Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 205 for “"FEM analysis"”.

  1. FEM Analysis of Quasi-Planar Transmission Lines

    The high frequency wireless communication and high-speed electronics industries are demanding increasingly more sophisticated microwave integrated circuits. Today, conventional microwave integrated circuits have used single substrate planar microstrip line or suspended and inverted microstrip …

    sask Repository record for FEM Analysis of Quasi-Planar Transmission Lines (opens in a new tab)

  2. Welding sequence optimization using local/global FEM analysis

    … for the optimization and finite element analysis for the prediction of induced distortions was shown that specific welding sequences might considerably reduce distortions. Additionally, optimizations may be feasible in the industry when considered the time spent on the optimization of a …

    brazil-uerj Repository record for Welding sequence optimization using local/global FEM analysis (opens in a new tab)

  3. FEM analysis with DSC modeling for materials in chip-substrate systems

    … Further, a 3-D DSC FEA (finite element analysis) program was used to simulate the same stress-strain behaviors of solder joints at different temperatures and strain rates. The results from back prediction and 3-D FEA simulation show that the test data have been better characterized by …

    arizona-thes Repository record for FEM analysis with DSC modeling for materials in chip-substrate systems (opens in a new tab)

  4. Local FEM Analysis of Composite Beams and Plates: Free-Edge effect and Incompatible Kinematics Coupling

    … critical to promote delamination. An adequate analysis method for this would be the use of a full three-dimensional analysis model. However it’s computational cost is significant. Composites are often rather thin planar structures, allowing the use of reduced dimensional models, which are also …

    poli-torino Repository record for Local FEM Analysis of Composite Beams and Plates: Free-Edge effect and Incompatible Kinematics Coupling (opens in a new tab)

  5. Solution strategies for second order, nonlinear, one dimensional, two point boundary value problems by FEM analysis

    This research demonstrates the Galerkin FEM's ability to provide approximate solutions of second order, nonlinear, one dimensional, two point boundary value problems. The research concentrates on the development of linearization, iteration, and interpolation strategies for the solution of …

    nps Repository record for Solution strategies for second order, nonlinear, one dimensional, two point boundary value problems by FEM analysis (opens in a new tab)

  6. MACHINABILITY STUDY AND FEM ANALYSIS OF UD-CFRP COMPOSITE MTM 44-1 MATERIAL UNDER ORTHOGONAL CUTTING CONDITION

    … the machining process. A Finite Element Model (FEM) was created to predict cutting forces during orthogonal cutting of Unidirectional Carbon Fibre Reinforce Polymer (UD-CFRP) composite material. The material analysed was a MTM 44-1 low density toughened epoxy matrix system particularly suited …

    whiterose Download PDF for MACHINABILITY STUDY AND FEM ANALYSIS OF UD-CFRP COMPOSITE MTM 44-1 MATERIAL UNDER ORTHOGONAL CUTTING CONDITION (opens in a new tab)

  7. Geotechnical Laboratory Testing for 2-D FEM Analysis of Geomorphic and Planar Sloped Caps and Covers for Sustainable Mine Refuse Deposition

    … cap and cover system for slope stability. The analysis consisted of seepage modeling, coupled with slope stability to get a worst-case scenario factor of safety after infiltration from a 100-year storm event had occurred. The geomorphic slope had increased infiltration compared to the …

    wvu Repository record for Geotechnical Laboratory Testing for 2-D FEM Analysis of Geomorphic and Planar Sloped Caps and Covers for Sustainable Mine Refuse Deposition (opens in a new tab)

  8. Establishing a finite element model to determine the tensile strength of additively manufactured PA2200 parts

    … mostly optimised using finite element method (FEM) analysis where there is increased difficulty in designing a mathematical prediction model for each individual structure. Most software programs use FEM analysis for designing and optimising structures with isotropic material properties, but the …

    nwu-za Repository record for Establishing a finite element model to determine the tensile strength of additively manufactured PA2200 parts (opens in a new tab)

  9. Dynamic Test/Analysis Correlation Using Reduced Analytical Models

    Test/analysis correlation is an important aspect of the verification of analysis models which are used to predict on-orbit response characteristics of large space structures. This thesis summarizes the study of using reduced analysis models for performing dynamic test/analysis correlation. The …

    odu Repository record for Dynamic Test/Analysis Correlation Using Reduced Analytical Models (opens in a new tab)

  10. Laboratory model tests to assess the effects of scale and stress on the stiffness of laterally loaded foundations in sand

    … of a newly developed 3D Finite Element Method (FEM) analysis as well predictions from the American Petroleum Institute (API), which utilizes the p-y method. A repeatable and consistent methodology to conduct a large number of 1-g lateral load tests in sand using spheres to model the state of …

    texas Repository record for Laboratory model tests to assess the effects of scale and stress on the stiffness of laterally loaded foundations in sand (opens in a new tab)

  11. Tensile Fracture Mechanisms of Ferritic/martensitic Structural Materials

    X-ray measurements and analysis not only support the hypothesis of the association between critical stress and critical interfacial strength, but also offer a new method to determine the true strain/stress behavior during deformation. This method is called the Universal Micro-structural …

    uiuc Repository record for Tensile Fracture Mechanisms of Ferritic/martensitic Structural Materials (opens in a new tab)

  12. Analysis of stone column reinforced foundation using finite element method

    This study performed the finite element analysis of stone column reinforced foundation and matching scheme for conversion of axisymmetric stone column unit cell into equivalent plane strain. The parameter matching scheme consisting of stiffness and permeability matching procedures is reported. The …

    nus Repository record for Analysis of stone column reinforced foundation using finite element method (opens in a new tab) Download file for Analysis of stone column reinforced foundation using finite element method (opens in a new tab)

  13. Characterization on unbound materials for flexible pavement design

    … into computer-based Finite Element Modeling (FEM) most often this relatively new arena of FEM based pavement design analysis still limits and overly simplifies unbound material behavior in modeling and analysis procedures. The majority of current research into these FEM analysis procedures …

    greece Repository record for Characterization on unbound materials for flexible pavement design (opens in a new tab)

  14. Grasping contact analysis of viscoelastic materials for design and development of an endoscopic tactile sensor

    … study, analytical and Finite Element Method (FEM) are employed to determine the contact pressure on the surface of a tissue being grasped by an endoscopic grasper, in Minimally Invasive Surgery (MIS). Normally, an endoscopic grasper has corrugated teeth in order to maintain a firm grip on …

    concordia Download PDF for Grasping contact analysis of viscoelastic materials for design and development of an endoscopic tactile sensor (opens in a new tab)

  15. Validation of a Computational Model for Predicting Fatigue Life

    … are demonstrated. A high-resolution plane strain FEM analysis that resolves the strain field near a stress concentration is shown to be necessary to achieve accurate predictions of fatigue crack nucleation and fatigue crack growth.

    carleton Repository record for Validation of a Computational Model for Predicting Fatigue Life (opens in a new tab)

  16. Experimental database, analysis and design of noncompact and slender concrete-filled steel tube (CFT) members

    … is compiled. Detailed 3D finite element method (FEM) models are developed for noncompact and slender CFT members, and benchmarked using experimental results. The AISC 360-10 design provisions for noncompact and slender CFT members are then evaluated by both the experimental test results and …

    purdue-thes Repository record for Experimental database, analysis and design of noncompact and slender concrete-filled steel tube (CFT) members (opens in a new tab)

Page 1 of 11