Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 60 for “"FEM modeling"”.
-
Preliminary FEM modeling of orthogonal turning
Thesis (M.S.)--Michigan State University. Department of Mechanical Engineering, 2002
-
FEM modeling of a concrete arch bridge.
A Physics doctoral project seeks to reduce the uncertainty of inaccurate visual bridge inspections by producing a remote sensor program to determine and monitor the changes in health of a specified bridge. The Eastern Parkway Bridge was determined as the first bridge to test. As part of this …
-
Electric Machine 3D FEM Modeling and Design Impact on Torque Ripple
… between Ansys Maxwell 2D and ElmerFEM 2D demonstrates that back-EMF and flux linkage were in good agreement, confirming the reliability of the Elmer setup for the Prius motor. Finally, the ElmerFEM 3D results showed good agreement with the 2D results in terms of back-EMF harmonic …
-
Three-Dimensional FEM Modeling of Geothermal Reservoir Stimulation Using Stochastic Fracture Networks and Continuum Damage Mechanics
… work, three-dimensional finite element methods (FEM) are developed and applied to simulate the response of unconventional reservoirs to fluid injection. The FEM model is assisted with continuum damage mechanics and stochastic fracture network model, which simulates the intact rock failure process …
-
Development of solid propellant microthrusters
… degree of maneuverability and integration. CFD modeling is performed to simulate the microthruster performance. FEM modeling is carried out to simulate the ignition process. Single microthruster and microthruster arrays are successfully fabricated using MEMS and LTCC technologies. The …
-
Numerical modeling on scratch and mar induced damages in polymeric systems
… were investigated in this dissertation via FEM modeling. The experimental tests were carried out according to ASTM/ISO standard to validate the FEM model. Three amorphous polymers PMMA, PC, and PS were employed to study the barrel mar behavior. By comparison to experimental results, the …
-
The Development of Asphalt Mix Creep Parameters and Finite Element Modeling of Asphalt Rutting
… rutting prediction. The finite element method (FEM) allows for analysis of nonlinear viscoplastic behaviour of asphalt mixes. This research determines the critical characteristics of asphalt mixes which control rutting potential and investigates the methods of laboratory testing which can be …
-
Measurements and modeling of the effects of an orthogonal bias field on properties of isotropic magnetic materials
… model problems involved in this study. 2D linear FEM modeling was used to evaluate the internal orthogonal field along a toroid axis and flux line distribution of magnetic devices, while 3D nonlinear FEM modeling was successfully used to study the evolution of the saturation regions of variable …
-
Study on permanent magnet transverse flux machine
… that was built with 3D Finite Element Method (FEM) modeling of PMTF generator proves that the generator that was built on the basis of topology of 2010 has several significant disadvantages among which the greatest impact have high leakage flux losses. Applying FEM modeling, various steps to …
-
How anatomical details affect noninvasive brain stimulation in computational models
… problems, we employ the power of computational modeling, specifically finite element method (FEM) modeling. FEM modeling allows us to build head models and simulate TMS and TES induced electric fields. However, there are many factors that go into building accurate models and it is not always …
-
Modeling and control of flexible link robots
In this thesis, dynamic modeling and controller design of rotational/translational flexible link robots are investigated. For the simulations and controller design, Assumed Modes Method (AMM) and Finite Element Method (FEM) are reviewed for completeness. For the single link model, an essential …
-
The Effect of Laser Shock Peening on Dislocation Morphology and Microstructural Evolution of AA5083-H116
… microscopy (TEM), and finite element method (FEM) modeling were utilized to study the effect of LSP on AA5083-H116 microstructural evolution, dislocation morphology, and stress-strain distribution. FEM results showed LSP induces plastic compressive deformation near the surface. TEM …
-
Surface Acoustic Wave Characterization and Interdigitated Transducer Optimization for Studying Stress-Enhanced Phenomena
… revealing stress values on the order of 108 Pa. FEM software models the electrical and mechanical behaviors of interdigitated transducer structures, and the simulated displacements are confirmed with atomic force microscopy at room temperatures. FEM modeling predicts device performance for …
-
Flanking transmission over CLT joints
… the model with the finite element method (FEM) and comparing it with the measurement data on-site. Due to the special laminated structure and the orthotropic material properties of cross-laminated timber, correct modeling is challenging. A mode-shapes study of a plain CLT panel was …
-
FABRICATION AND CHARACTERIZATION OF ADVANCED ALUMINUM ALLOYS WITH LIQUID METAL PRINTING TECHNIQUES
… is conducted using finite element method (FEM) modeling through ANSYS.
-
Load Transfer Systems in Jointed Concrete Pavements
… the laboratory tests was compared to that of FEM modeling built within the ANSYS interface. The models developed incorporated realistic dowel-concrete bond-slip interfaces and subgrade support conditions. Analysis between both the experimental and FEM data helps to establish correlations that …
-
Electrochemical imaging of quantal exocytosis in single cells
… compared with the simulation data obtained from FEM modeling and the locations of release sites were identified. It was observed only sites of quantal releases with relatively high amount of charge (3.59+0.58 pC) can be identified. In order to expand the area on the cell in which the …
Page 1 of 3