Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 129 for “"Fatigue crack initiation"”.

  1. Fatigue Crack Initiation from Stress Concentrations in Cast Steels

    … and low alloy cast steels were tested in fatigue in bending with machined notches of radii from 0.125 mm to 25.4 mm. The number of cycles to produce a detectable fatigue crack correlated well with both the range of stress intensity factor divided by the square root of the notch root radius …

    aston Repository record for Fatigue Crack Initiation from Stress Concentrations in Cast Steels (opens in a new tab) Download PDF for Fatigue Crack Initiation from Stress Concentrations in Cast Steels (opens in a new tab)

  2. Fatigue crack initiation in cross-ply carbon fiber laminates

    … of this research was to investigate the tensile fatigue behavior of a carbon fiber / epoxy composite material. Specifically, the stress levels at which cracks initiated in static and fatigue loading in the 90 degree plies of a "quasi-cross ply layup" [0/905]S was investigated. For layups which …

    gatech Repository record for Fatigue crack initiation in cross-ply carbon fiber laminates (opens in a new tab)

  3. Fatigue crack initiation and propagation from defects in aluminium welds

    Fatigue crack initiation and propagation in aluminium butt welds has been investigated. It is shown that the initiation of cracks from both buried defects and. from the weld reinforcement may be quantified by predictive laws based on either linear elastic fracture mechanics, or on Neuber's rule of …

    aston Download PDF for Fatigue crack initiation and propagation from defects in aluminium welds (opens in a new tab)

  4. Creep-fatigue Crack Initiation And Propagation Of A Notched Stainless Steel

    … turbines has led to a phenomenon known as creep-fatigue (CF). A coupling of two primary failure mechanisms in gas turbines, CF conditions exacerbate the mechanisms of creep and fatigue, ultimately leading to a premature failure of components. Traditionally, independent creep and fatigue analyses …

    ucf Repository record for Creep-fatigue Crack Initiation And Propagation Of A Notched Stainless Steel (opens in a new tab)

  5. A Model for Joining the Fatigue Crack Initiation and Propagation Analyses

    … analytical model for nonarbitrarily defining the crack initiation length (a(,I)) of a notched member on basis of the minimum total life estimate (Life-calculation method) is proposed. The crack initiation length (a(,I)) is not a fixed value, as usually assumed, but varies with stress level (or …

    uiuc Repository record for A Model for Joining the Fatigue Crack Initiation and Propagation Analyses (opens in a new tab)

  6. Fatigue Crack Initiation as a Function of Temperature and Strain Rate

    Made available in DSpace on 2014-12-12T00:25:56Z (GMT). No. of bitstreams: 1 7500438.pdf: 1914377 bytes, checksum: fd307c05d347ae8a2d053c0f9dc15893 (MD5) Previous issue date: 1974

    uiuc Repository record for Fatigue Crack Initiation as a Function of Temperature and Strain Rate (opens in a new tab)

  7. Mechanism of dwell fatigue crack initiation in Ti-7Al under biaxial tension-tension loads

    … for slip, and hard grains that are not. Dwell fatigue, where prolonged peak load is applied each cycle, is known to adversely affect life compared to regular cyclic fatigue for uniaxial loading. It is generally accepted that this dwell debit is due to load shedding between soft and hard grains …

    colo-mines Repository record for Mechanism of dwell fatigue crack initiation in Ti-7Al under biaxial tension-tension loads (opens in a new tab)

  8. Estimation of the Fatigue Crack Initiation Life in Welds Using Low Cycle Fatigue Concepts

    Made available in DSpace on 2014-12-14T16:00:30Z (GMT). No. of bitstreams: 1 7616163.pdf: 6125831 bytes, checksum: fc4d671b185ce7bbb03b392488cf016a (MD5) Previous issue date: 1976

    uiuc Repository record for Estimation of the Fatigue Crack Initiation Life in Welds Using Low Cycle Fatigue Concepts (opens in a new tab)

  9. Estimating Fatigue Crack Initiation and Propagation Lives in Notched Plates Under Variable Loading Histories

    Made available in DSpace on 2014-12-14T14:42:12Z (GMT). No. of bitstreams: 1 7726754.pdf: 2508518 bytes, checksum: bd01021ee1432353645ab7bae6a7320f (MD5) Previous issue date: 1977

    uiuc Repository record for Estimating Fatigue Crack Initiation and Propagation Lives in Notched Plates Under Variable Loading Histories (opens in a new tab)

  10. THE EFFECT OF POROSITY ON FATIGUE CRACK INITIATION AND PROPAGATION IN AM60 DIE-CAST MAGNESIUM ALLOY

    … impairs mechanical properties, especially fatigue properties, and thus affects the product reliability. We have therefore studied the effect of porosity on the fatigue behavior of samples drawn from a prototype AM60 shock tower by conducting strain-controlled fatigue test along with X-ray …

    mcmaster Repository record for THE EFFECT OF POROSITY ON FATIGUE CRACK INITIATION AND PROPAGATION IN AM60 DIE-CAST MAGNESIUM ALLOY (opens in a new tab)

  11. Physically-based models for elevated temperature low cycle fatigue crack initiation and growth in Rene 88DT

    … able to accurately predict the high temperature crack initiation behavior of Rene 88DT, a commonly used aircraft engine disk material, under low cycle fatigue (LCF) conditions. Two different microstructural conditions were produced by subjecting the material to two separate heat treatments; the …

    gatech Repository record for Physically-based models for elevated temperature low cycle fatigue crack initiation and growth in Rene 88DT (opens in a new tab)

  12. An investigation of elevated temperature fatigue crack initiation in 2 1/4 Cr-1 Mo low alloy steel

    Environmental effects in elevated temperature fatigue have teen extensively studied and reported in the literature for 2 1/4 Cr-1 Mo steel. The results of cycles to failure (lumped initiation and propagation life) verses strain range have shown drastic reductions in fatigue life with a dwell period …

    nps Repository record for An investigation of elevated temperature fatigue crack initiation in 2 1/4 Cr-1 Mo low alloy steel (opens in a new tab)

  13. Study of fatigue crack initiation and propagation mechanisms in a directionally solidified superalloy: Effects of microstructure, anisotropy and oxidation

    … single crystal (SX) superalloys. Studies on the fatigue behaviour, particularly the interplay between microstructure, oxidation, creep and fatigue at more moderate elevated temperatures (i.e. typical of those seen at stress concentration features like the blade root or at cooling holes) are …

    soton Download PDF for Study of fatigue crack initiation and propagation mechanisms in a directionally solidified superalloy: Effects of microstructure, anisotropy and oxidation (opens in a new tab)

Page 1 of 7