Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"FEOL"”.
-
Optimization of Sputtered Hafnium Zirconium Oxide Ferroelectrics for Memory Applications
… (FE) HfO2 in the front-end-of-line (FEOL) requires complicated steps and significant cost. Consequently, the back-end-of-line (BEOL) integration of FE HfO2 is technically preferred. However, this straightforward integration is accompanied by a trade-off, which is the limited thermal …
-
Block copolymer self-assembly based device structures
… device features were used in front end of line (FEoL) fabrication of active device components in integrated circuits (IC). The potential use of BCP templates were further extended to metal and metal-oxide nanowire fabrication. These nanowires were further investigated in real-time applications as …
-
Comprehensive variation-aware aging simulator for logic timing and SRAM stability
… effect of a variety of front-end-of-line (FEOL) wearout mechanisms, while including both the manufacturing process variability and the real-time uncertainties in workload and ambient conditions like operating temperature and IR drops. Overall, the proposed framework presents the correlation …
-
Effects of moisture on the breakdown strength and lifetime of low permittivity dielectric for nanometer scale interconnects
… are now required at both the front-end-of-line (FEoL) and back-end-of-line (BEoL) of the device because simple dimensional scaling with standard materials has come with performance costs that negate dimensional scaling performance improvements. At the FEoL, high-[kappa]/metal gate processes are …
-
Oxidative Removal of Implanted Photoresists and Barrier Metals in Semiconductor Processing
… removal of materials in the Front-End-Of-Line (FEOL) and Chemical Mechanical Planarization (CMP) processes during IC fabrication. In the first part of this study, stripping of photoresists exposed to high dose of ions (1E16 As/cm²) was investigated in activated hydrogen peroxide systems. …
-
Reliability and Data Analysis of Wearout Mechanisms for Circuits
… time-dependent dielectric breakdown (FEOL TDDB). The separation of wearout mechanisms for circuits will be investigated, and the identification of failure modes for the failure samples will be analyzed. SRAMs and ring oscillators will be used to study the failure modes. The systematic …
-
Wettability of Silicon, Silicon Dioxide, and Organosilicate Glass
… to better select cleans for front end of line (FEOL) and back end of line (BEOL) cleaning processes. These principles can also be used to help determine processes that best repel water from a semiconductor device. It is known that the value of the dielectric constant in an insulator increases …
-
Semiconducting amorphous gallium oxide thin film transistors
… integration with low-voltage front-end-of-line (FEOL) transistors, facilitating energy efficient and compact systems. Amorphous gallium oxide (a-GaOx) emerges as a promising channel material for these TFTs due to its wide bandgap (~4.9 eV) and low deposition temperature, critical for BEOL …
-
Design and Reliability of mm-Wave Circuits In Silicon-Germanium
… the limitations of both Front End of the Line (FEOL: active devices) and Back End of the Line (BEOL: metal stack-up) in a commercial SiGe BiCMOS processes. The resulting performances utilize novel design techniques that allow them to be competitive with existing state-of-the-art designs across …
-
Radiation robustness of XOR and majority voter circuits at finFET technology under variability
… Back-End-Of-Line (BEOL) and Front-End-Of-Line (FEOL) layers of an advanced technology node.
-
Vertical III-V nanowire tunnel field-effect transistors : a circuit perspective
… operation, individual devices were connected via FEOL and are biased at 300 mV supply voltage, with an input frequency of 200 kHz. To explore current-mode based design principle, a current conveyor circuit was implemented, which exhibits large-signal voltage gain of 0.89 mV/mV, a current gain of 1 …
-
Characterization of self-heating effects and assessment of its impact on reliability in finfet technology
… operating (AC) conditions. Front-end-of-line (FEOL) reliability mechanisms, such as hot carrier injection (HCI) and non-uniform time dependent dielectric breakdown (TDDB), are studied to show that self-heating effects can impact measurement results and recommendations are given on how to …
-
Practical Techniques for Improving Performance and Evaluating Security on Circuit Designs
… The untrusted foundry has front-end-of-line (FEOL) layout and the original circuit netlist and attempts to identify critical components on the layout for Trojan insertion. Although defense methods for this scenario have been developed, the corresponding attack technique is not well explored. …
-
Use of a Quartz Crystal Microbalance with Dissipation Monitoring to Study Adsorption Phenomena Relevant to Semiconductor Wet Processing
… in the context of front-end-of-line (FEOL) wet cleaning, specifically organic removal with a sulfuric acid/peroxide mixture (SPM). During SPM cleaning, high concentrations of sulfuric acid are used, and residual sulfate on the surface is generally removed by deionized (DI) water …
-
Exploration, Modeling, and Optimization of Advanced Interconnects: Solutions to Node Scaling Challenges
The objective of the proposed research is to explore novel interconnect options and to develop an accurate modeling/technology-design co-optimization flow to evaluate BEOL improvements at the advanced nodes. The modeling framework includes the BEOL impact on circuit performance (inter-cell …
-
Development of ferroelectric tunnel junction devices based on hafnia zirconia films for neuromorphic applications
This thesis focuses on the development of FTJ devices using a Hf0.5Zr0.5O2 (HZO) ferroelectric layer, demonstrating their compatibility with CMOS integration and their applicability in neuromorphic hardware. A bilayer structure comprising metal- ferroelectric-dielectric-metal layers with a ∼ 10 nm …