Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"FLiBe"”.
-
Development of Low-Cost Small-Batch FLiBe Filtration, and a Comparison of Uranium Tetrafluoride and Ionic Oxygen Oxidation in FLiBe
… fluoride salt cleaning was investigated in FLiBe (LiF-BeF2), focusing on electrochemical cleaning and filtration. FLiBe filtration was demonstrated using both pressurized and open filtration systems. Copper and 400 Monel meshes were effective and reusable. Wetting appears to be the primary …
-
Feasibility Study of a Natural Uranium Neutron Spallation Target using FLiBe as a Coolant
… Fluoride-Beryllium Fluoride (LiF-BeF2) or FLiBe as a coolant with a natural uranium neutron spallation source applied to an accelerator driven sub-critical molten salt reactor. The study utilized two different software tools, MCNPX 2.6 and FLUENT 12.1. MCNPX was used to determine the …
-
Advancements in Molten Salt Physical Property Measurement: Archimedean Density, Couette Viscometer, and FLiBe-Te Solution Penetration Analysis
… of this research, the ADSA method was applied to FLiBe, a critical fluoride salt in molten salt nuclear reactor design, and tellurium-bearing FLiBe to examine its interaction with boron nitride, a key solid porous material used in reactor vessel structures. Surface tension and contact angle …
-
DESIGN AND OPTIMIZATION OF A FAST-NEUTRON, EXTERNALLY DRIVEN THORIUM-LITHIUM-BERYLLIUM FLUORIDE MOLTEN SALT SUBCRITICAL ASSEMBLY
An externally driven subcritical molten FLiBe-Thorium LiF-BeF2-ThF4 (52.8-27.2-20 mol%) salt assembly is being constructed at Texas A&M Nuclear Engineering and Science Center (NESC). The experiment is called the Thorium Engineering and Science Assembly (ThESA). The objective of ThESA was to be a …
-
Cesium Voltilization in LiF-BeF2: Predicting Release in the Event of FHR Fuel Failure
… to evaluate cesium volatilization from LiF-BeF2 (Flibe) salt with ab initio molecular dynamics studies used as corroborating data to better understand cesium behavior. Using mixtures of Flibe with 2 mol% CsF, it was found that cesium was stable within the salt melt at temperatures between …
-
Initiating Event Analysis of a Lithium Fluoride Thorium Reactor
… thesis will study the LFTR design proposed by Flibe Energy. An October 2015 Electric Power Research Institute report on the Flibe Energy LFTR asked “what-if?” questions of subject matter experts and compiled a list of key hazards with the most significant consequences to the safety or integrity …
-
Simplified core physics and fuel cycle cost model for preliminary evaluation of LSCR fueling options
… standpoint. The lithium enrichment of the FLiBe coolant was also investigated. The main focus was to understand the practical limitations associated with the Li-7 enrichment and whether it could be used for beneficial purposes. The main idea was to determine whether a lower-than-equilibrium …
-
Integrated modeling to design a digital twin of the Massachusetts Institute of Technology molten salt irradiation flow loop
… cross sections, neutron activation, decay of FLiBe molten salt, and simulates the detector response of a Reverse Electrode Germanium Detector. The findings suggest that gamma detectors positioned at different locations on the flow loop can enable operators to determine flow characteristics and …
-
Design of an off-gas holdup system model for a molten salt reactor
… reactor using a Fluorine-Lithium-Beryllium (FLiBe) salt. The finalized model features a spatial and temporal prediction of nuclide travel through long sections of activated charcoal-filled pipe, referred to as beds, along with a dose estimate of the effluent leaving the beds and facility. The …
-
Fail-safe source-driven fission and fusion-fission hybrid reactor configurations
… surrounded by a reflector. A 232Th and 233U FLiBe molten salt wasused as the fuel in the core. The reactor is made criticalwith the addition of a thin region of FLiBe salt with a spike of fissile material (233U). With a kin the core and total system effkof unity, the flux profile for the …
-
Computational Insights into the Corrosion Behavior of NbTaMoW and NbTaMoWV High-Entropy Alloys in Molten Fluoride Salts
… and (100)-NbTaMoWV surfaces in pure and hydrated FLiBe salt via density functional theory and ab initio molecular dynamics simulations. Electronic structure analyses, including density of states and crystal orbital Hamilton population, provide insight into the interfacial bonding and charge …
-
Modeling and Sensitivity Studies for Radioisotope Signatures of Molten Salt Reactors (MSRs)
… and decay calculations using ORIGEN with a FLiBe fuel salt. MSR emissions from certain reactor applications may significantly overlap with signals produced in a HEU event and changing irradiation time, using hold tanks, and changing off-gas removal rates can significantly shift the …
-
On-line refueling for the advanced high temperature reactor
… as moderator, TRISO particles as fuel and FLiBe as coolant. The AHTR reference design is based on a traditional batch refueling approach, which requires to shut down the reactor and replace/reshuffle a certain amount of fuel assemblies in the core at a specific frequency. Several options …
-
Impact of thorium based molten salt reactor on the closure of the nuclear fuel cycle
… a mixed carrier salt of lithium and beryllium (FLiBe). The objective of this research was to complete feasibility studies of a small commercial thermal LFTR. The focus was on neutronic calculations in order to prescribe core design parameter such as core size, fuel block pitch (p), fuel channel …
-
Integration of High-Fidelity CFD Simulations and Reduced-Order Modeling Techniques for Optimizing Flow and Heat Transfer in Randomly Packed Beds
… and pressure drop in packed beds cooled by FLiBe, a high Prandtl number molten salt, were studied under varying D/dp ratios. Simulations revealed the critical role of wall interference, demonstrating that lower D/dp ratios significantly impact flow uniformity, Nusselt number distribution, …
-
Structural Characteristics and Thermophysical Properties of Molten Salts From Ab Initio Molecular Dynamics Simulations
… is shown to be volatile or retainable in FLiBe at 500, 650, and 800 ËšC based on complexation and validated experimentally. It is shown that the chemical potential of an anion varies between melts as influenced by the different cations present in each melt. Hence, attempts to use a common …
-
Synthesis and Leachate Analysis of Dry Synthesized Substituted Fluorapatite Nuclear Surrogate Waste Forms for Molten Salt Reactors
… A lithium fluoride and beryllium fluoride salt (FLiBe) was combined with tricalcium phosphate (TCP) and sintered to produce substituted fluorapatites. Upon verification of apatite formation, additional fission product substituted apatites were fabricated using the same conversion process to …
-
Modeling of Fluoride Molten Salt Reactor Depletion in SCALE
… MSRs. This thesis focuses on graphite-moderated, FLiBe-fueled MSRs. It aims to determine the impacts and trade-offs for a given SCALE MSR depletion model between the user-defined simulation parameters, accuracy of the depletion simulation results and the computational resources. Accuracy of the …
-
Refinement and testing of CTF for annular flow regime and incorporation of fluid properties
… only supports fluid properties for water and FLiBe salts. By adding R-134a fluid properties the testing and validation range of CTF is broadened for different experiments performed using R-134a fluids. CHF experiments are modeled in CTF and results are compared with experimental data. For …
-
Development of Nuclear Safeguards Approaches for a Molten Salt Reactor Design
… with molten lithium and beryllium fluoride (FLiBe) at a temperature of 900 K. The fuel-salt channels were surrounded by depleted UF4 blanket-salt channels. The fuel-salt and blanket-salt both had the same density (2.892 g/cm3). This proposed reactor model was developed using Monte Carlo …
Page 1 of 2