Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 147 for “"Fabry-Perot interferometer"”.

  1. A scanning Fabry Perot interferometer for laser mode analysis.

    A high resolution scanning Fabry Perot interferometer was constructed for the purpose of spectral analysis of gas laser radiation. The performance of the interferometer is evaluated and a finesse in excess of 250 is noted. Matching requirements and alignment procedures for application of the …

    nps Repository record for A scanning Fabry Perot interferometer for laser mode analysis. (opens in a new tab)

  2. Extrinsic Fabry-Perot interferometer for surface acoustic wave measurement

    … acoustic wave sensor based on an extrinsic Fabry-Perot interferometer is described. A single-mode fiber, used as the input/output fiber, and a multimode fiber, used mainly as a reflector, form an air-gap that acts as a low-finesse Fabry-Perot cavity. The Fresnel reference reflection from the …

    vt Repository record for Extrinsic Fabry-Perot interferometer for surface acoustic wave measurement (opens in a new tab)

  3. Extrinsic Fabry-Perot Interferometer System Using Wavelength Modulated Source

    … a new measurement system for the extrinsic Fabry-Perot interferometer (EFPI) sensor. Using a wavelength modulated source and a novel extended-gap EFPI, some of the limitations of interferometric signal demodulation are overcome. By scanning the output wavelength of a multilongitudinal mode …

    vt Repository record for Extrinsic Fabry-Perot Interferometer System Using Wavelength Modulated Source (opens in a new tab)

  4. High-finesse/small gap extrinsic Fabry-Perot interferometer and applications

    Conventional fiber-optic interferometers suffer from limitations that prevent real-time, absolute sensing of weak perturbations. A new sensing system that overcomes the above drawbacks by using a broadband light source, high-finesse/small-gap extrinsic Fabry-Perot cavity, and a novel demodulation …

    vt Repository record for High-finesse/small gap extrinsic Fabry-Perot interferometer and applications (opens in a new tab)

  5. Electro-optic Polymer Based Fabry-Perot Interferometer Devices for Optoelectronic Applications

    Fabry-Perot interferometer (FPI) devices are designed based on the electro-optic (EO) activities of nonlinear optical (NLO) polymer materials for tunable optical filters (TOFs) and spatial light modulators (SLMs). The performance of the EO polymer based FPI devices is theoretically modeled with …

    arizona-thes Repository record for Electro-optic Polymer Based Fabry-Perot Interferometer Devices for Optoelectronic Applications (opens in a new tab)

  6. Optical gas sensors based on correlation spectroscopy using a Fabry-Perot interferometer

    … sensors based on correlation spectroscopy with a Fabry-Perot interferometer (FPI). In this technique the spectral FPI transmission fringe pattern is matched with ro-vibrational absorption lines. To produce the cross correlation principle the FPI fringe pattern must be shifted along the frequency …

    soton Download PDF for Optical gas sensors based on correlation spectroscopy using a Fabry-Perot interferometer (opens in a new tab)

  7. Intracavity Laser Absorption Spectroscopy Using Quantum Cascade Laser And Fabry-perot Interferometer

    Intracavity Laser Absorption Spectroscopy (ICLAS) at IR wavelengths offers an opportunity for spectral sensing of low vapor pressure compounds. We report here an ICLAS system design based on a quantum cascade laser (QCL) at THz (69.9 m) and IR wavelengths (9.38 and 8.1 m) with an open external …

    ucf Repository record for Intracavity Laser Absorption Spectroscopy Using Quantum Cascade Laser And Fabry-perot Interferometer (opens in a new tab)

  8. Emission Spectroscopy of InGaAs Quantum Dots via High-resolution Fabry-Perot Interferometer

    … is about 9 GHz. The solution is to use a Fabry-Perot interferometer (FPI) as a tunable optical filter. This technique demands precise control of the distance between the two FPI mirrors. One way to control the length of the FPI cavity is to use an optical feedback method to lock the cavity …

    wvu Repository record for Emission Spectroscopy of InGaAs Quantum Dots via High-resolution Fabry-Perot Interferometer (opens in a new tab)

  9. Spatial Modulation of Light Using Surface Waves in a Fabry-Perot Interferometer

    Made available in DSpace on 2014-12-08T22:24:49Z (GMT). No. of bitstreams: 1 7020983.pdf: 2239558 bytes, checksum: 16ecbdc1c8e9805737c0059beb7da0fb (MD5) Previous issue date: 1970

    uiuc Repository record for Spatial Modulation of Light Using Surface Waves in a Fabry-Perot Interferometer (opens in a new tab)

  10. Development of fiber-optic bolometer based on a silicon fabry-perot interferometer

    … fiber-optic sensors based on an extrinsic Fabry-Perot (FP) interferometer formed by thin metal mirrors. The fiber-optic bolometer is indeed a fiber-optic extrinsic FP interferometric temperature sensor. We develop a model and use it to analyze the effect of key sensor parameters, including …

    msu Repository record for Development of fiber-optic bolometer based on a silicon fabry-perot interferometer (opens in a new tab)

  11. Fiber Fabry-Perot interferometer (FFPI) sensor using vertical cavity surface emitting laser (VCSEL)

    … of this frequency-modulated light from a fiber Fabry-Perot interferometer (FFPI) sensor produces fringe patterns which can be used to measure the optical path difference of the sensor. Spectral characteristics were measured for 850nm VCSELs to determine the combination of dc bias current, …

    tamu Repository record for Fiber Fabry-Perot interferometer (FFPI) sensor using vertical cavity surface emitting laser (VCSEL) (opens in a new tab)

  12. Application of a Fabry-Perot interferometer for measuring machining forces in turning operations

    The FP interferometer was found to be feasible for detecting changes in machining forces. The fiber optic sensor was able to detect increases in strain corresponding to force increases detected by a dynamometer. The FP interferometer system must progress in several ways. A better data acquisition …

    vt Repository record for Application of a Fabry-Perot interferometer for measuring machining forces in turning operations (opens in a new tab)

  13. Optical Fiber Fabry-Perot Interferometer based Sensor Instrumentation System for Low Magnetic Field Measurement

    … in the sensor gage using a modified extrinsic Fabry-Perot Interferometer configuration. Because of the magnetostrictive reflector the gap length depends on the magnetic fields applied to the sensor. Since the diameter of the magnetostrictive sensor gage is 125 micrometer which is the same as …

    vt Repository record for Optical Fiber Fabry-Perot Interferometer based Sensor Instrumentation System for Low Magnetic Field Measurement (opens in a new tab)

  14. Using a bistatic Fabry-Perot interferometer system to improve the estimation of thermospheric winds

    … method for synchronously using two ground-based Fabry-Perot interferometers (FPI) to estimate thermospheric winds. When a single FPI is used, assumptions must be made to obtain meaningful wind data, but there are inherent limitations to the usefulness of the data caused by the use of these …

    uiuc Repository record for Using a bistatic Fabry-Perot interferometer system to improve the estimation of thermospheric winds (opens in a new tab)

  15. Midlatitude thermospheric wind and temperature: networked Fabry-Perot interferometer observations and radiative transfer modeling

    … thermosphere, primarily using networks of Fabry-Perot interferometers (FPIs). First, we describe an algorithm which estimates thermospheric line-of-sight wind and temperature from raw FPI data. This new algorithm has the advantage over previous work in that it provides accurate temperature …

    uiuc Repository record for Midlatitude thermospheric wind and temperature: networked Fabry-Perot interferometer observations and radiative transfer modeling (opens in a new tab)

Page 1 of 8