Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"FORM DRAG"”.
-
Influence of Attachment Line Flow on Form Drag
… shown that there might be a small but worthwhile form drag reduction through attachment line control, up to about 0:4
-
Using bottom pressure to quantify tidal form drag on a sloping headland
… pressure is used to quantify and understand form drag induced by tidal currents as they flow over and around Three Tree Point (TTP), a sloping headland in Puget Sound, WA that is typical of topography found in high latitude, coastal regions. By dividing the bottom pressure field into parts …
-
Observations of Hydraulic Roughness and Form Drag in the Wake of a Deep Ice Keel in the Arctic Ocean
… understanding of how keels affect turbulent drag and heat fluxes in the upper ocean. Results indicate that keels generate significant turbulence and mixing in the upper ocean, even during benign weather conditions in which there is little surface forcing. Keels increase the kinetic energy of …
-
Numerical simulations on patterns of alluviation in mixed bedrock-alluvial channels
… roughness due to sediment transport, and form drag. The model successfully replicates observations of bar development and migration from a fully alluvial flume experiment, and it models persistent sediment patches observed in a mixed bedrock-alluvial flume experiment. Numerical experiments …
-
Metal foam regenerators; heat transfer and pressure drop in porous metals
… were used to measure the permeability and form drag of the samples. The results showed that the cubic velocity equation had a better prediction of the permeability and form drag. The Small samples had the lowest permeability and highest form drag coefficient for metal foams. The wire mesh …
-
INFLUENCE OF STRUCTURAL AND CHEMICAL ASYMMETRY OF NANOSTRUCTURES ON THE KINETICS OF WETTING
… the nanostructures are sufficiently rough, a form of wetting different from Wenzel and Cassie-Baxter states will arise. This form of wetting is commonly known as hemiwicking or 2D wicking, and involves a film of liquid wicking from the base of the droplet into the space between the …
-
Numerical simulation studies of mass transfer under steady and unsteady fluid flow in two- and three-dimensional spacer-filled channels
… Time averaging and Fourier analysis were performed to gain insight into the dynamics of the different flow regimes encountered, ranging from steady flow to vortex shedding behind the spacer filaments. The relationships between 3D flow effects, vortical flow, pressure drop and mass transfer …
-
Frontal Variability in Drake Passage - A Modeling Study
… stronger wind stress, the difference is reduced. Form drag from large variation of bottom topography shows little change with different wind stress in the model. The form drag in Drake Passage is calculated to be one order of magnitude larger than the local wind stress. The bottom skin stress can …
-
A subgrid approach for unresolved topography in shallow water hydrodynamic modeling
… have neglected key aspects of flow resistance. Form drag exerted by unresolved subgrid features cannot be arbitrarily neglected for shallow flow dynamics as it introduces complexity through directional variability. That is, the conventional approach to modeling subgrid frictional effects is …
-
Comparative resistance calculations for SLICE/SWATH hulls
Comparative resistance calculations are performed for SLICE and SWATH hulls. For the purposes of this study, the primary difference between these two hull types is in the underwater pods. It is assumed that both ship types have identical surface piercing struts, speed, and displacement. The …
-
Experimental observation of the relationship between the pressure drop and flow rate of radial flow through porous media.
… geometric analysis is necessary to determine the form drag coefficient and end effects. Obtaining these values will allow for a full pressure drop – flow rate relationship prediction.
-
ΔΙΑΣΤΟΛΗ ΚΑΙ ΜΗΧΑΝΙΣΜΟΙ ΑΠΟΚΟΛΛΗΣΗΣ ΣΕ ΥΓΡΗ-ΣΤΕΡΕΗ ΡΕΥΣΤΟΠΟΙΗΜΕΝΗ ΚΛΙΝΗ
… FIELD ARE CLEARLY STRESSED OUT. THE RELEVANCE OF FORM DRAG CONSIDERATIONS IS EMPHASIZED. A SIMPLIFIED (2-Δ, ONE PHASE) FLOW MODEL IS DEVELOPED TO ATTEMPT A QUALITATIVE AND THEORETICAL TREATMENT OF THE SHEAR STRESS DEPENDANCE ON POROSITY AND FLOW FIELD. RESULTS WELL IN LINE WITH THE APPROACH …
-
Drag Characteristics of Objects in Two-phase Boiling Flows
… is the effect of boiling on the fluid-dynamic drag on objects. In addition to enhancing our understanding of the boiling processes, this aspect has been identified to have some scientific applications in nuclear safety analyses. A theoretical analysis of the drag characteristics of objects in …
-
Influence of momentum excess on the pattern and dynamics of intermediate-range stratified wakes
… ocean states. In cases where the body forces, form drag and thrust were balanced, fewer and less expansive surface signatures were observed. In cases where the balance was disturbed by either lack or excess of self-propulsion, a greater perturbation was achieved, particularly in the ocean …
-
RANS-based aerodynamic optimization of a pickup truck: performance assessment and verification of add-on improvements
… the most accurate approach for predicting drag trends across configurations. The Lag EB k−ε model demonstrated superior fidelity in predicting ∆CD trends and was selected for the baseline flow topology study and optimization phases. The baseline flow topology analysis identified various …
-
Interactions between flow hydraulics and channel morphology in step-pool streams
… characteristics in the study reach reflected the form drag and spill resistance generated by step-pool sequences consisting of LWD and/or large clasts. The combined results of the flume and field investigations illustrate several aspects of the interactions between hydraulics and channel …
-
A Study Of Single-Phase Flow Through Irregular Miniature Channel Cross-Sectional Geometry And Porous Media
… including: required power, required energy, form drag, viscous drag, correction factor selection by determining the onset of turbulence using modified Reynolds numbers, and many other critical details for accurately predicting theoretical differential pressure and overall flow behavior …
-
Mechanisms and optimisations of 3D shock control bumps.
… control bumps are analysed through pressure drag analysis, as well as wave drag analysis that uses a far-field method. It is shown that the bumps reduce both the wave drag and the form drag. Comparisons of the performance of these two types of bumps indicate that the 3D bump has an advantage …
-
Airfoil aerodynamic performance enhancement by manipulation of trapped vorticity concentrations using active flow control
… moment along with a significant reduction in form drag. The effectiveness of actuation for mitigation of the adverse effects of separation is demonstrated on a high-lift flap system. It is anticipated that flow control augmentation of the performance of current and future flight platforms will …
-
Molecular, Functional, and Behavioural Investigations in Tripedalia cystophora
… distribution. A hydrodynamic model including form drag, stratification drag and buoyancy predicted penetration depths below the upper boundary of the halocline, indicating a physical limitation and supporting the stratification hypothesis proposed here. An abstract three-level organisation of …
Page 1 of 3