Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Fabry Perot filter"”.

  1. Erbium-doped fiber ring laser tuning using an intra-cavity Fabry-Perot filter

    … fiber ring laser using an intra-cavity Fabry-Perot filter as the tuning element is investigated. Tuning is achieved by varying the applied voltage which controls the FP cavity length. The laser's wavelength is monitored using an optical spectrum analyzer to determine the laser's spectral …

    tamu Repository record for Erbium-doped fiber ring laser tuning using an intra-cavity Fabry-Perot filter (opens in a new tab)

  2. Tunable erbium-doped fiber ring laser using an intra-cavity filter

    … of an erbium-doped fiber ring laser using both a Fabry-Perot filter and an electro-optic tunable filter has been experimentally demonstrated. The rate of frequency change is determined by monitoring the fringes produced by laser light transmitted through a fiber Fabry-Perot interferometer. The …

    tamu Repository record for Tunable erbium-doped fiber ring laser using an intra-cavity filter (opens in a new tab)

  3. A time domain approach to sensitivity analysis of direct detection optical FDMA networks with OOK modulation

    … as the modulation technique and single- cavity Fabry-Perot (FP) filters in the receiver as demultiplexers. The expression is derived in the time domain using the impulse response of the single-cavity Fabry-Perot filter and the complex baseband equivalent of the received dense WDM optical signal. …

    nps Repository record for A time domain approach to sensitivity analysis of direct detection optical FDMA networks with OOK modulation (opens in a new tab)

  4. A near-infrared filter system and study of solar umbral dots at 1.6 µm

    … solar magnetic fields (below 1000 Gauss), a new filter system (magnetograph) working in near-IR wavelength has been developed in this work. This system includes an interference prefilter (FWHM - 40 [Angstrom]), a liquid crystal magnetic analyzer, a near-IR bireffingent filter (FWHM - 2.5 …

    njit Repository record for A near-infrared filter system and study of solar umbral dots at 1.6 µm (opens in a new tab)

  5. Analysis of direct detection lightwave systems with optical amplifiers

    … model uses either a finite-time integrator or Fabry-Perot filter operating in a sinfgle channel or multi-channel environment. We take into account the optical amplifier noise, the postdetection receiver noise, the shot noise, and the effect of the nonzero laser linewidth.

    nps Repository record for Analysis of direct detection lightwave systems with optical amplifiers (opens in a new tab)

  6. A simple analytical model for dense WDM/OOK systems

    … based upon a close approximation of the optical Fabry-Perot filter in the receiver as a single-pole RC filter for signals that are bandlimited to a frequency band approximately equal to one sixtieth of the Fabry-Perot filter's free spectral range. Our model can handle bit rates up to 2.5 Gb/s for …

    nps Repository record for A simple analytical model for dense WDM/OOK systems (opens in a new tab)

  7. A simple analytical model for asynchronous dense WDM/OOK systems

    … based upon a close approximation of the optical Fabry-Perot filter in the receiver as a single-pole RC filter for the signals that are bandlimited to a frequency band approximately equal to one sixtieth of the Fabry-Perot filter's free spectral range. Our model can handle bit rates up to 2.5 Gb/s …

    nps Repository record for A simple analytical model for asynchronous dense WDM/OOK systems (opens in a new tab)

  8. Thin-film optical filters for selective transmission and black-body reflection in pyroelectric energy systems.

    … this process, several thin-film optical filters were designed for transmitting laser excitation in the near-infrared region, while simultaneously reflecting black-body radiation for pyroelectric materials. Designs include a classical Fabry-Perot structure with gold and tantalum pentoxide, …

    louisville Repository record for Thin-film optical filters for selective transmission and black-body reflection in pyroelectric energy systems. (opens in a new tab)

  9. Nanophotonic filters for digital imaging

    … sensors, due to the limitations of the dye-based filters. Further improvement is required if the full potential of digital imaging is to be realised. In alternative systems, where accurate colour reproduction is a priority, existing equipment is too bulky for anything but specialist use. In this …

    glasgow Download PDF for Nanophotonic filters for digital imaging (opens in a new tab)

  10. The application of fibre Bragg grating networks as strain sensors and as phased array antenna true time delay elements

    … and surface mounted uniform period and fibre Fabry-Perot filter gratings. A fibre Bragg grating sensor demultiplexing scheme based on a liquid crystal filled Fabry-Perot etalon tuneable transmission filter was proposed, successfully constructed and fully characterised. Three characteristics of …

    aston Download PDF for The application of fibre Bragg grating networks as strain sensors and as phased array antenna true time delay elements (opens in a new tab)

  11. Characterization of Fiber Tapers for Fiber Devices and Sensors

    … various applications, ranging from resonators, filters, interferometers to sensors. This thesis studies the properties of fiber tapers for the purpose of making tapered-based devices and sensors in aerospace related application where small size and light weight are critical. This thesis includes …

    ottawa-retro Repository record for Characterization of Fiber Tapers for Fiber Devices and Sensors (opens in a new tab)

  12. Optical multilayers with diamond-like thin films

    … the individual layers in a multilayer stack. A Fabry-Perot filter consisting of 21 quarter-wave layers was deposited with a peak transmission of 65 %. It is shown how this routine can be extended to optically absorbing materials such as carbon.

    ubc Repository record for Optical multilayers with diamond-like thin films (opens in a new tab) Download PDF for Optical multilayers with diamond-like thin films (opens in a new tab)

  13. High-power and high-aspect-ratio optical coatings by atomic layer deposition

    … the desired optical function, which includes filters, beam splitters, anti-reflection coatings, and high-reflectivity mirrors. We investigate several aspects of high-power coatings and the particular suitability of atomic layer deposition (ALD) to meet many of the design goals. After reviewing …

    umn Repository record for High-power and high-aspect-ratio optical coatings by atomic layer deposition (opens in a new tab)

  14. Οπτικά κυκλώματα μη γραμμικών ινών για την υλοποίηση σύνθετων διαδικασιών επεξεργασίας σήματος σε οπτικά δίκτυα επικοινωνιών

    … circuit is based, in turn, on the use of a Fabry-Perot filter (FPF) and a subsequent optical power limiter, which drastically suppresses the intense amplitude modulation of the FPF output and delivers the high-quality signal of the recovered clock. The DPSK regenerator relies on the decoding …

    greece Repository record for Οπτικά κυκλώματα μη γραμμικών ινών για την υλοποίηση σύνθετων διαδικασιών επεξεργασίας σήματος σε οπτικά δίκτυα επικοινωνιών (opens in a new tab)

  15. Terahertz oscillation and stimulated emission from planar microcavities

    In the past decades, the miniaturization in optics led to new devices with structural sizes in the range of the light wavelength, where the photonic modes are con- fined and the number of states is limited. In the smallest microcavities, i.e. micrometer sized optical resonators, the propagation of …

    qucosa-diss

  16. Compact fabry-perot filters for mid-infrared spectroscopy in microreactors

    … in this work, focusing on the development of Fabry-Perot (FP) filters, which are the essential wavelength-selective components. <br><br>In this thesis, three types of FP filters based on Bragg mirrors are demonstrated: two static FP filters, emphasizing stable and fast detecting systems; and a …

    freiburg-diss Repository record for Compact fabry-perot filters for mid-infrared spectroscopy in microreactors (opens in a new tab)

  17. Design and Applications of Volume Holographic Optical Elements

    … transmission peaks is found using multi-mirror Fabry-Perot interferometer theory, and expressions are given for their location and width. The effects of including the variation in average index when modeling gratings recorded in the presence of absorption is presented. These effects are seen to …

    ucf Repository record for Design and Applications of Volume Holographic Optical Elements (opens in a new tab)

  18. Investigation into High Spectral Resolution Lidar Technologies

    … Lidar (HSRL) systems use a narrow band filter to spectrally separate Doppler broadened aerosol and molecular back-scattered return signals, which allows for range resolved profiles of aerosol extinction and backscatter. The narrow band filter is a key component, for which two novel …

    arizona-thes Repository record for Investigation into High Spectral Resolution Lidar Technologies (opens in a new tab)

Page 1 of 2