Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 4 of 4 for “"F-Temper"”.

  1. F-TEMPER VS O-TEMPER BRAZING OF 3003 ALUMINUM RETURN BENDS

    As-extruded (F-temper) 3003 return bends can provide cost savings over annealed (O-temper) return bends in aluminum heat exchangers. To assess if F-temper return bends are an alternative to the baseline O-temper bends, the grain structure, bending performance, and melting behavior were assessed …

    mtu Repository record for F-TEMPER VS O-TEMPER BRAZING OF 3003 ALUMINUM RETURN BENDS (opens in a new tab)

  2. Self-Piercing Riveting of High Ductility Al-Fe-Zn-Mg Casting Alloy (Nemalloy HE700) in F Temper: Modelling, Simulation and Experimental Analysis

    … die-cast aluminum alloy Nemalloy HE700 in F temper (as-cast) condition to dissimilar sheet materials, namely wrought aluminum alloy 6082-T6 and dual-phase steel DP600. The study demonstrates successful SPR joining of HE700 to these materials, with optimized process parameters and joint …

    mcmaster Repository record for Self-Piercing Riveting of High Ductility Al-Fe-Zn-Mg Casting Alloy (Nemalloy HE700) in F Temper: Modelling, Simulation and Experimental Analysis (opens in a new tab)

  3. Heat Treatment of Chrome Cobalt Alloy Orthodontic Wire

    … quantify the effects that several heat treatment temperatures have upon the ability of .016" x .022" type 1 chrome cobalt wire to resist permanent deformation. In addition, the changes in resistance to permanent deformation due to heat treatment at 900° F were studied in .018" stainless steel wire …

    loma-linda Repository record for Heat Treatment of Chrome Cobalt Alloy Orthodontic Wire (opens in a new tab)

  4. Weldability of AZ31B Magnesium Sheet by Laser Welding Processes

    … of strength was attributed to the difference in temper of the base metal and the weld metal. The base material was received in a half-hard H24 temper and the as solidified weld metal is naturally in the softer F temper. This also resulted in a corresponding 15% reduction in hardness. Failure …

    waterloo Repository record for Weldability of AZ31B Magnesium Sheet by Laser Welding Processes (opens in a new tab)