Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"Fastener hole"”.

  1. Robotic fastener hole inspection with 2D ultrasonic phased array

    Fasteners such as bolts and rivets are widely used in mechanical structures, but the stress concentrations around fastener holes often act as initiation sites for cracks and fatigue failures. In high-reliability industries such as aerospace and nuclear power, routine inspection of fastener holes is …

    bristol Repository record for Robotic fastener hole inspection with 2D ultrasonic phased array (opens in a new tab) Download PDF for Robotic fastener hole inspection with 2D ultrasonic phased array (opens in a new tab)

  2. An Investigation of Damage Arrestment Devices Application with Fastener/Hole Interaction

    … arrestment devices application interacts with a fastener in a composite sandwich panel. The primary objective of the damage arrestment device was to prevent the failure of the composite face sheet, such as crack propagation, around the hole/fastener joint. The damage arrestment devices are made …

    calpoly Repository record for An Investigation of Damage Arrestment Devices Application with Fastener/Hole Interaction (opens in a new tab)

  3. Stresses at the Tips of Cracks Emanating from the Loaded Fastener Hole

    … from the boundary of an internal circular fastener hole in a plate loaded by a pin or rivet that just fills the hole and is pulled in the negative y-direction, in the plane of the plate. Solutions are obtained in a conformally mapped region in the form of series for different crack lengths …

    unm Repository record for Stresses at the Tips of Cracks Emanating from the Loaded Fastener Hole (opens in a new tab)

  4. A state estimation framework for ultrasonic structural health monitoring of fastener hole fatigue cracks

    … and tracking of fatigue cracks emanating from fastener holes in metallic structural components. The sensing method utilizes attached ultrasonic transducers, and tracking of damage is achieved by employing a state estimation framework that incorporates a well-known empirical model for crack …

    gatech Repository record for A state estimation framework for ultrasonic structural health monitoring of fastener hole fatigue cracks (opens in a new tab)

  5. The Effectiveness of Damage Arrestment Devices in Delaying Fastener-Hole Interaction Failures in Carbon Fiber Polyurethane Foam Composite Sandwich Panels Subjected to Static and Dynamic Loading Under Increased Temperatures

    … and bearing stress failures resulting from fastener-hole interactions. Composite sandwich panels, with and without damage arrestment devices (DADs), were subjected to monotonic compression at a rate of 5mm per second, and compression-compression fatigue at 50% yield at an amplitude of 65%, …

    calpoly Repository record for The Effectiveness of Damage Arrestment Devices in Delaying Fastener-Hole Interaction Failures in Carbon Fiber Polyurethane Foam Composite Sandwich Panels Subjected to Static and Dynamic Loading Under Increased Temperatures (opens in a new tab)

  6. The development and evaluation of an experimental apparatus for the investigation of fastener pull-through failure in graphite-epoxy laminates.

    This thesis examines the failure at a fastener hole in a composite fuel tank skin due to hydraulic ram; i.e. fluid pressure due to a penetrating projectile. An experimental apparatus was set up to investigate the triaxial loading conditions at the fastener hole so that an M-P-N failure surface …

    nps Repository record for The development and evaluation of an experimental apparatus for the investigation of fastener pull-through failure in graphite-epoxy laminates. (opens in a new tab)

  7. Friction Taper Plug Welding as a Repair Method for Fatigue Damage Around Fastener Holes in Aerospace Structures

    … components experience fatigue damage around fastener holes. This damage can be mitigated by enlarging fastener holes. There is no effective repair procedure once holes reach a maximum allowable size. Damaged components must be replaced. A suitable repair process would lead to substantial …

    byu Repository record for Friction Taper Plug Welding as a Repair Method for Fatigue Damage Around Fastener Holes in Aerospace Structures (opens in a new tab) Download PDF for Friction Taper Plug Welding as a Repair Method for Fatigue Damage Around Fastener Holes in Aerospace Structures (opens in a new tab)

  8. Understanding the process-structure-property-performance relationship in the repair of fastener holes in high-strength aluminum alloys using additive friction stir deposition.

    … critical feature in aerospace assemblies is the fastener holes, where localized stress concentrations promote crack initiation and reduce service life. This dissertation investigates the feasibility of repairing oversized fastener holes in high-strength aluminum alloys using AFSD while …

    baylor Repository record for Understanding the process-structure-property-performance relationship in the repair of fastener holes in high-strength aluminum alloys using additive friction stir deposition. (opens in a new tab) Embargoed until 2028-08-15

  9. Real - time detection of fatigue cracks at multiple holes in 7075 aluminum using acoustic emission.

    … occurred in several web section attachment holes. Previous work, concerned with fatigue data, used a finite element code to design a specimen which modeled the actual section of the beam at one particular fastener hole near wing station 49. Acoustic emission testing was used to determine if …

    nps Repository record for Real - time detection of fatigue cracks at multiple holes in 7075 aluminum using acoustic emission. (opens in a new tab)

  10. Understanding the fatigue and fracture mechanisms of cold spray additive repairs

    … ranging from 1.2 to 1.9 MPa√m. Finally realistic fastener hole repairs were made in AA2024 and AA7075, which were found to perform as well or in some cases significantly better than the epoxy filled controls.

    alabama Repository record for Understanding the fatigue and fracture mechanisms of cold spray additive repairs (opens in a new tab)

  11. Signal processing methods to quantify scattering of angle-beam shear waves from through-holes in plates

    … of angle-beam ultrasonic waves from through-holes in plates. This topic is of interest because increased understanding of the scattering of ultrasonic waves by a defect is important for the development of many nondestructive evaluation (NDE) applications. Angle-beam techniques are commonly …

    gatech Repository record for Signal processing methods to quantify scattering of angle-beam shear waves from through-holes in plates (opens in a new tab)

  12. Stress-corrosion fatigue cracking of cold expanded components

    Fasteners like rivets are widely used for assembling parts in the aircraft industry. The fasteners not only help in easy assembly and dismantling of the parts, but also help in proper distribution of the load applied on the body. However, in order to fasten two parts together, a number of holes …

    ttu Repository record for Stress-corrosion fatigue cracking of cold expanded components (opens in a new tab)

  13. Analysis of composite laminates with multiple fasteners by boundary collocation technique

    Mechanical fasteners remain the primary means of load transfer between structural components made of composite laminates. As, in pursuit of increasing efficiency of the structure, the operational load continues to grow, the load carried by each fastener increases accordingly. This accelerates …

    arizona-thes Repository record for Analysis of composite laminates with multiple fasteners by boundary collocation technique (opens in a new tab)

  14. Strain measurement using neutron diffraction

    … uses Pawley refinement permitting both whole pattern and individual peak profile analysis and its positioner allow's specimens weighing 250 kg to be placed with an accuracy of 100 µm. Strain measurement using neutron diffraction has been investigated under two extreme circumstances: very …

    the-open-u Download PDF for Strain measurement using neutron diffraction (opens in a new tab)

  15. Delamination Arrestment in Bonded-Bolted Composite Structures by Fasteners

    … shear, and opening moment are concentrated. The fasteners provide a substantiation path for the FAA damage tolerance requirement for composite bonded joints (FAR 23.573). A comprehensive understanding of delamination arrestment by fasteners was developed. The fastener provides crack arrest …

    washington Repository record for Delamination Arrestment in Bonded-Bolted Composite Structures by Fasteners (opens in a new tab)

  16. Μελέτη διεγέρσεων στη χρήση μαγνητομέτρου SQUID με εφαρμογή σε μη καταστροφικούς ελέγχους

    … involving aluminum plates, cracks and holes that simulate the inspection of fasteners in aircraft structures, (iii) we carry out reliable inspections of surface and subsurface discontinuities, (iv) we study an alternative portable eddy current instrument, based on the lock-in amplifier …

    greece Repository record for Μελέτη διεγέρσεων στη χρήση μαγνητομέτρου SQUID με εφαρμογή σε μη καταστροφικούς ελέγχους (opens in a new tab)

  17. Characterising the fatigue response of corrugated roof cladding

    … including the various profiles, manufacturers, fasteners and fastener arrangements, must be tested multiple times. A greater understanding of the mechanism underlying fatigue of roof cladding in combination with a numerical model capable of simulating cladding fatigue could reduce the total …

    jamescook Download PDF for Characterising the fatigue response of corrugated roof cladding (opens in a new tab)

  18. The effects of water displacing corrosion preventatives on the fatigue behaviour of mechanically fastened aluminium joints

    … stress concentration factor at the edge of the hole is decreasing as clamping force increases. The rate of decrease of stress concentration factor is increasing as friction coefficient increases. While stress concentration factor on the faying surface is increasing as clamping force and friction …

    unsw Repository record for The effects of water displacing corrosion preventatives on the fatigue behaviour of mechanically fastened aluminium joints (opens in a new tab)