements in a linear cascade of an OGV and endwall

    The scope of this Master thesis is to study the heat transfer on the endwall of an OGV located in a low speed linear cascade facility. Prior to performing these experiments, the instrumented endwall for heat transfer measurements was validated. Two experiments are carried out for this purpose. At …

    chalmers Repository record for Experimental heat transfer measurement technique validation and measurements in a linear cascade of an OGV and endwall (opens in a new tab)

  4. An Experimental Heat Transfer Study of the Straight Portion of the Exhaust Port of a Spark Ignition Engine

    Made available in DSpace on 2014-12-13T19:55:29Z (GMT). No. of bitstreams: 1 7913540.pdf: 3088712 bytes, checksum: 09d6cfa7e5011b471ef0b7a15c8dfaab (MD5) Previous issue date: 1978

    uiuc Repository record for An Experimental Heat Transfer Study of the Straight Portion of the Exhaust Port of a Spark Ignition Engine (opens in a new tab)

  5. Experimental Heat Transfer Distributions Over An Aft Loaded Vane With A Large Leading Edge At Very High Turbulence Levels

    The purpose of this study is to experimentally investigate the effects of high free-stream turbulence on an aft loaded vane designed with a large leading edge. The large leading edge vane design was chosen to help reduce the heat transfer levels on the leading edge of the vane, while also …

    nodak Repository record for Experimental Heat Transfer Distributions Over An Aft Loaded Vane With A Large Leading Edge At Very High Turbulence Levels (opens in a new tab)

  6. Experimental study of heat transfer from a moving and evaporating meniscus on a heated surface

    … formed between a needle dispensing water over a heated circular face of a rotating copper block. The needle is offset from the axis of rotation and thus forms a moving meniscus. The water flow rate, heater surface temperature and the speed of rotation are controlled to provide a stable meniscus …

    rit Repository record for Experimental study of heat transfer from a moving and evaporating meniscus on a heated surface (opens in a new tab)

  7. Experimental development of tubseide heat transfer correlations for laminar flow with and without inserts.

    An experimental study of laminar flow heat transfer of an ethylene glycol/water mixture in an electrically heated horizontal tube using wire mesh (HEATEX) and twisted tape inserts was investigated. Twelve thermocouples, inserted in the tube wall at four longitudinal locations, enabled a mean inside …

    nps Repository record for Experimental development of tubseide heat transfer correlations for laminar flow with and without inserts. (opens in a new tab)

  8. The condensation of vapors from gas - vapor mixtures

    <p>Superheated mixtures of cyclohexane vapor and nitrogen and benzene vapor and nitrogen were passed at various flow rates downward through a vertical double pipe condenser with cooling water flawing counter-currently in an annular space.</p><p>The method of Colburn and Hougen for the design of …

    njit Repository record for The condensation of vapors from gas - vapor mixtures (opens in a new tab)

  9. Batch heat transfer to suspensions in an agitated vessel

    <p>Batch heat transfer data was experimentally determined for two phase (solid?liquid) systems in a baffled agitated vessel. Three iron oxide and water and two kaolin and water suspensions were evaluated and were found to be pseudoplastic. A total of 231 heating and cooling data points were …

    njit Repository record for Batch heat transfer to suspensions in an agitated vessel (opens in a new tab)

  10. Equipment design to measure the film coefficient of superheated steam flowing in conduits

    After reviewing all available literature on heat transfer to superheated steam at high temperatures and pressures, it was concluded that further investigation of this problem would be of value. The thesis was concerned with the derivation of three heat transfer film coefficient equations and their …

    vt Repository record for Equipment design to measure the film coefficient of superheated steam flowing in conduits (opens in a new tab)

  11. Turbine Blade Heat Transfer Measurements in a Transonic Flow Using Thin Film Gages

    Experimental heat transfer data has been collected at engine representative conditions in this work to use in future work to improve computational models. Tests were carried out in a transonic cascade wind tunnel with the data collected using thin film gages. All of the necessary development to use …

    vt Repository record for Turbine Blade Heat Transfer Measurements in a Transonic Flow Using Thin Film Gages (opens in a new tab)

  12. Film boiling of Freon 113, Normal Pentane, Cyclopentane, and Benzene from cylindrical surfaces at moderate pressures

    "An investigation of film boiling heat transfer in saturated pools of liquid Freon 113, Normal Pentane, Cyclopentane, and Benzene was made. The fluids were boiled from copper, cylindrical heat transfer surfaces, 3 inches long, and 0.55, 0.75, and 1.00 inch in diameter. The heat transfer elements …

    must-thes Repository record for Film boiling of Freon 113, Normal Pentane, Cyclopentane, and Benzene from cylindrical surfaces at moderate pressures (opens in a new tab)

  13. Spatially Resolved Heat Transfer Studies in Louvered Fins for Compact Heat Exchangers

    … the mechanisms that serve to increase heat transfer provides valuable knowledge to minimize the size and maximize the performance of compact heat exchangers. This document presents a detailed experimental heat transfer study of six scaled up louvered fin geometries that are typical of …

    vt Repository record for Spatially Resolved Heat Transfer Studies in Louvered Fins for Compact Heat Exchangers (opens in a new tab)

  14. The effects of an embedded vortex on a film cooled turbulent boundary layer.

    … coefficients ranging from 0.58 to 0.73. The heat transfer surface was designed to provide constant heat flux with adjustable temperature range. Experimental heat transfer results were obtained with a turbulent boundary layer only, with boundary layer and injection of film cooling, with …

    nps Repository record for The effects of an embedded vortex on a film cooled turbulent boundary layer. (opens in a new tab)

  15. Pressure drop and heat transfer characteristics of Refrigerant-114 boiling in a horizontal tube

    … to study the two-phase pressure drop and heat transfer characteristics of R-114 flowing in a horizontal tube. Flow regime studies were also performed as a part of this effort. Boiling temperature was varied from 100 to 250&deg;F and mass flux was varied from 0.12 to 3.4 x 10<sup>6</sup> …

    ut-knoxville Repository record for Pressure drop and heat transfer characteristics of Refrigerant-114 boiling in a horizontal tube (opens in a new tab)

  16. Two-phase flow pressure drop and heat transfer characteristics of refrigerants in vertical tubes

    … of refrigerants in vertical tubes. An experimental study was made of the flow regime, pressure drop, heat transfer coefficient, and critical heat flux of R-114 boiling in a 0.785-in.-ID, 10-ft-long vertical tube. The boiling temperature was varied in the range of 100 to 250&deg;F for …

    utk-theses Repository record for Two-phase flow pressure drop and heat transfer characteristics of refrigerants in vertical tubes (opens in a new tab)

  17. Experimental and Computational Investigations of Heat Transfer Systems in Fluoride Salt-cooled High-temperature Reactors

    … IV advanced reactor concepts. Predicting heat transfer in these systems accurately and reliably is one major challenge. Another is ensuring the safety of these systems during challenging operating conditions across the design basis envelope. Finally, achieving good economics to compete in …

    unm Repository record for Experimental and Computational Investigations of Heat Transfer Systems in Fluoride Salt-cooled High-temperature Reactors (opens in a new tab)

  18. Heat transfer analysis of components of construction exposed to fire

    … thesis describes a theoretical, numerical and experimental heat transfer studyof components of construction exposed to fire.Within the computational aspects of the work, one and two-dimensional finitedifference and finite element methods have been developed to determine thetransient temperature …

    salford Download PDF for Heat transfer analysis of components of construction exposed to fire (opens in a new tab)

Page 1 of 3