Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"Extrusion rate"”.
-
Synchronized material deposition rate control with path velocity on fused deposition machines
… are time varying as a function of material’s extrusion rate. An adaptive pole placement controller is designed to maintain the temperature of the material by manipulating the current supply to the heater as the extrusion rate vary. The tool path is first smoothed by a fifth order B-spline. The …
-
Extrusion-based 3D Printing and Characterization of Edible Materials
… printed object. In this thesis, room temperature extrusion-based 3D printing was investigated using a desktop 3D printer with a syringe extrusion system. Two hydrocolloids, modified starch and xanthan gum, were used as model material to study room temperature extrusion-based 3D printing. The …
-
Effects of Equal Channel Angular Extrusion on the Microstructure and Mechanical Properties of CoCrFeMnNi
… has been applied using the equal channel angular extrusion (ECAE) process where the billets are extruded through a 90° corner die achieving near simple shear deformation. The microstructure and mechanical properties of successfully extruded billets were reported using Scanning Electron Microscopy …
-
Bayesian Modeling and Adaptive Monte Carlo with Geophysics Applications
… a penalty term to constrain close consecutive rates, and using a mixture prior distribution to more accurately match certain circumstances in reality. We end the chapter with a description of the prediction procedure, which is the biggest advantage of the BBH in comparison with other existing …
-
Enhancing Power Side-Channel Detection of Attacks to Additive Manufacturing Systems
… Through this, we demonstated the detction of extrusion rate change attacks and smart void attacks; both previously thought undetectable with this method. The parameters that have the most significant impact on detectability and computation time have been identified, and recommendations are …
-
Investigating the effects of processing parameters in Reactive Extrusion Additive Manufacturing
Reactive Extrusion additive manufacturing (REAM) is an AM method in which a liquid thermoset feedstock is deposited and cured in-situ. Thermosetting resin is mixed with a catalyst and extruded, rapidly initiating an exothermic curing reaction which crosslinks the polymer chains. The robotic REAM …
-
Partial characterization of extruded collagen tubes with varied material deposition and orientation based on rotation rate and linear draw speed
This study established protocols for extrusion of collagen tubes from an extruder made by the ZOKO Corporation of Czechoslovakia. Using a viscous collagen base material, collagen tubes can be formed with changes in rotation rates from 0 rpm to 260 rpm and linear draw speeds from 383 mm/min to 1270 …
-
An Experimental Study of Deformation and Fracture of a Nanostructured Metallic Material
… the range 100nm- 1 mu m. Equal Channel Angular Extrusion (ECAE) is used to obtain three types of UFG-IF steel microstructures by varying the extrusion rate and processing temperature. The deformation behavior is investigated for the three UFG materials using round smooth bars and is compared …
-
Erupted magma volume estimates at Santiaguito and Pacaya Volcanoes, Guatemala using digital elevation models
… used to estimate volume changes and eruption rates between 1954 and 2001. The DEMs were generated from contour maps and aerial photography, which were analyzed in ArcGIS 9.0®. Because both volcanoes were growing substantially over the five decade period, they provide a good data set for …
-
Process parameter optimisation and thermal characterisation of coaxial multi-laser metal wire additive manufacturing with 316L stainless steel
… the relationship between laser power, extrusion rate and head speed and the resulting track geometry and layer quality. The research identifies the process parameters required to produce high-quality tracks repeatedly. New insights are developed into the use of machine learning to …
-
Volcanic processes during eruption and unrest: combining satellite and ground-based monitoring at Galeras and Santorini volcanoes
… from these flows inducing relaxation of the substrate. I also use a joint InSAR/GPS inversion technique to model the caldera-wide uplift observed during 2011-2012. I determine the optimal parameters for the deformation source and the temporal variation in volume change within the shallow magma …
-
InSAR measurements of volcano deformation on the Central American Volcanic Arc
… tephras and paleosols. At Santiaguito, I demonstrate the measurement of large-scale (∼10-200 m) topographic change from a small set of large baseline interferograms. Measurements of post-2000 lava fields allow me to estimate extrusion rate, map changes to flow morphology and make simultaneous …
-
Study of Friction Extrusion and Consolidation
Friction extrusion and consolidation was invented by The Welding Institute (Cambridge, UK) in the early 1990’s. It is related to simple extrusion processes with the primary difference being that the extrusion die rotates about the extrusion axis and the die is required to impart substantial …
-
In-Situ 3D Printed Biosilicate Nanoparticle-based Scaffolds for Rapid Bone Defect Healing
… including UV intensity for crosslinking MAG, extrusion rate, and printing speed were modified for the purpose of ISP. A critical sized calvarial defect in rat models were treated by ISP using the modified nanocomposite. Four weeks after the surgery, the treated region was characterized using …
-
Characterization of the Rheological, Optical, and Flow-Induced Structural Features of Polymer Liquid Crystals
… polymer, melt spun under varying conditions of extrusion rate, extrusion temperature, drawdown ratio, and die exit conditions. The objective was to determine the most effective process conditions for enhancing both orientation and tensile properties.</p> <p>The principal materials examined were …
-
Hollow fiber poly(vinyl chloride) (PVC) gas separation membranes prepared by dry/wet spinning production methods
… the same conditions to be optimal; low dope extrusion rate but high convective gas flow rate and residence time producing the best selectivity. The membrane permeation results were used alongside scanning electron microscopy images to model the active layer thickness in the membranes. This …
-
An investigation of bulk nanocrystalline copper fabricated via severe plastic deformation and nanoparticle consolidation
… copper nanoparticles using equal channel angular extrusion (ECAE). A critical assessment and correlation of the mechanical behavior of ECAE processed materials to the microstructure was established through the determination of the effect of strain level and strain path on the evolution of …
-
The effect of melt spinning and drawing variables on the structure and mechanical properties of isotactic polypropylenes
… spun under various spinning conditions at an extrusion temperature of 230°C. The structures of the spun filaments were characterized using wide angle x-ray diffraction, small angle x-ray scattering, birefringence and density measurements. The tensile mechanical properties were also …
-
3D printing and characterization of hydroxypropyl methylcellulose and methylcellulose for biodegradable support structures
… of poor dissolvability and toxic waste generated by the currently available support materials in the market. This paper is focused on extrusion-based 3D printing process of thermoset biopolymers to fabricate support structures using Material Extrusion (ME). In this study, three biodegradable …
Page 1 of 2