Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 35 for “"FEM method"”.

  1. A three-dimensional FEM method to predict current densities induced in conducting objects exposed to ELF magnetic fields.

    This thesis studies a numerical method to predict the current densities induced in conducting objects exposed to Extremely Low Frequency (ELF) magnetic fields. The Three Dimensional Finite Element Method (3-D FEM) was chosen to accomplish this task. The 3-D FEM numerical formulation is derived and …

    ottawa-retro Repository record for A three-dimensional FEM method to predict current densities induced in conducting objects exposed to ELF magnetic fields. (opens in a new tab)

  2. Finite element analysis of permanent indentation of solids due to low velocity impact

    … range of velocities. For the MPC Overpack, the FEM method produced values that appear reasonable, but there is no valid compariSon FEM method can be used as a guidance within limitation to ascertain the reuse of the MPC Overpack.

    unlv Repository record for Finite element analysis of permanent indentation of solids due to low velocity impact (opens in a new tab) Download PDF for Finite element analysis of permanent indentation of solids due to low velocity impact (opens in a new tab)

  3. Numerical simulation of nonlinear response of moored floating structures to steep waves

    … Arbitrary Lagrangian-Eulerian Finite Element Method (QALE-FEM) for numerically simulating wave-body interaction problems based on the fully nonlinear potential theory. The boundary value problem in this model is solved by a finite element method (FEM). The main difference between this method …

    city-london Download PDF for Numerical simulation of nonlinear response of moored floating structures to steep waves (opens in a new tab)

  4. Dynamic Phasor Finite Element Modeling of A Doubly-Fed Induction Generator

    … computational burden of more accurate modeling methods, at the expense of less accuracy. The Finite Element Method (FEM) is well-known for high accuracy in modeling the electromagnetic behavior of electric generators including topology complexities and performance nonlinearities. However, this …

    calgary Repository record for Dynamic Phasor Finite Element Modeling of A Doubly-Fed Induction Generator (opens in a new tab)

  5. Primal dual weak Galerkin finite element method for Maxwells' equations

    … the Primal-Dual Weak Galerkin Finite Element Method (PDWG-FEM). The resulting Euler Lagrange Equation offers a symmetric finite element scheme involving primal and dual variables. The error estimate of the optimal order is estimated for the corresponding numerical solution in discrete Sobolev …

    ttu Repository record for Primal dual weak Galerkin finite element method for Maxwells' equations (opens in a new tab)

  6. Hybrid explicit-implicit FDTD-FEM time-domain solver for electromagnetic problems

    The Finite-Difference Time-Domain (FDTD) method and Finite-Element (FEM) method are numerical techniques used for solving Maxwell's electromagnetic equations. FDTD-FEM hybrid methods opt for combining the advantages of both FDTD and FEM. In this dissertation, signal processing techniques were used …

    njit Repository record for Hybrid explicit-implicit FDTD-FEM time-domain solver for electromagnetic problems (opens in a new tab)

  7. Accurate Treatments of Electronic Correlation: Phase Transitions in an Idealized One-Dimensional Ferroelectric and Modelling Experimental Quantum Dots

    … large set of commonly used electronic structure methods including MSFT, KLI, LSDA, and CCSD, and in the second we scrutinize whether SDW states truly exist as predicted by LSDA. In conjunction with the Computational Electronics Group at the Beckman Institute, we have performed QMC calculations on …

    uiuc Repository record for Accurate Treatments of Electronic Correlation: Phase Transitions in an Idealized One-Dimensional Ferroelectric and Modelling Experimental Quantum Dots (opens in a new tab)

  8. Muffler characterization with implementation of the finite element method and experimental techniques

    … A full parametric study was conducted using the FEM method for typical muffler elements which was also correlated to experimental results. This thesis lays out the overall ground work on how to accurately predict sound pressure levels in the free field for an exhaust system with the engine …

    mtu Repository record for Muffler characterization with implementation of the finite element method and experimental techniques (opens in a new tab)

  9. Far-field predictions from near-field measurements using the three dimensional finite element and boundary integral methods.

    … into far-field solutions. The finite element method (FEM), and an integral formulation, solution to the scattering problem, are used separately to solve the open boundary wave propagation problem in three dimensions. The near-field of a known source is sampled over a mesh of points and used as …

    ottawa-retro Repository record for Far-field predictions from near-field measurements using the three dimensional finite element and boundary integral methods. (opens in a new tab)

  10. Solution of open region electromagnetic scattering problems on hypercube multiprocessors

    … space. Initially, algorithms based on the method of moments are investigated for coarse-grained MIMD hypercubes as well as fine-grained MIMD and SIMD hypercubes. It is shown that by exploiting the architecture of each hypercube, supercomputer performance can be obtained using the JPL Mark …

    uiuc Repository record for Solution of open region electromagnetic scattering problems on hypercube multiprocessors (opens in a new tab)

  11. Multimodal modelling of the human brain

    … contrasts. Finally, a finite element modelling (FEM) approach was developed for solving the electroencephalography (EEG) forward problem. Electrical conductivity tensors were estimated from DWI in order to represent the heterogeneous conductivity profile of the white matter. When tested against …

    liege Repository record for Multimodal modelling of the human brain (opens in a new tab) Download PDF for Multimodal modelling of the human brain (opens in a new tab)

  12. Material Characterization and Numerical Techniques for Accurate Prediction of Snow-Tire Interactions

    … typically evaluated using standardized methods such as ASTM F1805-20. However, physical testing presents substantial limitations, including limited access to winter proving grounds, difficulties in maintaining consistent test conditions and high prototyping costs. This dissertation …

    vt Repository record for Material Characterization and Numerical Techniques for Accurate Prediction of Snow-Tire Interactions (opens in a new tab)

  13. High-Order Numerical Methods in Lake Modelling

    … context of water quality management, improved methods are necessary to better capture the wide array of dynamically important physical processes, spanning length scales from ~ 10 km (basin-scale oscillations) - 1 m (short internal waves). In this thesis, high-order numerical methods are …

    waterloo Repository record for High-Order Numerical Methods in Lake Modelling (opens in a new tab)

  14. Micro-macro Modeling of Advanced Materials by Hybrid Finite Element Method

    … problem and develops a new convenient numerical method and framework for users to perform such analyses of composites. In this thesis, the hybrid fundamental solution based finite element method (HFS-FEM) is developed and applied to model composite materials across microscale and macroscale and …

    anu Repository record for Micro-macro Modeling of Advanced Materials by Hybrid Finite Element Method (opens in a new tab)

  15. Modeling of Ultrasonic and Terahertz Radiations in Defective Tiles for Condition Monitoring of Thermal Protection Systems

    … this research. Shortcomings and limitations of FEM method in modeling 3D problems especially at high-frequencies has been discussed and a newly developed semi-analytical technique called Distributed Point Source Method (DPSM) has been used for this purpose.A FORTRAN code called DPSM3D has been …

    arizona-thes Repository record for Modeling of Ultrasonic and Terahertz Radiations in Defective Tiles for Condition Monitoring of Thermal Protection Systems (opens in a new tab)

  16. Developing Highly Accurate And Stable Open-region Electromagnetic Simulations

    … theory of Concurrent Complementary Operators Method (C-COM) in both transient and frequency-domain numerical simulations is investigated. The C-COM is based on the basic premise of primary reflection cancellation. The C-COM applications to numerically derived ABCs in finite difference …

    maryland Repository record for Developing Highly Accurate And Stable Open-region Electromagnetic Simulations (opens in a new tab)

  17. Numerical Simulation of Sliding Friction and Wet Traction Force on a Smooth Tire Sliding on a Random Rough Pavement

    … on the evaluation of two specific prediction methods that can be used to predict friction on a smooth tire sliding on a rough moist pavement by comparing the corresponding predictions with the results of field experiments. A 3-dimensional finite element model (FEM) formulated in ANSYS software …

    usf Repository record for Numerical Simulation of Sliding Friction and Wet Traction Force on a Smooth Tire Sliding on a Random Rough Pavement (opens in a new tab)

  18. Pore-scale Modeling of Fluid Flow and Particle Transport in Multi-scale Porous Media

    … a new higher-order, locally mass conserving FEM method. Stokes equation and Darcy equation are solved for macroporosity and microporosity, respectively. Thereafter, a generic Eulerian-Lagrangian approach is developed to simulate solute (massless particles) transport within a FEM velocity …

    lsu-thes Repository record for Pore-scale Modeling of Fluid Flow and Particle Transport in Multi-scale Porous Media (opens in a new tab)

Page 1 of 2