Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 161 for “"FE Modeling"”.
-
FE modeling of friction welding
… This thesis presents 3D thermo-mechanical modeling of OFW for pearlitic rails and 2D axisymmetric modeling of rotary friction welding of thin-walled pipes. Process parameters and sensitivity to material parameters have been studied for both welding methods. From the simulations, it is shown …
-
FE modeling of orbital friction welding
… has potential benefits e.g. reduced heat affected zone, expulsion of impurities from the welded area and a fast welding process. To assist in the design of this welding process, finite element (FE) models will be developed within the WRIST project.This thesis concerns the initial development …
-
Mechanical evaluation and FE modeling of composite sandwich panels
… objective of this research was to develop a modeling approach to predict response of composite sandwich panels under static bending conditions. Different model including 2D and 3D solid with isotropic and orthotropic material properties were attempted in advanced Finite Element (FE) software …
-
Fe Modeling In Support Of Vibration Based Damage Detection In Bridges
… relationship is explored through finite element modeling of primarily an experimental representation of a three-span concrete bridge structure located at the entrance to the main campus of The University of Mississippi in Oxford. Equivalent beam and 3D finite element models are created of an …
-
Graphical user interface for three-dimensional FE modeling of composite steel bridges
… been to design economical structures that are safe, serviceable and durable. In order to assess the performance and safety of these bridges, one of the analytical methods employed is finite-element (FE) modeling. This method involves breaking down the bridge structure into an assembly of …
-
Analysis of Delamination in Thick Section Composite Materials Using Homogenized FE Modeling
For thick section composites, the proposed interface model is incorporated into an existing homogenized constitutive model. The interface is treated as one of the layers constituting the repeating sublaminate, which is the basic building block of the thick section laminate. This homogenized model …
-
Microstructure-based FE Modeling and Measurements of Magnetic Properties of Polymer Matrix-Metal Composites
… modifying the magnetic composite is preferred. The most popular candidates for use in magnetic composites are magnetic powders and polymer composites. In particular, when metal alloys are chosen as magnetic powders they have high initial permeability, high saturation magnetization …
-
FE-modeling and validation of a washing machine : Using experimental modal analysis and spin up test
… and harder to correlate. There are some differences in eigenfrequencies between the model and the real steel shell. The problem with the side plate correlation of previous thesis works have been found to have minor importance when the steel shell had been fully assembled. The model used to …
-
Development of non-invasive procedure for evaluating absolute intracranial pressure based on finite element modeling
… methods available for measuring ICP may cause infection, haemorrhage or not reliable. A patient-specific correlation between ICP and an external vibration response was used for ICP evaluation, which based on finite element (FE) modeling. In FE modeling, a two dimensional FE model of human head …
-
VIBRATION SERVICEABILITY ASSESSMENT OF A LIGHTWEIGHT COLD-FORMED STEEL FLOOR SYSTEM
… serviceability criteria and further develop FE modeling methods for predicting the response of floor structures to walking events. A parametric, FE analysis study was conducted as a part of this study to identify parameters controlling the performance of this system. This study included …
-
Quantitative Computed Tomography Based Finite Element Modeling of Normal and Osteoarthritic Knees: In vivo Precision and Preliminary Comparisons
… (OA) is a debilitating joint disease which affects nearly 85% of the Canadian population over 75 years of age. OA not only affects cartilage, but it also alters subchondral bone (bone underlying cartilage). Altered subchondral bone could be related to OA initiation, progression, and OA-related …
-
Comparative Study of Nonlinear Acoustic and Guided Wave Methods for Structural Damage Detection
… For nonlinear acoustic tests, Finite Element (FE) modeling was used to calculate the crack edge divergence for three different crack modes. After that, FE modeling extracted the modal parameters (e.g. natural frequencies and mode shapes) of vibration modes for the corresponding crack modes. …
-
Quantitative assessment and mechanical consequences of bone density and microstructure in hip osteoarthritis
… in density and microstructure serve to stiffen the subchondral region thereby altering the mechanical environment (stresses and strains) within the epiphyseal and metaphyseal bone, and that these alterations trigger the aberrant cellular signaling and tissue damage characteristic of the …
-
Fit for Stability: Assessing the Role of Interference Fit in Cementless Knee Implant Stability
… ingrowth. This PhD thesis investigates how interference fit, the dimensional difference between implant and bone, affects primary stability in femoral and tibial components. Using cadaveric experiments and finite element (FE) modeling, the research evaluates micromotions, gap dynamics, and bone …
-
MECHANICAL METRICS OF THE PROXIMAL FEMUR ARE PRECISE AND ASSOCIATED WITH HIP MUSCLE PROPERTIES: A MAGNETIC RESONANCE BASED FINITE ELEMENT STUDY
Proximal femoral (hip) fractures are a life-threatening injury which affects 30,000 Canadians annually. Improved muscle and bone strength assessment methods may reduce fracture occurrence rates in the future. Magnetic resonance (MR) imaging has potential to assess proximal femoral bone strength in …
-
Two Dimensional Finite Element Modeling of Swift Delta Soil Nail Wall by "ABAQUS"
… the Swift Delta Wall using finite element (FE) modeling techniques. Valuable data were available from the instrumentation of the swift Delta Wall. These data were compared with the results of the FE modeling. This study attempts to answer the following two questions: 1. Is there potential …
-
Enhancing the Efficiency of Subject-Specific Knee Joint Biomechanical Simulations With Applications to Osteoarthritis
… with aging, which is ignored in finite element (FE) analyses using a generic knee geometry. The other challenge is related to the manual geometry reconstruction from biomedical images, which is a time-consuming process and not practical for clinical applications. Finally, estimating joint forces …
Page 1 of 9