Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 138 for “"Experimental modal analysis"”.
-
Experimental Modal Analysis using Blind Source Separation Techniques
… principally discusses the identification of the modal parameters (i.e., natural frequencies, damping ratios and vibration modes) using output-only information, the excitation sources being considered as unknown and unmeasurable. To solve these kind of problems, a quite large selection of …
-
Analytical and Experimental Modal Analysis of a Micro Cantilever Beam
<p>Micro cantilever beams are used extensively in experimental nanomechanics. They were initially used as an integral component in atomic force microscopes (AFM) to map surfaces or objects with micro, nano, or even atomic precision. Recently, micro cantilever sensors are being studied for possible …
-
New method for structural damage identification using experimental modal analysis
Doctor of Philosophy (Ph.D.)
-
On the coupling of boundary element method and experimental modal analysis
Doctor of Philosophy (Ph.D.)
-
Updating low-profile FRP deck FE model using experimental modal analysis
… deck as a trailer bed. Detailed finite element analysis and experimental evaluation was carried out on the FRP trailer. The FRP deck used is a new system and has orthotropic material properties, therefore an FE model of deck that is validated through experimental data will ensure confidence in …
-
Experimental Modal Analysis of Business Jet Fuselage Tail Section Sub-Assemblies
Experimental modal testing is a technique through which the dynamic response characteristics of a system can be found. Parameters such as the natural frequencies and mode shapes of a system can be extracted through experimentation, and these results can be used to confirm computational models, …
-
An attempt to quantify errors in the experimental modal analysis process
Experimental modal analysis (EMA) techniques have become a popular method of studying the dynamic characteristics of structures. A survey of literature available reveals that experimental modal models resulting from EMA may suffer from inaccuracy due to a host of reasons. Every stage of EMA could …
-
Structural damage diagnosis using stereolithography, experimental modal analysis and finite element analysis
Doctor of Philosophy (Ph.D.)
-
Experimental Modal Analysis of a Half-Scale Business Jet Fuselage Tail Section
… dynamics of the aircraft rear cabin bulkhead experimentally. This is an initial step for structural dynamic modifications (SDM) which will yield reduced noise output and increased passenger comfort. Experimental modal analysis (EMA) identified dynamic properties of the fuselage (i.e. natural …
-
Improved approaches to the indirect force determination problems via experimental modal analysis
Solving the inverse problem, finding the applied forces knowing the system characteristics and the response, has been a difficult problem in structural dynamics. Insufficient accuracy in the system identification and uncorrelated content in the response exacerbate the ill-conditioned nature of the …
-
Effects of stinger axial dynamics and mass compensation methods on experimental modal analysis
… are investigated theoretically, numerically, and experimentally. It is found that the measured Frequency Response Function (FRF) can be underestimated if mass compensation is based on the stinger exciter-end acceleration and can be overestimated if the mass compensation is based on the …
-
A precision laser scanning system for experimental modal analysis: its test and calibration
… been widely used for dynamic measurements and experimental modal analysis. A laser scanning system that provides position accuracy, speed, and flexibility plays a key role in this technique. This thesis gives an overview of various laser scanning techniques and the requirements of a laser …
-
Experimental Modal Analysis of a Half-Scale Model Rear Twin-Engine Mounted Aircraft Fuselage Section
Experimental modal testing using an impact hammer is a commonly used method for obtaining the modal parameters of any structure for which the vibrational behavior is of interest. Natural frequencies and associated mode shapes of the structure can be extracted directly from measured FRFs (Frequency …
-
Validation of finite element model of a dish-stirling system by performing experimental modal analysis
… finite element model. This thesis describes the experimental modal analysis and finite element analysis of a Dish-Stirling system developed by Cleanergy. The purpose of the thesis is to perform experiments on the structure to compare simulated results with actual tests, in order to validate that …
-
FE-modeling and validation of a washing machine : Using experimental modal analysis and spin up test
… using finite elements and validated using experimental modal analysis. The parts already studied will also be modeled in order to match the results from the previous year's thesis works. The results show that each separate part correlates well in most modes when comparing mode shapes, …
-
Development of a laser-based automated mechanical mobility measurement system for one-dimensional experimental modal analysis
… of frequency response functions (FRFs) for experimental modal analysis where one-dimensional structural motion predominates. With this system FRFs are measured and recorded in a format that is readily imported into a popular modal analysis software. A scanning laser Doppler velocimeter is …
-
On the characterisation of structural damping in wind turbine blade composite materials : an approach using dynamic mechanical analysis and experimental modal analysis
… the advantages of these materials, current experimental approaches have failed to capture the directional variations in damping behaviour. This has led to an identifiable knowledge gap, which has resulted in non-optimised damping performance for wind turbine blades. This thesis addresses …
-
Computational mechanics of the full-scale and model-scale roll-on, roll-off (RORO) stern ramp and experimental modal analysis of the model-scale ramp and support
… use in the simulation model. Additionally, an experimental facility is being developed to simulate, at model scale, RORO operations. This thesis also documents the finite element analysis and experimental modal analysis of the primary structural components of the facility, specifically the …
-
Diagnostic test and analytical methods for resolving fan/motor vibration problems in air-conditioning units
… objective of this thesis is to develop test and analysis procedures to revise ASHRAE Standard 87.1 Standard for small (<36 in. diameter) propeller fans. Test and analysis procedures also need to be used to convert AHRAE Standard 87.1 - 1992 test results where the fan hub mobility is zero to …
Page 1 of 7