Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 108 for “"Extreme loading"”.
-
Behavior of hollow-core fiber reinforced polymer-concrete-steel bridge columns under extreme loading
… (HC-FCS) bridge columns under extreme loading. The HC-FCS column consists of a concrete wall sandwiched between an outer fiber reinforced polymer (FRP) tube and an inner steel tube. The steel tube was embedded into a reinforced concrete footing with an embedded length of 1.6-1.8 …
-
Progressive Collapse Assessment of Steel and Concrete Composite Structures Subjected to Extreme Loading Conditions
Accidental events, such as impact loading and explosions, are rare events with a very low probability of occurrence, but their effects often lead to very high human losses and economical consequences. Vulnerability of structures to the effects of local damages and its mitigation are issues widely …
-
Computational Finite Element Analysis Of Extreme Loading Response Of Structural Insulated Panel (Sip) Building Subsystems
… response of the sip hut to a high velocity wind loading on the same wall assembly. The detailed connection response gathered from the abaqus model was evaluated and improvements to the currently comconnection detailing used in osb/eps sip construction are recommended to improve structural …
-
Determination of failure criteria and incorporation in FE codes for the simulation of ship’s hull in extreme loading conditions
… the response of ship structures under accidental loading conditions in a realistic manner. In particular, focus is placed on the investigation of the effect of material modeling, i.e. material curve in combination with a rupture criterion, as well as of the strain-rate effect and the mesh size on …
-
Advanced Three-dimensional Nonlinear Analysis of Reinforced Concrete Structures Subjected to Fire and Extreme Loads
… become a common design requirement. The extreme loading conditions associated with these hazards renders the concept of imposing generalized codes and standards guidelines for structural design unfeasible. Therefore, a general shift towards performance-based design is starting to dominate …
-
Magamp post-regulator applied to a quasi-resonant converter and magamp operation under extreme load condition in a PWM converter
… considered is the operation of a magamp under extreme loading conditions. Practical design equations are derived to allow magamp operation under extreme load conditions such as shutdown of output, foldback of output current and very light load (discontinuous operation). The other issue …
-
Reliability assessment of foundations for offshore mooring systems under extreme environments
… heavily loaded line and anchor are checked under extreme loading conditions (hurricane and loop current) with the system of lines intact and with one line removed. However, the performance of the entire mooring system depends more directly on the performance of the system of lines and foundations …
-
Simulation and analysis of priority classes in extended token based local area networks
… the protocol has favorable properties at the extreme loading conditions. in terms of bandwidth allocation to each class of traffic. However, such results also provide guidelines for selecting the system parameters to satisfy specific application requirements.</p>
-
Mechanism-based understanding of the plastic deformation of a magnesium alloy under multiaxial loading
… Structural metals are likely to experience extreme loading such as car crashes, bird strikes, ballistic impacts and high speed machining. It is well known that materials behave differently when undergoing extreme loading in comparison to quasi-static loading. However, polycrystalline …
-
Fatigue-Induced Failure in Horizontal-Axis Wind-Turbine (HAWT) Blades and HAWT Drivetrain Gears
… bending strength to withstand highly-rare extreme static-loading conditions (e.g., 50-year return-period gust, a short strong blast of wind); and (b) sufficient turbine blade 'flap-wise' bending stiffness in order to ensure that a minimal clearance is maintained between blade tip and the …
-
Improved Interface Bond Relationships of FRP-Strengthened Masonry Structures through Experimental and Numerical Simulations
Masonry walls are vulnerable to extreme loading and fibre-reinforced polymer (FRP) composites are a good solution for the reinforcement of un-reinforced masonry (URM) walls exposed to in-plane or out-of-plane loads. Collapse of walls in masonry structures is one of the main reasons for material …
-
Experimental methods for understanding the behavior and residual capacity of bolts and steel bolted connections under impulsive loads
… of bolted steel connections during and after extreme loading events is necessary to be able to predict and prevent progressive collapse of the structures. Connections ensure ductility and transfer loads to surviving structural elements after an extreme loading event. The research presented in …
-
HYBRID SHIP HESS ENERGY MANAGEMENT SYSTEM DESIGN USING MPC
… conditions, the ship generator will be put under extreme loading stress due to power fluctuations. This could potentially damage or shut down the generator. Having a Hybrid Energy Storage System (HESS) reduces the loading stress on the generator, as it can take over as an alternative power source. …
-
A fracture mechanics-based approach for modeling delamination of spray-applied fire-resistive materials from steel structures
… deformation levels in structural members due to extreme loading conditions such as earthquake, impact or explosion can lead to delamination of fire insulation from steel structures. Fire that can develop as a secondary event following an earthquake, explosion or impact (primary events) can cause …
-
Influence Of High-Intensity Turbulence On Laminar Boundary Layer Development On A Cylindrical Leading Edge: Enhancement To Eddy Diffusivity
… blades. These turbine vane components experience extreme loading conditions of both high temperature and high turbulence intensities exiting the combustor. The surface of the turbine blades has cylindrical leading edges that promote stabilizing flow accelerations. These convex surfaces can cause a …
-
Topology Optimization of Steel Shear Fuses to Resist Buckling
… to in-plane lateral displacements during extreme loading events such as earthquakes, that dissipate energy through localized shear or flexural yielding mechanisms. Although previous studies have reported that fuses with specific geometry can develop a stable hysteretic behavior, their …
-
Response of Two-Way Reinforced Masonry Infill Walls under Blast Loading
… the response of structural components under such extreme loading conditions. This is especially important for masonry components, where research has been limited due to the misconception that masonry (both reinforced and unreinforced) is an inadequate material for blast hardening applications. The …
-
Failure Simulations at Multiple Length Scales in High Temperature Structural Alloys
… materials at different length scale and under extreme loading conditions, and also to provide insights in the development of high-performance materials.</p> <p>In microscopic material behavior and failure modes, polycrystalline metals of interest include heterogeneous deformation field due to …
-
Metrological effectiveness of diagnostic techniques for post-tensioned concrete bridges
… into the structural behaviour under service and extreme loading conditions and into the accuracy of analytical and FE models for describing this behaviour. Subsequently, the accuracy and reliability of one of the most diffused SHM system, Acoustic Emission (AE)monitoring, is evaluated. Finally, …
-
Experimental Investigation of Ultra-High-Performance Concrete Panels Under Tornado Impact Loads
… are commercially available that satisfy the extreme loading conditions required by the International Code Council and National Storm Shelter Association, there is a need for a simple yet safe design which can be easily assembled and used for multiple purposes. New engineering materials, such …
Page 1 of 6