Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 204 for “"FE Simulations"”.

  1. Modular Methods for Efficient FE² Simulations

    … next higher scale. If the finite element method (FEM) is utilized at both levels, the computationally expensive FE² scheme emerges. Hence, techniques are developed and applied throughout the present work, in order to mitigate the computational effort. Since the problem is caused by repetitive …

    qucosa-diss

  2. Control of geometry error in hp finite element (FE) simulations of electromagnetic (EM) waves

    The success of high accuracy Finite Element (FE) simulations for complex, curvilinear geometries depends greatly on a precise representation of the geometry and a proper mesh generation scheme. Sizable errors are introduced into the numerical predictions when the order of the geometric …

    texas Repository record for Control of geometry error in hp finite element (FE) simulations of electromagnetic (EM) waves (opens in a new tab)

  3. Analysis of strains in cast iron joints using FE-simulations and digital image correlation techniques

    … cylinder frames, in their engines. The service life of these components can thereby be significantly extended, reducing both replacement costs and environmental impact. The purpose of this thesis was to investigate the mechanical behavior of the Metalock method and study the material properties of …

    chalmers Repository record for Analysis of strains in cast iron joints using FE-simulations and digital image correlation techniques (opens in a new tab)

  4. Strength of welded thin-walled square hollow section T-joint connections by FE simulations and experiments

    … the fabrication of the T-joint connections can affect their strengths to different degrees. With modern advances in manufacturing technologies, there are many alternatives for the fabrication of the T-joint connections. For instance, in recent years, the use of the laser beam has become …

    sask Repository record for Strength of welded thin-walled square hollow section T-joint connections by FE simulations and experiments (opens in a new tab)

  5. Assessment of injuries to the lower leg and head of pedestrians in vehicle-to-pedestrian collisions through FE simulations

    … collisions through finite element (FE) simulations were analyzed. Today, pedestrian regulatory tests consist of subsystem tests using impactors that are made to hit the vehicle; there is no use of any pedestrian crash test dummy. Hence, the kinematics of the impactors used in the …

    chalmers Repository record for Assessment of injuries to the lower leg and head of pedestrians in vehicle-to-pedestrian collisions through FE simulations (opens in a new tab)

  6. Simulation of Ductile Fracture in Pipeline Steels Under Varying Constraint Conditions

    … has two major objectives: (1) to study the effect of non-singular T-stress (or constraint) variations on crack tip opening angle (CTOA) of pipeline steels using modified boundary layer (MBL), and (2) to simulate ductile crack propagation in pipeline steels using drop weight tear test (DWTT) …

    carleton Repository record for Simulation of Ductile Fracture in Pipeline Steels Under Varying Constraint Conditions (opens in a new tab)

  7. Post coarsening effects on membrane microstructure

    … structure were examined. Additionally, the effect uni-axial elongation has on pore shape was included in a sieve filtration model to look at the impact on performance. A deterministic approach was taken to predict membrane morphologies resulting from the matrix solidification step that occurs …

    texas Repository record for Post coarsening effects on membrane microstructure (opens in a new tab)

  8. Finite element simulations of welding distortions and predictions using deep Learning methods

    Finite element (FE) simulations, while effective, are computationally expensive, particularly for dynamic problems. Neural networks (NNs) offer a more efficient alternative. This study utilizes NNs to predict welding-induced distortions in a T-joint—a critical component in engineering structures …

    ubc Repository record for Finite element simulations of welding distortions and predictions using deep Learning methods (opens in a new tab) Download PDF for Finite element simulations of welding distortions and predictions using deep Learning methods (opens in a new tab)

  9. Applicability of using machine learning to improve computational efficiency of combined pre-crash and crash simulations

    Vehicle occupant safety is commonly evaluated in dynamic finite element simulations. Common finite element occupant models are human body models (HBM), active human body models (AHBM), and dummy models in pre-crash and crash simulations are time-consuming, and a simulation may cost dozens of hours …

    chalmers Repository record for Applicability of using machine learning to improve computational efficiency of combined pre-crash and crash simulations (opens in a new tab)

  10. Deformations and Stresses in Welded Panels: Development and analysis of a simulation procedure for two-pass fillet welding of a stiffener to a plate

    … and Offshore Structures Congress (ISSC) 2022 Conference. The goal of this project is to further develop and analyse an existing simulation procedure for two-pass fillet welding of a stiffener to a plate with the aim to find what simplifications that can be made in the modelling. The results from …

    chalmers Repository record for Deformations and Stresses in Welded Panels: Development and analysis of a simulation procedure for two-pass fillet welding of a stiffener to a plate (opens in a new tab)

  11. A two-scale thermomechanical computational model for reinforced concrete frame structures

    … is determined by nonlinear finite elements (FE) simulations of its corresponding potential damage zone under different loading modes at different temperatures, where the thermo-dependent material properties for the FE simulations are determined based on the existing literature and a set of …

    umn Repository record for A two-scale thermomechanical computational model for reinforced concrete frame structures (opens in a new tab)

  12. Enhancing microbolometer performance at terahertz frequencies with metamaterial absorbers

    … individual optical properties. Finite Element (FE) simulations revealed that an array of squares above a ground plane separated by a dielectric is efficient, yet thin. Metamaterials were fabricated and their absorption characteristics were measured using a Fourier Transform Infrared Spectrometer …

    nps Repository record for Enhancing microbolometer performance at terahertz frequencies with metamaterial absorbers (opens in a new tab)

  13. Determination of material constitutive models using orthogonal machining tests

    … steel by comparing results of finite element (FE) simulations of orthogonal machining with experimental results. A large number of FE simulations are carried out using different values for each of the five unknown parameters of the JC model. Second-order polynomials are fitted to the results of …

    wichita-thes Repository record for Determination of material constitutive models using orthogonal machining tests (opens in a new tab)

  14. Stochastic Computation of Quasibrittle Fracture

    Continuum finite element (FE) models of quasibrittle structures suffer from the spurious mesh sensitivity, due to strain localization arising from the softening constitutive behavior of quasibrittle materials. Numerical techniques known as the localization limiters, have been developed to mitigate …

    umn Repository record for Stochastic Computation of Quasibrittle Fracture (opens in a new tab)

  15. Computational modeling of fibrous biological tissues and bio-inspired materials

    … methods with experimental technologies is effective for investigating these relationships. A new computational framework is proposed to simulate the mechanical behavior of fibrous biomaterials. First, the microscopic fiber structure is synthetically generated via a random walk algorithm and …

    rice Repository record for Computational modeling of fibrous biological tissues and bio-inspired materials (opens in a new tab)

  16. Study on ice-induced load transmission in CP-mechanism

    … resulted from ultimate blade failure load (Fex) in heavy ice load condition, mainly focusing on the force on crank pin (Fcrp). Various FE simulations are carried out to investigate the load transmission in CP-mechanism for two hub models. Firstly, a simplification is come up with by using a …

    chalmers Repository record for Study on ice-induced load transmission in CP-mechanism (opens in a new tab)

  17. Transcatheter Mitral Valve Replacement: Structural and Hemodynamic Analysis

    … PERIMOUNT Magna mitral valve and finite element (FE) simulations were conducted to obtain the stress distribution on both valves. Moreover, to visualize the flow field within the left heart, steady-state computational fluid dynamics (CFD) simulations were run. The FE simulations demonstrated that …

    denver Repository record for Transcatheter Mitral Valve Replacement: Structural and Hemodynamic Analysis (opens in a new tab)

  18. STRENGTH OPTIMIZATION OF A HIGH SYMMETRY INTERLOCKING MICRO-ARCHITECTURE POLYMER COMPOSITE

    … The responses from Finite Element (FE) simulations were studied using Analysis of Variance (ANOVA) methods to consolidate the design space in successive steps. The results from ANOVA are used to identify significant parameters which can be used to simplify further optimization and …

    mtu Repository record for STRENGTH OPTIMIZATION OF A HIGH SYMMETRY INTERLOCKING MICRO-ARCHITECTURE POLYMER COMPOSITE (opens in a new tab)

  19. STUDY OF TRIMMING BEHAVIOR OF AUTOMOTIVE MAGNESIUM SHEET MATERIALS

    … set-up and complementary finite element (FE) simulations of the lab-based experiments. The effects of the trimming process parameters that included tool setup configuration, punch speed, clearance, sheet thickness and sheet orientation (rolling and transverse directions) on the quality of …

    mcmaster Repository record for STUDY OF TRIMMING BEHAVIOR OF AUTOMOTIVE MAGNESIUM SHEET MATERIALS (opens in a new tab)

Page 1 of 11