Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Fan design"”.

  1. Bio-Inspired Axial Fan Design, 3D Printing Fabrication and Characterization for Noise and Flow Performance Optimization

    … regulations. In this context, axial-flow fans represent a key technological component, acting as major sources of both tonal and broadband aerodynamic noise, with direct implications for public health, building energy performance, and urban liveability. Mechanical fans, particularly axial …

    trento Repository record for Bio-Inspired Axial Fan Design, 3D Printing Fabrication and Characterization for Noise and Flow Performance Optimization (opens in a new tab)

  2. Evaluating the Impact of Fan Design and Air Speed on User and Nearby Occupants’ Thermal Comfort in a Shared Office

    … the thermal environment of other occupants. Desk fans are common PCS cooling devices, but their use in shared workspaces raises questions about the differential impact on the primary user and nearby occupants. Limited empirical evidence exists on how local air speed and fan technology jointly …

    waterloo Repository record for Evaluating the Impact of Fan Design and Air Speed on User and Nearby Occupants’ Thermal Comfort in a Shared Office (opens in a new tab)

  3. Incorporation of sweep in a transonic fan design using a 3D blade-row geometry package intended for aero-structural-manufacturing optimization

    … was applied to an existing transonic fan geometry to investigate effects of sweep. Results were obtained for the effect of forward and backward sweep on the aerodynamic performance, and the associated effect on centrifugal stress levels was obtained. The investigation demonstrated the …

    nps Repository record for Incorporation of sweep in a transonic fan design using a 3D blade-row geometry package intended for aero-structural-manufacturing optimization (opens in a new tab)

  4. CFD-Informed Neural Networks for Centrifugal Fan Design: Combining Simulation and Deep Learning to Predict the Performance of Parametrically Varied Fan Blades

    … development of a surrogate model for centrifugal fan performance, focusing on the Same Sky CBM-97S series DC fan. The objective is to develop a validated CFD model of the centrifugal fan and to use the model to train neural networks that can predict the performance of varying blade geometries. To …

    chalmers Repository record for CFD-Informed Neural Networks for Centrifugal Fan Design: Combining Simulation and Deep Learning to Predict the Performance of Parametrically Varied Fan Blades (opens in a new tab)

  5. Analysis of Radial Inlet Distortion on Transonic Fan Performance

    Improving fan design and performance prediction requires an understanding of the impacts of inlet distortions. Inlet distortion describes any non-uniform distribution in the flow, usually referring to deviations in pressure and temperature. Using full annulus Unsteady Reynolds-Averaged Navier …

    byu Repository record for Analysis of Radial Inlet Distortion on Transonic Fan Performance (opens in a new tab) Download PDF for Analysis of Radial Inlet Distortion on Transonic Fan Performance (opens in a new tab)

  6. Using ANSYS Workbench Computer Environment in Turbomachinery Design Process

    The main focus of designing turbomachinery is to analyze and optimize the aerodynamic efficiency and structural integrity of the machine. The preferred way to perform aerodynamic and structural analysis is to connect the analyses and shorten the analysis time as much as possible. ANSYS, Inc. …

    embry-riddle Repository record for Using ANSYS Workbench Computer Environment in Turbomachinery Design Process (opens in a new tab)

  7. HAPSS, Hybrid Aircraft Propulsion System Synthesis

    … (ESAero), with the creation of a propulsion fan design tool. Since the completion of this contract in July 2010, the HAPSS program has been expanded to combine the many aspects of a hybrid propulsion system such as the propulsive fans, electric motors, generators, and controllers, and the …

    calpoly Repository record for HAPSS, Hybrid Aircraft Propulsion System Synthesis (opens in a new tab)

  8. Optimum Design of Compact, Quiet, and Efficient Ventilation Fans

    Axial ventilation fans are used to improve the air quality, remove contaminants, and to control the temperature and humidity in occupied areas. Ventilation fans are one of the most harmful sources of noise due to their close proximity to occupied areas and widespread use. The prolonged exposure to …

    vt Repository record for Optimum Design of Compact, Quiet, and Efficient Ventilation Fans (opens in a new tab)

  9. Noise Reduction in an Axisymmetric Supersonic Aircraft Inlet using Trailing Edge Blowing

    … Trailing Edge Blowing (TEB) to reduce the engine fan noise from a turbofan propulsion simulator (TPS). The TPS is 4.1 in. (10.4 cm) in diameter and is powered by compressed air. The supersonic inlet is connected to the TPS and is geometrically and acoustically scaled from a working design. The …

    vt Repository record for Noise Reduction in an Axisymmetric Supersonic Aircraft Inlet using Trailing Edge Blowing (opens in a new tab)

  10. Full Scale Experimental Transonic Fan Interaction with a Boundary Layer Ingesting Total Pressure Distortion

    … architectures to accommodate stringent design goals for higher fuel efficiency, reduced cruise and taxi NOx emissions, and reduced noise. Airframe designs most likely to satisfy the first goal feature architectures that lead to the formation of non-uniform flow introduced to the engine …

    vt Repository record for Full Scale Experimental Transonic Fan Interaction with a Boundary Layer Ingesting Total Pressure Distortion (opens in a new tab)

  11. Aerodynamic analysis for hybrid electric distributed propulsion aircraft

    … configurations including: (1) the effect of the fan in controlling rear adverse pressure gradients to maintain a safe operating margin between cruise and buffet, (2) providing Mach flexibility, and (3) potential performance benefits of an integrated fan design compared with traditional under-wing …

    whiterose Download PDF for Aerodynamic analysis for hybrid electric distributed propulsion aircraft (opens in a new tab)

  12. The Effects of Various Inlet Distortion Profiles on Transonic Fan Performance

    … of how inlet flow distortion affects transonic fans enables improved fan design and performance prediction. Inlet distortion refers to non-uniformities in the incoming flow properties. Complex inlet ducts in high performance aircraft result in distorted flow at the fan inlet. In this thesis, two …

    byu Repository record for The Effects of Various Inlet Distortion Profiles on Transonic Fan Performance (opens in a new tab) Download PDF for The Effects of Various Inlet Distortion Profiles on Transonic Fan Performance (opens in a new tab)

  13. Experimental and numerical investigations on the flow characteristics of rotary machineries

    … aerodynamic and acoustic characteristics of case fans for computer cooling applications; and 2). A comparative study on the aeromechanic performances and wake characteristics of innovative dual-rotor wind turbines (DRWTs) and conventional single-rotor wind turbine (SRWT). For the first topic, by …

    iastate Repository record for Experimental and numerical investigations on the flow characteristics of rotary machineries (opens in a new tab)

  14. Research on reducing costs of underground ventilation networks in South African mines

    … ventilation system by means of certain design methodologies that might improve the inefficient operational features on both the standard underground auxiliary fans and the main surface fans. The operational features of a standard 2-pole 45 kW issued auxiliary fan were tested, by using a …

    nwu-za Repository record for Research on reducing costs of underground ventilation networks in South African mines (opens in a new tab)

  15. Flow characteristics of jet fans in mines: experimental and numerical modeling

    The use of induction fans for face ventilation in room and pillar mines has proved to be an efficient, flexible, and viable technique. In addition to their merits over conventional systems, induction fans enable remote controlled mine operations with low maintenance requirements. Theoretical …

    vt Repository record for Flow characteristics of jet fans in mines: experimental and numerical modeling (opens in a new tab)

  16. Exploring GRIA2 Sequence Variations Using Virtual Reality

    … as a secondary structure. We also present a design for an experimental case study which compares our software versus a “traditional” workstation for ascertaining the severity of any Gria2 variant and its location within a 3d representation of the protein.

    rit Repository record for Exploring GRIA2 Sequence Variations Using Virtual Reality (opens in a new tab)

  17. A New Process for Creating Design Briefs to Improve Design Innovations in Home Health Care

    … provision, at a time when the demand for well-designed home healthcare products (HHCPs) and associated services is rapidly growing. Research into their approaches found that innovation strategies and techniques adopted by many HHCP suppliers have not matured to realise the best innovative …

    arts-london Download PDF for A New Process for Creating Design Briefs to Improve Design Innovations in Home Health Care (opens in a new tab)