Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"FIBER TEXTURE"”.

  1. Texture evolution of niobium, aluminum, and titanium in Ti-Al-Nb composites processed by accumulative roll bonding

    … to the composites. The microstructure and texture evolution of the elemental Nb, Al and Ti phase was studied by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and electron backscattered diffraction (EBSD). Nanoindentation was performed as …

    alabama Repository record for Texture evolution of niobium, aluminum, and titanium in Ti-Al-Nb composites processed by accumulative roll bonding (opens in a new tab)

  2. INVESTIGATION OF THE STRUCTURAL PROPERTIES OF HAFNIUM ZIRCONIUM OXIDE THIN FILMS

    … samples contained only the monoclinic phase with fiber texture along the [1-1-1]/[11-1] axis, with the SiO2-based samples exhibiting stronger preferred orientation. Two TiN and SiO2-based samples contained the tetragonal phase with fiber texture along the [011] axis. Complimentary transmission …

    sask Repository record for INVESTIGATION OF THE STRUCTURAL PROPERTIES OF HAFNIUM ZIRCONIUM OXIDE THIN FILMS (opens in a new tab)

  3. Tilted Columnar Thin Film Coatings With Anisotropic Light Scattering Properties for Solar Energy Applications

    … anisotropic scattering. The thin films texture changes from fiber texture to tilted fiber texture by increasing the vapor incidence angle. At very large deposition angles, biaxial texture forms. The morphology of the thin films deposited under extreme shadowing condition and at high …

    queens Repository record for Tilted Columnar Thin Film Coatings With Anisotropic Light Scattering Properties for Solar Energy Applications (opens in a new tab)

  4. Identification of deformation mechanisms during bi-axial straining of superplastic AA5083 material

    … Imaging Microscopy was utilized to determine texture development, grain size and grain-to-grain misorientation angle distributions for locations located along a line of latitude of the dome samples. The goal was to identify the location of the transition from grain boundary sliding to …

    nps Repository record for Identification of deformation mechanisms during bi-axial straining of superplastic AA5083 material (opens in a new tab)

  5. Tantalum clustering in the A1 to L1o iron-platinum-tantalum chemical ordering phase transformation

    … Ta resulted in the change in the {111} to {200} fiber texture for these films. This has been explained in terms of the competition between surface energy and strain energy. The Fe₅₂Pt₄₈ and Fe₅₂․₃Pt₄₆․₃Ta₁․₄ films ordered into L1₀ at 550°C but the Fe₅₂Pt₄₀․₇Ta₇․₃ did not. Upon annealing at 750°C …

    alabama Repository record for Tantalum clustering in the A1 to L1o iron-platinum-tantalum chemical ordering phase transformation (opens in a new tab)

  6. Stucture and thermomechanical behavior of nitipt shape memory alloy wires

    … the alloy includes grain size determination and texture analysis while the thermo-mechanical properties are explored using tensile testing. Variation in heat treatment is used as a vehicle to modify microstructure. The results are compared to experiments on Ni-rich NiTi alloy wires (Ti-51.0 at% …

    gatech Repository record for Stucture and thermomechanical behavior of nitipt shape memory alloy wires (opens in a new tab)

  7. Microstructure-strength relationship of a deformation processed aluminum-titanium composite

    … from deformation processing and have shown that texture development in the matrix and fiber phases has a significant influence on the processing and properties of the composite material. The work done on HCP composites indicates that axisymmetrically deformed HCP metals in DMMC's develop a (1010) …

    iastate Repository record for Microstructure-strength relationship of a deformation processed aluminum-titanium composite (opens in a new tab)

  8. Mechanical deformation of polycrystalline silicon for solar cell production

    … material has been found to have a strong < 110 > fiber texture as revealed by EBSD. Recrystallization occurs during pre-annealing at 1400 °C for 30minutes. Approximately 90 % of the material recrystallizes with a complete disappearance of the fiber texture. Stacking faults have been mainly …

    oxford Repository record for Mechanical deformation of polycrystalline silicon for solar cell production (opens in a new tab)

  9. Characteristics of dynamic abnormal grain growth in commercial-purity molybdenum

    … generally described as derivative from a <101> fiber texture. DAGG was found to prefer growth on the surface of the specimen rather than the interior. The growth of dynamic abnormal grains, which initiated and grew during plastic straining, generally ceased when the application of plastic strain …

    texas Repository record for Characteristics of dynamic abnormal grain growth in commercial-purity molybdenum (opens in a new tab)

  10. DEFECT-MEDIATED TRANSFORMATIONS IN THIN METAL FILMS

    … in tantalum thin films, and the (111)-to-(100) texture transformation in face-centered cubic metal thin films. Both are revealed to rely on specific defect structures. To understand the β-to-α phase transformation in Ta films, we first investigated the nature of the metastable β phase of …

    cornell Repository record for DEFECT-MEDIATED TRANSFORMATIONS IN THIN METAL FILMS (opens in a new tab)

  11. Effects of heat treatment on structure-property relationships of additively manufactured Inconel 718, The

    … grain growth, and strong crystallographic fiber texture with respect to the build direction. Since these microstructures differ from their C&W forms, their reactions to SHTs should be inherently different as well. Understanding these differences is vitally important to producing …

    colo-mines Repository record for Effects of heat treatment on structure-property relationships of additively manufactured Inconel 718, The (opens in a new tab)

  12. Magnetic and Structural Properties of Ni-Mn-Ga Films Produced Via Physical Vapor Tri-Deposition

    … the 14M modulated martensite structure, a fiber texture, an average grain size of approximately 100 nm. The martensitic start and finish temperatures, measured with multi-beam optical sensor wafer curvature deflectometry, were 122 °C and 81 °C respectively, indicating stress-induced …

    boise Repository record for Magnetic and Structural Properties of Ni-Mn-Ga Films Produced Via Physical Vapor Tri-Deposition (opens in a new tab)

  13. Microstructural evolution of sputtered phase segregated metal composite thin films

    … the first comparative study of crystallographic texture development in three different types of metal thin film composites: fully miscible (Au-Ag), slightly immiscible (Cu-Ag) and immiscible (Au-SiO 2). Texture development refers to the distribution of orientations of crystallites in …

    unh-thes Repository record for Microstructural evolution of sputtered phase segregated metal composite thin films (opens in a new tab)

  14. Influence of microstructural length scale on deformation behavior of magnesium alloys

    … magnesium alloys. FSP introduced strong basal fiber texture and processing parameter dependent grain/precipitate size and distribution. Grain refinement promoted non-basal dislocation activation at room temperature. The strength of the alloy increased as a consequence of grain refinement …

    must-thes Repository record for Influence of microstructural length scale on deformation behavior of magnesium alloys (opens in a new tab)

  15. Multi-Scale Assessment of Geotextile-Geomembrane Interaction

    … have focused on the large-scale interaction of fiber-texture interfaces while the micromechanical behavior of the internal geotextile structure has received limited attention. Characterizing the variation in the arrangement and distribution of filaments/voids is essential to understanding the …

    gatech Repository record for Multi-Scale Assessment of Geotextile-Geomembrane Interaction (opens in a new tab)

  16. Microstructure and strength of a deformation processed Al-20%Sn metal-metal composite

    … and ribbon cross section aspect ratio.;The fiber texture was determined by orientation imaging microscopy to be <100> for Al and <001> for Sn. The 290 MPa ultimate tensile strength of the composite was greater than the rule-of-mixtures prediction. Comparisons are made with Al-Nb, Al-Ti and …

    iastate Repository record for Microstructure and strength of a deformation processed Al-20%Sn metal-metal composite (opens in a new tab)

  17. Dynamic abnormal grain growth of selected refractory metals

    … stress, strain rate, initial microstructure and texture on tensile test data and the resulting microstructures are examined. The microstructures of the Ta materials are analyzed using electron backscatter diffraction (EBSD) data to quantify the orientation, deformation, grain boundary character, …

    texas Repository record for Dynamic abnormal grain growth of selected refractory metals (opens in a new tab)

  18. THE POWER OF CONSUMER DESIRE : THE TRADE AND CONSUMPTION OF TEXTILES AND CLOTHING IN FRENCH AND BRITISH NORTH AMERICA, 1713-1760

    … The materiality of textiles—their weave, fiber, texture, color, pattern—was instrumental in how consumers expressed these cultural and social values.

    jhu Repository record for THE POWER OF CONSUMER DESIRE : THE TRADE AND CONSUMPTION OF TEXTILES AND CLOTHING IN FRENCH AND BRITISH NORTH AMERICA, 1713-1760 (opens in a new tab)

  19. X-ray diffraction from point-like imperfection

    … orientation function for samples containing a fiber texture. A slit correction is included and the final results from this simplified approach are compared with the pole figure measured by direct x-scanning. Knowing the orientation function allows one to correct the integrated intensities to …

    vt Repository record for X-ray diffraction from point-like imperfection (opens in a new tab)

  20. Non Destructive Evaluation And Characterization Of Continuous And Long Fiber Reinforced Thermoplastic Composites

    … properties of thermoplastic composites, such as fiber length, fiber volume fraction and fiber orientation to name a few. Fiber orientation plays a critical role in determining the mechanical and thermal properties of composites, and understanding the fiber orientation will lead to improved part …

    uab Repository record for Non Destructive Evaluation And Characterization Of Continuous And Long Fiber Reinforced Thermoplastic Composites (opens in a new tab)

Page 1 of 2