Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 79 for “"FEA simulation"”.

  1. Wear modelling and FEA simulation for dry sliding contacts

    The thesis presents a Finite Element Analysis (FEA) based wear modellingalgorithm devised in the course of the reported research activity. FEA is used as a tool to calculate nodal pressures at the contact region for small sliding steps. These pressures are then inputted to a customised wear …

    adelaide Repository record for Wear modelling and FEA simulation for dry sliding contacts (opens in a new tab)

  2. Study Of Chaotic Ultrasound And Frequency Sweep Excitations In Sonic Ir Nde Technology

    … our study is known as finite element analysis (FEA). According to test process of Sonic IR technology, some special technologies were developed in FEA simulation, such as creating cracks with flat contact surfaces in turbine blade models, two-step simulation method to apply static force and then …

    wayne-thes Repository record for Study Of Chaotic Ultrasound And Frequency Sweep Excitations In Sonic Ir Nde Technology (opens in a new tab)

  3. Switched reluctance machine electromagnetic design and optimization

    … method is developed, which uses the current-fed FEA simulation as the SRM performance estimation tool. This method serves as the main innovation of this research work. First, the proposed method is applicable to any SRM topologies and dimension, and no detailed modeling of a specific SRM …

    gatech Repository record for Switched reluctance machine electromagnetic design and optimization (opens in a new tab)

  4. PREDICTION OF SUBSURFACE DAMAGE DURING MACHINING NICKEL-BASED SUPERALLOYS

    … are developed for finite element analysis (FEA) simulation and applied with the ABAQUS/Explicit solver. Orthogonal cutting experiments are conducted to verify FEA results. Recrystallization techniques are utilized for estimation of the depth of subsurface damage. By comparing the subsurface …

    clemson Repository record for PREDICTION OF SUBSURFACE DAMAGE DURING MACHINING NICKEL-BASED SUPERALLOYS (opens in a new tab)

  5. A computerized pre-clinical test for cemented hip prostheses based on finite element techniques

    … scenario, based on computer finite element (FEA) simulation. An extensive description is given of the FEA simulation developed to simulate the mechanical failure processes involved: creep and microcrack accumulation in the cement. The FEA tool can be used to predict cement crack formation and …

    radboud Repository record for A computerized pre-clinical test for cemented hip prostheses based on finite element techniques (opens in a new tab) Download PDF for A computerized pre-clinical test for cemented hip prostheses based on finite element techniques (opens in a new tab)

  6. Thermal-mechanical stress measurement and analysis in three dimensional interconnect structures with Raman spectroscopy

    … determined with reasonable assumption based on FEA simulation. There shows good agreements between FEA simulation and experimental data in general.

    texas Repository record for Thermal-mechanical stress measurement and analysis in three dimensional interconnect structures with Raman spectroscopy (opens in a new tab)

  7. Developing an efficient FEM structural simulation of a fan blade off test in a turbofan jet engine

    This work develops a methodology for full engine FEA simulation of the fan blade off containment test for a jet engine using LS-Dyna. The fan blade off containment test is a safety requirement involving the intentional release of a fan blade when the engine is running at full power. The released …

    sask Repository record for Developing an efficient FEM structural simulation of a fan blade off test in a turbofan jet engine (opens in a new tab)

  8. MILITARY ASSAULT BRIDGING STRUCTURAL ANALYSIS AND LOAD TESTING

    … of bracing with theoretical computation, FEA simulation and full-size bridge engineering testing. A new method has been developed out to calculate bending loads used to define and validate required lateral and torsional brace stiffness and strength in beam structure. In the analyses of …

    mtu Repository record for MILITARY ASSAULT BRIDGING STRUCTURAL ANALYSIS AND LOAD TESTING (opens in a new tab)

  9. AN AUGMENTED REALITY BASED PLATFORM FOR INTERACTIVE FINITE ELEMENT ANALYSIS

    Conventional finite element analysis (FEA) is conducted in offsite and virtual environments, i.e., computer-generated graphics, which does not promote a user’s perception and interaction, and limits its applications. With the purpose of assisting FEA interpretation using augmented reality (AR) …

    nus Repository record for AN AUGMENTED REALITY BASED PLATFORM FOR INTERACTIVE FINITE ELEMENT ANALYSIS (opens in a new tab) Download file for AN AUGMENTED REALITY BASED PLATFORM FOR INTERACTIVE FINITE ELEMENT ANALYSIS (opens in a new tab)

  10. A 3d printing and moulding method of the fabrication of a miniature voice coil motor actuator

    … design was used in the finite element analysis (FEA) simulation to examine the effect of dimension variations on the eigenfrequencies. Frequency response of the actuator was characterized and the experimental results matched with the simulation results between 1 and 450 Hz showing less than 5% …

    ubc Repository record for A 3d printing and moulding method of the fabrication of a miniature voice coil motor actuator (opens in a new tab) Download PDF for A 3d printing and moulding method of the fabrication of a miniature voice coil motor actuator (opens in a new tab)

  11. CAD/CAE of Blanks for Post-Machining Stretch Forming of Complex Aircraft Panels

    … difficulty on the curved surface. To study the feasibility and reliability of this method, the commercial tools of CAD software CATIA and FEA simulation software were utilized for research, in which the CAD data of the FEA simulation output was analysed by the CAD software and then input the …

    concordia Download PDF for CAD/CAE of Blanks for Post-Machining Stretch Forming of Complex Aircraft Panels (opens in a new tab)

  12. Robust design using sequential computer experiments

    Modern engineering design tends to use computer simulations such as Finite Element Analysis (FEA) to replace physical experiments when evaluating a quality response, e.g., the stress level in a phone packaging process. The use of computer models has certain advantages over running physical …

    tamu Repository record for Robust design using sequential computer experiments (opens in a new tab)

  13. A drifter-based self-powered piezoelectric sensor for ocean wave measurements

    … parameters. Next, finite element analysis (FEA) simulations using the commercial software COMSOL-Multiphysics have been carried out with the help of a coupled physics analysis of Solid Mechanics and Electrostatics Modules to achieve the output voltages. An experimental prototype has been …

    cork Repository record for A drifter-based self-powered piezoelectric sensor for ocean wave measurements (opens in a new tab)

  14. Investigation of Failure Behaviour of a Glass-Fibre Reinforced Thermoplastic Composite

    … fibre orientations. In Finite Element Analysis (FEA), this failure metric is incorporated with the simulations as a virtual tool to predict failures of the GFRP material. From the experimental results, failure envelopes with the failure metric based on the principal strain and fibre strain are …

    anu Repository record for Investigation of Failure Behaviour of a Glass-Fibre Reinforced Thermoplastic Composite (opens in a new tab)

  15. A Method for the Characterization and Selection of Compliant Joints

    … parametric equations. A Finite Element Analysis (FEA) simulation is used to validate each of the individual models. The selection algorithm solves the models systematically using the design requirements set by the user. Results are presented to the user in the form of a list of compliant joints …

    clemson Repository record for A Method for the Characterization and Selection of Compliant Joints (opens in a new tab)

  16. Combined Stressors in Reliability Failure Modes in Flip-Chip Electronic Packaging

    … carry capacity. This dissertation utilizes FEA simulation and an experimental approach to study the solder’s reliability. First, the SiC MOSFET packaging method using flip-chip technology has been studied to achieve an optimum arrangement that improves reliability and electrical …

    arkansas Repository record for Combined Stressors in Reliability Failure Modes in Flip-Chip Electronic Packaging (opens in a new tab)

  17. PCB Busbar Design and Verification for a Multiphase SiC-based All-electric Aircraft Powertrain Converter

    … operated at 40,000 ft. Finite-element analysis (FEA) simulation studies of the PCB busbar are conducted to optimize the electric field intensity. Busbar modeling technic is also discussed to derive the current distribution and extract the loss. The measured partial discharge inception voltage …

    vt Repository record for PCB Busbar Design and Verification for a Multiphase SiC-based All-electric Aircraft Powertrain Converter (opens in a new tab)

  18. Data-Driven Study of Polymer-Based Nanocomposites (PNC) – FAIR Online Data Resource Development and ML-Facilitated Material Design

    … curating experimental PNC data from literature, simulation data can be generated and curated much faster due to its computational nature. Thus, the NanoMine schema and template for experimental data were expanded to support popular simulation methods like Finite Element Analysis (FEA) with high …

    duke Repository record for Data-Driven Study of Polymer-Based Nanocomposites (PNC) – FAIR Online Data Resource Development and ML-Facilitated Material Design (opens in a new tab)

Page 1 of 4