Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 148 for “"FEM Simulation"”.

  1. FEM simulation of ultrasonic wave propagation in solid rods

    … of the ultrasonic wave propagations. In the FEM analyses, each specimen with the same input is generated for comparing with the experimental results. In addition, the input frequency, element size, and integration time step are discussed to evaluate the accuracy of the FEM results. The output …

    wvu Repository record for FEM simulation of ultrasonic wave propagation in solid rods (opens in a new tab)

  2. COUPLED CFD-FEM SIMULATION OF FLOATERS WITH MOORING SYSTEMS

    … with an in-house nonlinear finite element (FEM) mooring analysis program, MOORING3D, to study the dynamic responses of a floating body with a mooring system in complicated environmental conditions. A six degree-of-freedoms (DoFs) motion solver based on the 4th order Runge-Kutta scheme is …

    tamu Repository record for COUPLED CFD-FEM SIMULATION OF FLOATERS WITH MOORING SYSTEMS (opens in a new tab)

  3. FEM simulation of ion transport in a muliplex nanopore biosensor

    With the rise in demand for point-of-care diagnostics, the rise of biosensing technology has been instrumental in meeting said demand. Out of the many trends in biosensing technology, the most promising one is multi-detection and nanotechnology. Nanotechnology shows lots of promise in being …

    iastate Repository record for FEM simulation of ion transport in a muliplex nanopore biosensor (opens in a new tab)

  4. FEM Simulation of Acoustic Radiation from Electric Drivelines in Heavy Trucks

    … efficient method based on finite element method (FEM) to simulate the noise emission from an electric drive unit (EDU) during excitation using the commercial software Abaqus. Using structural-acoustic interaction in Abaqus, the electric drive unit is coupled to the exterior acoustic domain (air) …

    chalmers Repository record for FEM Simulation of Acoustic Radiation from Electric Drivelines in Heavy Trucks (opens in a new tab)

  5. Orthogonal SAW Biosensor FEM Simulation Based on ST-Quartz with Crystalline ZnO Guiding Layer

    … for a biosensor. Finite-element modeling (FEM) has been used to predict the behavior of complex materials with fair reliability. First, the resonant frequency of the Love mode (which is a layer-guided SH-SAW) will be determined for a certain thickness of ZnO guiding layer via the transient …

    usf Repository record for Orthogonal SAW Biosensor FEM Simulation Based on ST-Quartz with Crystalline ZnO Guiding Layer (opens in a new tab)

  6. GENERATION, MECHANICAL AND STATISTICAL ANALYSIS, AND FEM SIMULATION OF FRACTURE OF REPEATABLE RANDOM ROUGH SURFACES

    … couples experimental and statistical theory, and FEM to extend knowledge of life of materials from initial service surface conditions through surface damage accumulation. Statistical moments and other parameters were correlated with fracture locations probability (H/N), versus auto correlation …

    vcu Repository record for GENERATION, MECHANICAL AND STATISTICAL ANALYSIS, AND FEM SIMULATION OF FRACTURE OF REPEATABLE RANDOM ROUGH SURFACES (opens in a new tab)

  7. Investigation of ultrasonic pressure distribution in a sonoreactor and a washing tank by FEM simulation

    … washing tank by finite element method (FEM) by taking into account the coupling effect between the acoustic pressure in water and the mechanical vibration of the solid structure. To examine the ultrasound intensity distribution in a sonoreactor with a fixed volume of water, the …

    uiuc Repository record for Investigation of ultrasonic pressure distribution in a sonoreactor and a washing tank by FEM simulation (opens in a new tab)

  8. Mechanics and FEM simulation of active vibration control in structural systems by using internal mass reconfiguration

    … solutions possible for the pendulum. Numerical simulations show that the periodic relative motion of the mass with a constant frequency normally tends to amplify vibration. In order to obtain a continuous attenuation, a proper synchronization method is required. It is demonstrated that such …

    sask Repository record for Mechanics and FEM simulation of active vibration control in structural systems by using internal mass reconfiguration (opens in a new tab)

  9. Finite element simulation of Durelli's photoelastic stress minimization method for shape optimization

    Finite Element Method (FEM) was used to simulate the Photoelastic Stress Minimization (PSM) method developed by Durelli to solve the problem of finding the optimal stress raiser profiles in isotropic and advanced composite structures. In Durelli's method, material in lowly stressed regions of the …

    vu-aus Download PDF for Finite element simulation of Durelli's photoelastic stress minimization method for shape optimization (opens in a new tab)

  10. A Simulation By Using Cohesive Zone Model For Indentation Test In Thin-Film/Substrate Systems

    This master thesis presents finite element simulation of interface adhesion properties and interfacial delamination cracking processes of thin film systems during indentation experiments using wedge-shape indenters. The cohesive zone model based on traction separation law (T-S) is employed during …

    nus Repository record for A Simulation By Using Cohesive Zone Model For Indentation Test In Thin-Film/Substrate Systems (opens in a new tab) Download file for A Simulation By Using Cohesive Zone Model For Indentation Test In Thin-Film/Substrate Systems (opens in a new tab)

  11. Analysis of resonant ultrasound spectroscopy as a technique to evaluate material property changes

    … on these measurements. Finite Element Method (FEM) is used to get the frequencies of the modes of free vibration for the sample model. This result depends on the elastic constant values used in the FEM simulation. Studies were conducted to confirm the accuracy of the FEM model, and determine …

    missouri Repository record for Analysis of resonant ultrasound spectroscopy as a technique to evaluate material property changes (opens in a new tab)

  12. Development of a cell cross flow system

    … CFS design process, finite element method (FEM) simulation, and cross flow experiments are detailed in this thesis. The CFS was successful in capturing MT Jurkat cells, and the experimental results were consistent with the FEM simulation analysis. It was found that the CFS was capable of …

    uvic Repository record for Development of a cell cross flow system (opens in a new tab)

  13. Fast to run model for thermal fields during metal additive manufacturing simulations

    Additive Manufacturing simulations for thermal fields are computationally expensive because of the highly disparate length and time scales involved and can sometimes take days to run. Improving the speed of these simulations enables multiple virtual experiments to be run to understand the effects …

    ubc Repository record for Fast to run model for thermal fields during metal additive manufacturing simulations (opens in a new tab) Download PDF for Fast to run model for thermal fields during metal additive manufacturing simulations (opens in a new tab)

  14. Planar Magnetics Design For Low-voltage Dc-dc Converters

    … as small footprint. A novel methodology based on FEM simulation is proposed. By introducing Maxwell 2D simulator, optimal interleaving structures can be found to reduce AC losses that cannot otherwise be accounted for by conventional method. And 3D simulator is employed to make the results more …

    ucf Repository record for Planar Magnetics Design For Low-voltage Dc-dc Converters (opens in a new tab)

  15. Wireless Power Transfer for Oil Well Applications

    … to the transmitting and receiving coils. We use FEM simulation software to analyze the magnetic flux link improved by the ferrite structures. A CAD model is used to extract FEM field solutions to estimate the power transfer efficiency, and the estimated efficiency is compared and validated with …

    houston Repository record for Wireless Power Transfer for Oil Well Applications (opens in a new tab)

  16. Quantitative Modeling of Polymer Scratch Behavior

    … three-dimensional finite element method (FEM) parametric study has been performed by incorporating key characteristics of polymer constitutive behavior to investigate the effect of material parameters and surface properties on the evolution of scratch-induced deformation in polymers, along …

    tamu Repository record for Quantitative Modeling of Polymer Scratch Behavior (opens in a new tab)

  17. Eddy current displacement sensor with LTCC technology

    … target blade were considered. Subsequently, the FEM method was used for further calculations. It was found via modal analysis that the position over the sharp end of a blade tip is the optimal mounting position for a sensor. Electromagnetic analysis showed that the sensitivity of the sensor …

    freiburg-diss Repository record for Eddy current displacement sensor with LTCC technology (opens in a new tab)

  18. Θεωρητική και πειραματική μελέτη μη- καταστροφικού ελέγχου σιδηρομαγνητικών υλικών με ηλεκτρομαγνητικές μεθόδους

    … the defects’ depth characterization.In general, simulation can be used instead of experiment for difficult geometries and for cases in which the experimental process is not easy. Nevertheless, the utilization of finite element method (FEM) software for the non-linear simulation remains a …

    greece Repository record for Θεωρητική και πειραματική μελέτη μη- καταστροφικού ελέγχου σιδηρομαγνητικών υλικών με ηλεκτρομαγνητικές μεθόδους (opens in a new tab)

Page 1 of 8