Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 435 for “"Fatigue Resistance"”.
-
Fatigue Resistance of Prestressed Concrete Beams
Made available in DSpace on 2014-12-13T19:31:47Z (GMT). No. of bitstreams: 1 7913440.pdf: 5005051 bytes, checksum: c139856fd175e8209a3abe2501fdef60 (MD5) Previous issue date: 1978
-
Advanced Tools For Characterizing HMA Fatigue Resistance
… loading for long periods of time and resist fatigue cracking. The Calibrated Mechanistic with Surface Energy (CMSE) method of design to preclude this primary type of distress requires that the HMA material be tested using the Relaxation Modulus (RM) and Repeated Direct Tension (RDT) tests to …
-
An Analysis of the Fatigue Resistance of Beta Titanium and the Effect of Spot-Welding Upon the Fatigue Resistance of this Alloy
This investigation was designed to establish a fatigue curve for beta titanium, determine the effect of spot-welding upon the fatigue resistance of this alloy, and provide qualitative observations about surface characteristics of different batches of TMA in relation to their fatigue lives. …
-
Investigation into the Fatigue Resistance of Natural Rubber Vulcanisates
The fatigue resistance of dicumyl peroxide (DCP) and conventional sulphur cured Natural Rubber (NR) vulcanisates have been investigated. The rubbers were examined both with and without hot acetone extraction under nitrogen, before and after vulcanisation. Extraction reduced the fatigue life of …
-
Retentive forces and fatigue resistance of thermoplastic resin clasps
Statement of problem: Thermoplastic resin clasps have been used recently in the partial removable dental prostheses construction. However, little is known about the long-term retentiveness of these clasps under clinical conditions. Objectives: The objective of this study was to evaluate the …
-
Combined torsional and cyclic fatigue resistance of rotary endodontic files
… testing that combines torsional and cyclic fatigue (CF) stresses simultaneously, aiming to evaluate the impact of torque at the tip of a rotary file on resistance. Fractographic analysis was performed on the fractured files to further understand the mode of failure. Size F2 ProTaper Ultimate …
-
Materials assessment and optimisation of aluminium alloys for fatigue resistance
<p>In quantifying the fatigue crack growth behaviour of a material, it is possible to identify intrinsic and extrinsic contributions to failure resistance, with intrinsic resistance representing the inherent mechanical and environmental material response to cyclic loading at the crack tip. The …
-
The Influence of Transcranial Alternating Current Stimulation on Fatigue Resistance
Fatigue is an exercise-induced reduction in muscle force generating capacity. Several studies have shown that some forms of non-invasive brain stimulation can increase the resistance to fatigue during sustained isometric contractions. The purpose was to determine the influence of transcranial …
-
Fatigue Resistance of Asphalt Mixtures Affected by Water Vapor Movement
… objective is to identify to which extent the fatigue crack growth of pavement would result from such moisture accumulation. To fulfill these two objectives, a diffusion model was first established to illustrate the wetting process of the surface asphalt layer due to the vapor migration from …
-
Fatigue resistance of plasma and gas carburized SAE 8719 steel
Includes bibliographical references.
-
High cycle (fatigue) resistance of reinforced concrete beams with lap splices
… when subjected to high cycle, low intensity (fatigue) loading. Also, recently proposed design equations for lap splices under static loading will permit shorter lap lengths. For these reasons, a study was initiated to investigate the fatigue resistance of reinforced concrete beams with lap …
-
Fracture Toughness and Fatigue Resistance of a Range of Sintered Steels
… and diluted maraging steel compacts have been fatigue tested in three point bending with two levels of notch root radii. The number of cycles to produce a detectable fatigue crack correlated well with an empirical parameter of the form ( ΔK/ p0.3), thereby minimising the banding effect, …
-
A Comparative Study of the Fatigue Resistance of Four Orthodontic Alloys
This investigation was designed to compare the fatigue resistance of four orthodontic alloys and to determine whether their surface characteristics had any influence on their fatigue lives. Stainless steel, Blue Elgiloy, TMA, and Nitinol were evaluated using a round (.018") and a rectangular (.016" …
-
Dependence of Strength on Corrosion-Fatigue Resistance of AISI 4130 Steel
… parts are suspected to exhibit poor corrosion-fatigue properties and be more susceptible to corrosion in general. In this study, the effect of strength level on the decrease in fatigue life of AISI 4130 steel when exposed to an aqueous salt solution is quantified. The observed mechanical …
-
Design criteria for rolling contact fatigue resistance in back-up rolls.
… mechanics model, for the rolling contact fatigue and spalling failure, has been quantified theoretically using published methods for determining the stress intensity factors at the tips of pressurised and water lubricated, inclined rolling contact fatigue cracks. The predictions of the …
-
Influence of cyclic torsional loading on the fatigue resistance of K3XF instruments.
Objective: To evaluate the torsional and cyclic fatigue behavior of post-machining heat-treated K3XF and conventional K3 nickel titanium (NiTi) instruments. Methodology: New K3XF and K3 files size 25/0.04 (n = 15) were tested in torsion and fatigue tests until fracture to determine the mean number …
-
Influence of Previous Angular Deformation on Cyclic Fatigue Resistance of K3XF Instruments
… of the maximum distortion angle on the cyclic fatigue resistance of post-machining heat-treated nickel-titanium (NiTi) instruments. Methodology: New K3XF and K3 NiTi instruments (size 25/.04 taper)( n = 15) were tested to obtain the mean number of cycles to failure (Nf) using a 3-point bending …
-
Hierarchical multifunctional cellular materials for implants with improved fatigue resistance and osteointegration
… is the impact of process-induced flaws on the fatigue behavior of components made of L-PBF lattices. Despite a growing body of scientific literature on the fatigue behavior of lattice unit cells, little attention has been given to the function of fatigue at a millimetric scale, specifically the …
Page 1 of 22