Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 33 for “"Facesheet"”.

  1. Cohesive zone model for facesheet -core interface delamination in honeycomb FRP sandwich panels

    … efficient modeling techniques to study facesheet-core interface delamination in honeycomb fiber-reinforced polymer (HFRP) sandwich panels. Delamination problems are usually treated from a fracture mechanics point of view. However, interface delamination is generally very complex in …

    wvu Repository record for Cohesive zone model for facesheet -core interface delamination in honeycomb FRP sandwich panels (opens in a new tab)

  2. Strength evaluation of honeycomb FRP sandwich panels with sinusoidal core geometry

    … compression, out-of-plane shear, and study on facesheet laminates. Two analytical models, corresponding to pure compression and elastic buckling failure, respectively, are provided for panels subject to out-of-plane compression. The facesheet and core are attached by contact molding and are, …

    wvu Repository record for Strength evaluation of honeycomb FRP sandwich panels with sinusoidal core geometry (opens in a new tab)

  3. Effects of Low Velocity Impact on the Flexural Strength of Composite Sandwich Structures

    … because interlaminar damage within the composite facesheets is typical with composites but the addition of a core material results in added failure modes. Because the core is typically a weaker material than the surrounding facesheet material, the core is easily damaged by the impact loads. The …

    calpoly Repository record for Effects of Low Velocity Impact on the Flexural Strength of Composite Sandwich Structures (opens in a new tab)

  4. Effect of Sustainable and Composite Materials on the Mechanical Behavior of Sandwich Panels Under Edgewise Compressive Loading

    … task of the study was to use four different facesheet materials and the same Nomex honeycomb core. The number of facesheet layers consecutively increased from one layer to four layers on each side of the core for each material. The facesheet materials used were Hexply AGP280-5H Carbon Fiber …

    calpoly Repository record for Effect of Sustainable and Composite Materials on the Mechanical Behavior of Sandwich Panels Under Edgewise Compressive Loading (opens in a new tab)

  5. Compression After Impact Of Sandwich Composite Panels With Thick Facesheets

    … panels consisted of 16-ply carbon-epoxy facesheets bonded to an aluminum honeycomb core. A parametric study was undertaken to study the effect of facesheet layup, and core geometry. This was correlated with the indentation damage and compression strength and failure mode following …

    cornell Repository record for Compression After Impact Of Sandwich Composite Panels With Thick Facesheets (opens in a new tab)

  6. Thermal Cycling of Composite Honeycomb Sandwich Structure for Space Application

    … sandwich structure with Kevlar core and facesheet made of carbon fiber/ cyanate ester resin was studied. Sandwich material made of the different core and facesheet thickness were examined to study the thickness effect. To expose the samples to cryogenic temperature, the samples were …

    concordia Download PDF for Thermal Cycling of Composite Honeycomb Sandwich Structure for Space Application (opens in a new tab)

  7. Analysis of Static and Dynamic Deformations of Laminated Composite Structures by the Least-Squares Method

    … failure load to the beam's aspect ratio (AR), facesheet-core thickness ratio (FCTR) and facesheet-core stiffness ratio (FCSR). We then explore how failure of sandwich beams is affected by considering facesheet and core materials with different in-plane and transverse stiffness ratios. Computed …

    vt Repository record for Analysis of Static and Dynamic Deformations of Laminated Composite Structures by the Least-Squares Method (opens in a new tab)

  8. Identification and Quantification of Nonlinear Behavior in a Disbonded Aluminum Honeycomb Panel using Single Degree-of-Freedom Models

    … The quadratic stiffness is the result of the facesheet experiencing two distinct stiffness regimes, the first as the facesheet moves away from the core, and second as the facesheet presses into the core. The smaller cubic nonlinearity is thought to come from the additional stiffness imparted …

    purdue-thes Repository record for Identification and Quantification of Nonlinear Behavior in a Disbonded Aluminum Honeycomb Panel using Single Degree-of-Freedom Models (opens in a new tab)

  9. Through-Thickness Reinforcement and Repair of Carbon Fiber Based Honeycomb Structures Under Flexure and Tension of Adhesively Bonded Joints

    … these structures is when a delamination in the facesheet may form and spread, leading to a failure scenario. An investigation of adding a through thickness reinforcement (TTR) to these structures at the sample level that undergo four-point-bending, tension, and joining methods is conducted …

    odu Repository record for Through-Thickness Reinforcement and Repair of Carbon Fiber Based Honeycomb Structures Under Flexure and Tension of Adhesively Bonded Joints (opens in a new tab)

  10. Moisture Diffusion and its Effect on Performance of Thermoplastic Composite Sandwich Panels with Recycled PET Foam Cores

    … outer layers of thermoplastic composite sheets (facesheets) encapsulating a core material such as lightweight foams or honeycomb structures. Sandwich panels with recycled foam core offer a remarkable synergy between advanced engineering and sustainable practices. This study primarily focuses on …

    concordia Download PDF for Moisture Diffusion and its Effect on Performance of Thermoplastic Composite Sandwich Panels with Recycled PET Foam Cores (opens in a new tab)

  11. Hydrokinetic turbine composite blades and sandwich structures: Damage evaluation and numerical simulation

    … increasing the contact area between the core and facesheet was studied. Two tests (impact and flat-wise tension) were carried out to examine the integrity of the structure. A finite element model was developed to study the damage due to localized load, such as impact load. The results obtained …

    must-thes Repository record for Hydrokinetic turbine composite blades and sandwich structures: Damage evaluation and numerical simulation (opens in a new tab)

  12. Stiffness and Strength of K-Cor Sandwich Structures under Compression and Shear Loading Conditions

    Pin reinforced sandwich cores, with composite facesheets, offer a great means of structural construction owing to their low weight and high stiffness and strength. In this research, FE models have been developed to obtain their stiffness and strengths under compressive and shear loading conditions. …

    maryland Repository record for Stiffness and Strength of K-Cor Sandwich Structures under Compression and Shear Loading Conditions (opens in a new tab)

  13. An Investigation of Damage Arrestment Devices on Carbon Fiber Sandwich Specimens Under Dynamic Loading

    … device embedded between a carbon fiber facesheet and foam core to find whether there is an increase in the structural integrity of the sandwich composites. Experimental and theoretical finite element analyses are implemented for two different composite sandwich geometries; plates and …

    calpoly Repository record for An Investigation of Damage Arrestment Devices on Carbon Fiber Sandwich Specimens Under Dynamic Loading (opens in a new tab)

  14. Broadband Acoustic Liner Optimization Study Using Novel Poro-elastic Materials

    … Sensitivity studies on the overall liner shape, facesheet properties, poro-elastic material properties, MPP's, as well as size and placement of embedded masses assist in successfully achieving broadband attenuation. Within the finite element study, an optimization tool will provide additional …

    vt Repository record for Broadband Acoustic Liner Optimization Study Using Novel Poro-elastic Materials (opens in a new tab)

  15. Characterization and Modeling of Deformable Mirrors for Extreme Adaptive Optics

    … a model to capture the dynamics of the DM facesheet, employ estimation techniques to calibrate it against a MagAO-X DM, and integrate it with an AO simulation to assess the impact of DM dynamics on AO performance.

    arizona-thes Repository record for Characterization and Modeling of Deformable Mirrors for Extreme Adaptive Optics (opens in a new tab)

  16. Enhancing the deformability of elastic memory sandwich composites with elastic memory/conventional epoxy hybrid facesheets

    … the laminate with conventional epoxy, to prevent facesheet shear. The following variables were used to further investigate the viscoelastic behavior of the specimens: bending temperature, deflection rate, and hold time at maximum deflection. Results are presented in the form of force-deflection, …

    colostate Repository record for Enhancing the deformability of elastic memory sandwich composites with elastic memory/conventional epoxy hybrid facesheets (opens in a new tab)

  17. Air-coupled ultrasonic measurements in composites

    … detection sensitivity of disbonds under thick-facesheet using air-coupled Lamb waves was investigated in a set of honeycomb sandwiches with 3-ply to 15-ply facesheets. Furthermore, Air-coupled scan results will be discussed for a variety of composite materials and structures, from thin …

    iastate Repository record for Air-coupled ultrasonic measurements in composites (opens in a new tab)

  18. Fabrication and Structural Performance of Random Wetlay Composite Sandwich Panels

    … cost. By utilizing these composite panels as the facesheets of honeycomb sandwich structures, it is possible to greatly increase the bending stiffness of the composite without adding significant weight. The random wetlay composite facesheets used in this research consisted of 25% E-glass fibers …

    vt Repository record for Fabrication and Structural Performance of Random Wetlay Composite Sandwich Panels (opens in a new tab)

  19. Numerical Analysis of a Morphing Fairing for Folding Wingtip Joints

    … core sandwiched between two elastomeric facesheets. The GATOR skin is supported by a hinged rib, which is co-located with the SAH hinge but rotates independently of the folding angle. Additional ribs connected only to the fairing are added to maintain its cross-section shape at their …

    bristol Repository record for Numerical Analysis of a Morphing Fairing for Folding Wingtip Joints (opens in a new tab) Download PDF for Numerical Analysis of a Morphing Fairing for Folding Wingtip Joints (opens in a new tab)

  20. Development, testing, and analytical modeling of fiber-reinforced polymer bridge deck panels

    … Analytical models were used to predict critical facesheet wrinkling that had been observed during phase two. A three-dimensional model using ABAQUS was developed to analyze each panel’s behavior. A parametric study considering a wide variety of parameters was also conducted to further evaluate …

    must-thes Repository record for Development, testing, and analytical modeling of fiber-reinforced polymer bridge deck panels (opens in a new tab)

Page 1 of 2