Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"Explosives Engineering"”.
-
Analysing technical tertiary training and education requirements for the South African explosives industry
South Africa is one of the largest producers of explosives in the world. The production of explosives is driven by the mines' need for explosives to produce the commodities needed by the economy. South Africa used to offer a diploma in explosives technology, but this qualification was discontinued …
-
Optimización del avance lineal en las labores de exploración y desarrollo de la Unidad Minera Santa María - Compañía Minera Poderosa S.A. con la aplicación de los criterios fundamentales de la ingeniería de la voladura
… descritos en el libro Rock blasting and explosives engineering que tiene como finalidad demostrar de manera práctica la importancia de realizar un adecuado diseño de la malla de perforación y voladura. Esto se llevó acabo, en primer lugar, con el mapeo geomecánico (RMR), el análisis del …
-
Shock wave interactions at explosive/metallic interfaces
"Metallic tubes filled with C-4 high-explosive and constructed of either aluminum or copper were tested during this study of high strain rate effects within thin metal cylinders performed as an adjunct to helical flux-compression generator research at the University of Missouri-Rolla. This study …
-
Analysis of effects of surface roughness and local surface imperfections on measured pressure
"When tests using pressure to characterize the performance or effects of an explosive are conducted in laboratory or other small scale, highly controlled settings, it is expected that any gages will be ideally mounted and there will not be any surface imperfections or roughness near the gage …
-
The influence of caprock on blast fragmentation distribution
<p>"This dissertation describes the development of a small-scale model of a caprock-laden quarry blast and discusses the results from that testing. The purpose of this testing was to provide insight into the reasons for poor caprock breakage during blasting.</p> <p>Small-scale test blocks were …
-
DISCRETE ELEMENT MODELING TO PREDICT MUCKPILE PROFILES FROM CAST BLASTING
… of a significant portion of overburden using explosives may enable an operation to increase mineral production, as existing equipment can be expected to retain its full productive capacity. Traditional cast blast design methodologies have relied largely on field observations from previous …
-
The behavior of sUAS under explosive loading conditions and implications for safe operating procedures
<p>"Drones are increasingly being used for tasks previously unimagined and the beneficial uses are evolving. The United States Congress has envisioned the possible uses of drones for both combating and conveying explosive threats and other harmful and destructive activities. Congress' intent is …
-
Underground Blast Fragmentation Modeling for Use in the Mine-to-Mill Strategy
… the powder factor, defined as the amount of explosives (weight) used to blast a certain amount of rock (weight or volume), can be easily correlated to downstream cost optimization. However, the relationship between powder factor, fragmentation, and downstream costs is not as evident for …
-
The mechanics of precision presplitting
<p>"Precision Presplitting is a widely used method of presplit blasting for the mining and construction industries. In recent years considerable effort has gone into the development of empirical equations based on field data to be able to better design the Precision Presplit for various rock types …
-
Effects of Downwash when Measuring Gas Concentration with UAV-Mounted Gas Sensors
<p>"This research concludes that the downwash region of a rotary-wing unmanned aerial vehicle (UAV) does not produce pressure variations substantial enough to cause significant changes in density-based gas concentration measurements. US regulations evaluate gas concentration as a function of gas …
-
Geometric Effects of Warfighters on Body Armor Fit and Protective Capabilities Against Shock Wave Energy
Body armor is a vital piece of protective equipment for warfighters to defend against threats, necessitating continued development to improve comfort, weight, and protection. However, female warfighters often wear unisex body armor, designed primarily for the male torso. Current research has …
-
THE EFFECT OF DELAY AND SEQUENCE ON BLASTING FRAGMENTATION RESULTS
… in front of a hole that changes with time due to explosives energy and gravity. Changes in dynamic confinement produce important changes in the final fragmentation of the shot. Given the relation between dynamic confinement and timing, it is suggested that the fragmentation be looked on charge by …
-
Pressure versus impulse graph for blast-induced traumatic brain injury and correlation to observable blast injuries
<p>"With the increased use of explosive devices in combat, blast induced traumatic brain injury (bTBI) has become one of the signature wounds in current conflicts. Animal studies have been conducted to understand the mechanisms in the brain and a pressure versus time graph has been produced. …
-
PREDICTING FRACTURE EXTENSION AROUND A BOREHOLE USING THE NUMERICAL DISPLACEMENT DISCONTINUITY METHOD
Prediction of blast damage radius is integral in the optimization of mining safety and production. The damage radius can be related to blasting variables such as fragmentation size as well as overbreak in hard rock. Various methods have been developed to predict and assess damage radius extension …
-
Relating detonation parameters to the detonation synthesis of nanomaterials
… adjusting the ratio of RDX to TNT decreased the explosives detonation pressure by 20% and increased the soot yield and concentration of SiC observed in the detonation products by 82% and 442% respectively”--Abstract, page iv.
-
Investigating the focusing effect of charge geometry with computer simulations, witness plates, and high-speed videography
"Scaled distance is used to calculate a safe standoff radius from the detonation of a known mass of an explosive. It has been shown that varying only the geometry of the charge significantly overdrives regions of the blast wave potentially resulting in hazardous overpressure levels at scaled …
-
Shock Wave And Vortex Ring Dynamics From Explosively Driven Shock Tunnels
"Blast and shock tubes are frequently used to create shock waves to study their effects and impacts on structures, humans, and personal protective equipment. These tubes are also found in other industries including wind tunnels for aerodynamic testing, jet engines for propulsion research, …
-
Modeling explosive lensing on a cylindrical body in air: A first step towards sealing an underwater offshore oil spill
… turning into ecological and financial disasters. Explosives can serve this need. This research examined how a circular implosive discontinuous explosive lens interacts with a cylindrical surface. The following research was designed to study the applicability of the Method this author developed to …
-
Investigation of anomalous data trends during coal dust explosibilty testing
Coal dust explosibility is a health and safety concern that has been a recognized hazard for over 100 years. Initial testing by the Author using a Siwek 20L apparatus recorded a secondary maximum pressure at higher dust concentrations (1,000-7,000g/m3) with Pulverized Pittsburgh Coal (PCC). Higher …
-
Investigating Detonation Parameters through the Plate Dent Test: A Novel Approach for Characterizing Detonation Curvature and Thickness
Detonation is the driving factor behind how an explosive, used in an array of applications, performs. Understanding and measuring detonation parameters of an explosive is key in explosive charge design and application. Currently, determining parameters is costly as the instrumentation needed is …
Page 1 of 2