Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 518 for “"Fatigue damage"”.

  1. Impact fatigue damage in CFRP

    … impacts that result in barely visible impact damage (BVID) can threaten the laminate structural integrity and are hard to detect. The polymer matrix is also especially susceptible to environmental conditions such as humidity and moisture uptake. To date, no study is currently available on the …

    colo-mines Repository record for Impact fatigue damage in CFRP (opens in a new tab)

  2. Thermography Detection on the Fatigue Damage

    … methods to <em>in-situ</em> “watch” the material fatigue-damage processes so that in-time reparations will be possible, and failures or losses can be minimized to the maximum extent. Realizing that temperature patterns may serve as fingerprints for stress-strain behaviors of materials, a …

    utk-theses Repository record for Thermography Detection on the Fatigue Damage (opens in a new tab)

  3. Micromechanical Simulation for Fatigue Damage Incubation

    … attributes to the formation of small fatigue cracks. Three wrought aluminum alloys (7075-T651, 2024-T3, virtual material) with fractured particle are studied to quantify the influence of material’s yield strength and ultimate strength to material’s fatigue resistance. Laser Engineered …

    utahstate Repository record for Micromechanical Simulation for Fatigue Damage Incubation (opens in a new tab)

  4. Fatigue damage propagation in graphite/epoxy composites

    … to determine the increase in the crack length or fatigue damage of graphite/epoxy composites under tension-tension fatigue using traveling microscope, tetrabromoethane enhanced radiography and compliance techniques. Hercules As/3501-6 graphite fibre/epoxy prepreg was used to produce laminates …

    ubc Repository record for Fatigue damage propagation in graphite/epoxy composites (opens in a new tab) Download PDF for Fatigue damage propagation in graphite/epoxy composites (opens in a new tab)

  5. Fatigue damage accumulation in nickel base superalloys.

    … of a turbine disc were subjected to low cycle fatigue in the form of cyclic four point bend tests. Substantial differences in grain size and structure occurred across the section of the disc. Fatigue damage occurred primarily as a result of persistent slip band formation, cell formation, Orowan …

    whiterose Download PDF for Fatigue damage accumulation in nickel base superalloys. (opens in a new tab)

  6. On Cumulative Fatigue Damage in Seismic Structures

    Made available in DSpace on 2014-12-10T22:21:48Z (GMT). No. of bitstreams: 1 7212402.pdf: 7648637 bytes, checksum: 7e6ef70a149b116a898fd31df299fd6e (MD5) Previous issue date: 1971

    uiuc Repository record for On Cumulative Fatigue Damage in Seismic Structures (opens in a new tab)

  7. Peridynamic modelling of fatigue damage in polycrystalline materials

    … of the most important ones to be considered is fatigue fracture. Although many studies have carried out on macroscopic point of view, only few studies are focus on crystal level. The main objective of this study is to find an alternative way to simulate microscopic fatigue cracks. Engineers have …

    strathclyde Repository record for Peridynamic modelling of fatigue damage in polycrystalline materials (opens in a new tab)

  8. FATIGUE DAMAGE ANALYSIS OF REINFORCED CONCRETE STRUCTURAL ELEMENTS

    ABSTRACT The design of fatigue-prone structural elements such as wind turbine foundations requires adequate verification of the constituent materials to ascertain their resistance capacity under fatigue loading. Hence, the number of loading cycles that can be sustained in service using stress-life …

    toronto-retro Repository record for FATIGUE DAMAGE ANALYSIS OF REINFORCED CONCRETE STRUCTURAL ELEMENTS (opens in a new tab)

  9. Drilling Induced Fatigue Damage in Ti-6Al-4V

    … between hole drilling processes and the fatigue performance of the resulting part in Ti-6Al-4V. This problem is significant, as on the order of one-hundred thousand to a million holes are created in a typical large aircraft, and the limiting performance criterion is usually the fatigue …

    wustl Repository record for Drilling Induced Fatigue Damage in Ti-6Al-4V (opens in a new tab)

  10. Entropic Approaches for Assessment of Metal Fatigue Damage

    … and aging. However, traditional methods of fatigue life estimation have a restriction to apply to PHM due to scale dependency of measurements. An alternative to the conventional fatigue assessment is the entropic approach, initially de-rived from the second law of thermodynamics. The …

    maryland Repository record for Entropic Approaches for Assessment of Metal Fatigue Damage (opens in a new tab)

  11. Molecular dynamics simulation of fatigue damage in metals

    … conducted to better understand the mechanism of fatigue failure and to identify a parameter(s) that can indicated progressive damage due to cyclic loading. The Embedded Atom Method (EAM) was used for copper atoms subjected to cyclic loadings. Defective crystal structures including vacancies or …

    nps Repository record for Molecular dynamics simulation of fatigue damage in metals (opens in a new tab)

  12. Low-cycle fatigue damage in HY-80 steel

    nps Repository record for Low-cycle fatigue damage in HY-80 steel (opens in a new tab)

  13. Cumulative fatigue damage of plain concrete in compression

    … prismatic specimens to study the cumulative fatigue damage of plain concrete subjected to constant and variable amplitude cyclic compressive stresses. Pulse velocity measurements and strain characteristics were used to indicate the extent of progressive fatigue damage. At a given percentage …

    whiterose Download PDF for Cumulative fatigue damage of plain concrete in compression (opens in a new tab)

  14. Fatigue damage accumulation in titanium alloy IMI 834.

    … of stress and temperature, the hazard of fatigue failure becomes more acute. Engineers utilise the methodology of fracture mechanics to estimate fatigue crack growth rates but fatigue crack initiation, which involves the interplay of many microprocesses, is only investigated empirically. …

    whiterose Download PDF for Fatigue damage accumulation in titanium alloy IMI 834. (opens in a new tab)

  15. Metallurgical Studies of Fatigue Damage in Maraging Steel

    Made available in DSpace on 2014-12-10T17:57:49Z (GMT). No. of bitstreams: 1 6711866.pdf: 4658539 bytes, checksum: d77294e41db3c68c53917c8f926eca5c (MD5) Previous issue date: 1967

    uiuc Repository record for Metallurgical Studies of Fatigue Damage in Maraging Steel (opens in a new tab)

  16. ULTRASONIC MEASUREMENTS FOR THE EVALUATION OF THERMAL FATIGUE DAMAGE

    … of ultrasonic measurements to measure thermal fatigue damage in composite material systems. The ultrasonic test system used a modification of the sing-around technique. The sample to be studied was placed between a transmitting and a receiving transducer, and the time between the first peak on …

    sask Repository record for ULTRASONIC MEASUREMENTS FOR THE EVALUATION OF THERMAL FATIGUE DAMAGE (opens in a new tab)

  17. Fatigue Damage in a WC-Nickel Cemented Carbide Composite

    … bulk behavior were observed. On a local scale, fatigue effects on dislocation density and structure were found in the binder phase by transmission electron microscopy. As cyclic stress levels were raised, favorably oriented grain-boundary-ledge dislocation sources were activated, leading to …

    rice Repository record for Fatigue Damage in a WC-Nickel Cemented Carbide Composite (opens in a new tab)

Page 1 of 26