Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 36 for “"FFT analysis"”.

  1. Z-transform Analysis of Zero-Crossing Speech

    Two methods for Z-transform analysis of differentiated, infinite peak clipped speech were tested. First, a polynomial representation of the Z-transform was implemented and its sound recognition and speech compression capabilities tested. Second, a study was made of the characteristics of the …

    marquette Repository record for Z-transform Analysis of Zero-Crossing Speech (opens in a new tab)

  2. Thermal behavior of the STM tip under laser irradiation

    … domain were investigated. By employing the FFT analysis, the noise of the thermal behavior in the frequency domain was greatly reduced when compared to the time domain behavior, allowing for higher resolution expansions. With noise reduced, a thermal expansion of 1 nm, equating to a 0.03 K …

    iastate Repository record for Thermal behavior of the STM tip under laser irradiation (opens in a new tab)

  3. A Polynomial Chaos Approach for Stochastic Modeling of Dynamic Wheel-Rail Friction

    … account for uncertain parameters, a stochastic analysis using the polynomial chaos (poly-chaos) theory is performed using the CoF and wheel-rail dynamics models. The wheel-rail system at a right traction wheel is modeled as a mass-spring-damper system to simulate the basic wheel-rail dynamics …

    vt Repository record for A Polynomial Chaos Approach for Stochastic Modeling of Dynamic Wheel-Rail Friction (opens in a new tab)

  4. Computational Sensing and Closed-Loop Active Flow Control of Airfoil at Post-Stall Conditions

    … location and using a Fast Fourier Transform (FFT) analysis to obtain it. Single, double and triple synthetic jets are located at control ports which are placed at leading edge, middle and trailing edge of the airfoil upper surface, respectively. The effect of the locations and the operation …

    odu Repository record for Computational Sensing and Closed-Loop Active Flow Control of Airfoil at Post-Stall Conditions (opens in a new tab)

  5. FLOWS AND DYNAMICS OF GRANULAR MATERIALS

    … tracked, and further examined by power spectrum analysis. The preferred intrinsic modes are examined by the FFT analysis and the output is used to characterize the flows of granular materials. In bounded shear flow of granular materials, two types of standing density waves, namely layering and …

    nus Repository record for FLOWS AND DYNAMICS OF GRANULAR MATERIALS (opens in a new tab) Download file for FLOWS AND DYNAMICS OF GRANULAR MATERIALS (opens in a new tab)

  6. Determination of the Mechanical Properties of Electrospun Gelatin Based on Polymer Concentration and Fiber Alignment

    … of mandrel rotation. Fast Fourier Transform (FFT) analysis was performed on these samples, to determine how fiber alignment is affected by starting polymer concentration and the rotational speed of the target mandrel. Mechanical tests were aiso performed on these samples. Results were analyzed …

    vcu Repository record for Determination of the Mechanical Properties of Electrospun Gelatin Based on Polymer Concentration and Fiber Alignment (opens in a new tab)

  7. Effect of propellant morphology on the acoustics of the BATES motor

    … chamber flow characteristics and by performing FFT analysis on the head-end pressure histories. The study is then expanded to include analysis of the 70 pound version of the BATES motor. The analysis of one of the propellant morphologies used in the study of the smaller motor and the white noise …

    uiuc Repository record for Effect of propellant morphology on the acoustics of the BATES motor (opens in a new tab)

  8. Mode modulation accelerometer

    An analysis to determine the mode loss in a heavily damped multimode optical fiber subjected to forced and controlled vibrations was performed. The results of the analysis concluded that an optical fiber could be used to sense acceleration. The experimental configuration was modeled as a heavily …

    ucf Repository record for Mode modulation accelerometer (opens in a new tab)

  9. Characterizing Noise and Harmonicity: The Structural Function of Contrasting Sonic Components in Electronic Composition

    … methods for quantifying noise content using FFT analysis procedures. A number of tests on instrumental and synthetic sound sources are described in order to demonstrate how the analysis system may react to certain sounds. The second part of this document consists of several analyses of whole …

    unt Repository record for Characterizing Noise and Harmonicity: The Structural Function of Contrasting Sonic Components in Electronic Composition (opens in a new tab)

  10. Experimental Investigation of the Physical Properties of IrmSnn (m = 1, 3 and n = 2, 4, 7)

    … Through fast Fourier transformation (FFT) analysis, several frequencies have been identified. A comparative analysis of the behaviors observed in these Irm­Snn single crystals will also be presented.

    lsu-thes Repository record for Experimental Investigation of the Physical Properties of IrmSnn (m = 1, 3 and n = 2, 4, 7) (opens in a new tab)

  11. On the use of wavelets as an alternative to Fourier analysis for transient dynamic data

    <p>Various dynamic data analysis and synthesis tools for one-dimensional time- domain signals are employed to determine the frequency content of a signal for mechanical analysis. When tied to the fundamental frequency of the various com- ponents comprising the machinery being evaluated, this …

    ut-knoxville Repository record for On the use of wavelets as an alternative to Fourier analysis for transient dynamic data (opens in a new tab)

  12. Computer interfacing and analysis of a sigma-delta analog-to-digital converter

    … was studied using statistical and Fourier analysis. In addition, a personal computer interface was developed that was quite reliable, yet reasonably priced and is practical for home use. Such a device was designed for use externally to the PC parallel port and built to allow data from the …

    ut-knoxville Repository record for Computer interfacing and analysis of a sigma-delta analog-to-digital converter (opens in a new tab)

  13. Adjustable Wheelchair Obstacle Simulator and Instrumentation for Assessing Wheelchair Suspension

    … and their intensities with either a PSD or FFT analysis. The minimum observable effect of change between two test conditions ranged from 6.0% for peak acceleration analysis when using six tests and a light dummy; to 41.0% for PSD analysis when using three tests and a heavy dummy. This …

    queens Repository record for Adjustable Wheelchair Obstacle Simulator and Instrumentation for Assessing Wheelchair Suspension (opens in a new tab)

  14. Cavitation and Heat Transfer Over Micro Pin Fins

    … the micro pillar. Fast Fourier transformation (FFT) analysis of the cavity image intensity revealed transverse cavity shedding frequencies in various geometries and provided an estimation for vortex shedding frequencies. Experimental and numerical heat transfer studies over array of pin fins …

    ucf Repository record for Cavitation and Heat Transfer Over Micro Pin Fins (opens in a new tab)

  15. Evaluation of the accuracy of digital workflow for implant-supported full arch fixed dental prostheses using micro-CT (novel research)

    … on the printed model and performing a Micro-CT analysis. Micro-CT was additionally performed after placing each titanium framework on the model under two conditions: single screw test (SST-CT) and final fit test (FFT-CT). These measurements were compared to the baseline. Passivity was evaluated …

    ubc Repository record for Evaluation of the accuracy of digital workflow for implant-supported full arch fixed dental prostheses using micro-CT (novel research) (opens in a new tab) Download PDF for Evaluation of the accuracy of digital workflow for implant-supported full arch fixed dental prostheses using micro-CT (novel research) (opens in a new tab)

  16. Frequency-Based Rapid Structural Damage Detection Using Embedded Edge Computing on Resource-Constrained Devices

    … demonstrates Fast-Fourier Transform (FFT) analysis for identifying structural damage in printed circuit boards (PCBs) exposed to mechanical shock. This study makes use of embedded sensors to build the foundations of edge-computing for self-diagnosing electronics, also paving the way …

    south-carolina Repository record for Frequency-Based Rapid Structural Damage Detection Using Embedded Edge Computing on Resource-Constrained Devices (opens in a new tab)

  17. Vibration-Based Health Monitoring of Multiple-Stage Gear Train and Differential Planetary Transmission Involving Teeth Damage and Backlash Nonlinearity

    … and loading conditions. Fast Fourier Transform (FFT) analysis shows the appearance of side band modulations and harmonics of the gear mesh frequency. A joint time-frequency analysis (JTFA) during start-up reveals the unique vibration patterns for fixed axis gear train and differential planetary …

    calpoly Repository record for Vibration-Based Health Monitoring of Multiple-Stage Gear Train and Differential Planetary Transmission Involving Teeth Damage and Backlash Nonlinearity (opens in a new tab)

  18. Sonic Effects of Bow Force Vector Differentials on Bowed Stringed Instruments

    … by 1) an objective correlation study in which FFT graph overlays and roll angle data are gathered and analyzed from an audio/video recording of four musicians using both Techniques A and B, recorded on a set of 8 test pitches along with a synchronized recording of the bow’s roll angles, and 2) …

    ttu Repository record for Sonic Effects of Bow Force Vector Differentials on Bowed Stringed Instruments (opens in a new tab)

Page 1 of 2