Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1905 for “"Fabrication process"”.

  1. A simple p-well CMOS fabrication process

    … focused on the development of a p-well CMOS fabrication process that has fast turnaround time, is relatively inexpensive, and is easy to use. Most current CMOS fabrication processes use either n-well or twin-well techniques in order to provide better device isolation and improved circuit …

    iastate Repository record for A simple p-well CMOS fabrication process (opens in a new tab)

  2. Modelling of the filament-winding fabrication process

    A stress model of the filament-winding fabrication process, previously implemented in a finite element program, was improved. Pre- and post-processing codes were developed to make the program easier and more efficient to use. A program which is used to design filament wound composite rocket motor …

    vt Repository record for Modelling of the filament-winding fabrication process (opens in a new tab)

  3. A novel fabrication process for CMUTs in air

    A novel fabrication method for producing capacitive micromachined ultrasonic transducers (CMUTs) is presented. The process uses conductive silicon on insulator (SOI) substrates to produce an unstressed transducer diaphragm. By etching release holes through the device layer and selectively removing …

    texas Repository record for A novel fabrication process for CMUTs in air (opens in a new tab)

  4. Fabrication process development for silicon micro and nanosystems

    … This thesis work concentrates on developing fabrication techniques for silicon micro and nanostructures. The goal was to achieve nanometer-scale feature size and simultaneously significantly speed up the most time consuming phases. For testing purposes also functional devices were designed …

    aalto Repository record for Fabrication process development for silicon micro and nanosystems (opens in a new tab)

  5. Epitaxial regrowth based fabrication process for vertical cavity lasers

    … is based on an all-epitaxial device. The fabrication process involves epitaxial regrowth over shallow mesas to incorporate these intra-cavity patterns that have direct overlap with the optical mode. These intracavity gratings are defined by lithography and a selective etching process after …

    texas Repository record for Epitaxial regrowth based fabrication process for vertical cavity lasers (opens in a new tab)

  6. Fabrication process and characteristics of a silicon strip detector

    … emphasis on the silicon PIN diode detector. A fabrication process for silicon surface barrier position sensitive solid state detectors has been developed at UBC based on the work of J.B.A. England. A fabrication process recipe is included. A prototype surface barrier detector system has been …

    ubc Repository record for Fabrication process and characteristics of a silicon strip detector (opens in a new tab) Download PDF for Fabrication process and characteristics of a silicon strip detector (opens in a new tab)

  7. Investigation into the dispensing-based fabrication process for tissue scaffolds

    … cell growth and new tissue regeneration. For fabrication of tissue scaffolds with individual external geometry and predefined inner structure, rapid prototyping (RP) systems based on fluid dispensing techniques have proved to be very promising. The present research conducted a comprehensive …

    sask Repository record for Investigation into the dispensing-based fabrication process for tissue scaffolds (opens in a new tab)

  8. Investigation of fabrication process development for integrated optical grating structures

    … ruling and photolithography, alternate fabrication techniques are investigated. Exposure by e-beam and laser are two direct write methods which are used. These methods preclude the need of a mask, require few processing steps, and can be used to write features of sizes desired for …

    wvu Repository record for Investigation of fabrication process development for integrated optical grating structures (opens in a new tab)

  9. Sputtered mercury cadmium telluride heterojunction devices : electrical characteristics and fabrication process

    <p>The main objective of this thesis was to grow high quality epitaxial films of the compound semiconductor Mercury-Cadmium-Telluride (MCT) on Silicon and MCT substrates,using sputtering technology. The research was aimed at investigating the heterojunction behaviour at such interfaces. Detailed …

    njit Repository record for Sputtered mercury cadmium telluride heterojunction devices : electrical characteristics and fabrication process (opens in a new tab)

  10. Fabrication Process for Carbon Nanotube Based Field Emission X-ray Generator Cathodes

    … FE. Field emission is a quantum tunnelling process that is achieved by applying a voltage difference between the anode and cathode under high vacuum conditions. Electrons will tunnel from the tip of CNT towards the anode; upon striking the anode, Bremsstrahlung and characteristic x-rays will …

    gatech Repository record for Fabrication Process for Carbon Nanotube Based Field Emission X-ray Generator Cathodes (opens in a new tab)

  11. Deep neural network-driven enhancement of the microfiber design and fabrication process

    Microfluidic device-based fabrication of microstructures is a largely empirical effort due to the nature of the manufacturing process. However, in moving in moving toward autonomous manufacturing, it is critical that methodologies be developed whereby researchers can accurately predict microfiber …

    iastate Repository record for Deep neural network-driven enhancement of the microfiber design and fabrication process (opens in a new tab)

  12. Development of Fabrication Process for Twisted Rhombohedral Trilayer-Bilayer Graphene Transport Devices

    … presents the development and refinement of a fabrication methodology for twisted rhombohedral trilayer-bilayer graphene (tRTBG) transport devices. The tRTBG system is predicted to host flat electronic bands with high Chern numbers at twist angles of 1.1°~1.4°, promoting highly correlated, …

    washington Repository record for Development of Fabrication Process for Twisted Rhombohedral Trilayer-Bilayer Graphene Transport Devices (opens in a new tab)

  13. Development of Fabrication Process to Prototype a Novel Annular Thermoelectric Generator Design

    The goal of this project is to develop a fabrication process for an annular thermoelectric module using a powder methodology that can potentially later be automated for high volume manufacturing. Prototypes were produced and experimentally tested to study and characterize thermal and effective …

    mcmaster Repository record for Development of Fabrication Process to Prototype a Novel Annular Thermoelectric Generator Design (opens in a new tab)

  14. The Design And Development Of An Additive Fabrication Process And Material Selection Tool

    … under development . Of this subset, Additive Fabrication (AF), or more commonly known as Rapid Prototyping (RP), acquires much attention due to its unique and futuristic approach to the production of physical parts directly from 3D CAD data, CT or MRI scans, or data from laser scanning systems …

    ucf Repository record for The Design And Development Of An Additive Fabrication Process And Material Selection Tool (opens in a new tab)

  15. Fundamental Studies of Copper Bimetallic Corrosion in Ultra Large Scale Interconnect Fabrication Process

    … and inhibition in ultra large scale interconnect fabrication process is explored. Corrosion behavior of physical vapor deposited (PVD) copper on ruthenium on acidic and alkaline solutions was investigated with and without organic inhibitors. Bimetallic corrosion screening experiments were carried …

    unt Repository record for Fundamental Studies of Copper Bimetallic Corrosion in Ultra Large Scale Interconnect Fabrication Process (opens in a new tab)

Page 1 of 96