Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 99 for “"Fatigue model"”.

  1. A fatigue model for thermite rail welds

    The objective of this project was to examine the fatigue behavior of thermite-welded railroad rail and in particular the occurrence of fatigue defects in the rail head. A rail-head local-stress fatigue model (RAHELS) was developed to predict the type of rail-head defect that forms under a given set …

    uiuc Repository record for A fatigue model for thermite rail welds (opens in a new tab)

  2. Verification of the dissipated energy based fatigue model using field data

    … be limited to below a certain value known as the fatigue endurance limit (FEL). In this thesis, a method for estimating the allowable strain in the asphalt layers of flexible airfield pavements is proposed based on the concept that HMA fatigue failure is associated with a significant reduction in …

    rowan Repository record for Verification of the dissipated energy based fatigue model using field data (opens in a new tab)

  3. Physics - based Thermo - Mechanical Fatigue Model for Life Prediction of High Temperature Alloys

    … theory to finite element software for fatigue life prediction. Therefore, the goal of this research is to develop a procedure to implement unified viscoplasticity theory in finite element (FE) model to model the complex material deformation pertaining to thermomechanical load and …

    iupui Repository record for Physics - based Thermo - Mechanical Fatigue Model for Life Prediction of High Temperature Alloys (opens in a new tab)

  4. Development of corrosion resistant coatings for Mg alloys and a general corrosion fatigue model

    … of this work is the development of corrosion fatigue model suitable for Mg alloys. First, after reviewing various surface treatment methods available for Mg alloys in literature Mn-P conversion coating was chosen to treat cast Mg alloy AZ31B for corrosion protection and surface protection. The …

    waterloo Repository record for Development of corrosion resistant coatings for Mg alloys and a general corrosion fatigue model (opens in a new tab)

  5. Peridynamic analysis of fatigue crack growth in fillet welded joints

    Fatigue assessment is one of the significant factors to be considered for a design life of structure and estimation of structural reliability during operation. Especially, for welded structures, various welding effects, such as stress concentration, residual stresses, weld geometry and weld …

    strathclyde Repository record for Peridynamic analysis of fatigue crack growth in fillet welded joints (opens in a new tab)

  6. A method for the fatigue evaluation of riveted steel girder railway bridges

    … railway bridges may last, a new method for fatigue evaluation has been developed. A large-scale instrumentation program was begun in 1988 with the goal of collecting loading and response spectra for typical riveted girder railway bridges. The collected data were used to develop the new …

    uiuc Repository record for A method for the fatigue evaluation of riveted steel girder railway bridges (opens in a new tab)

  7. A methodology for numerical fatigue analysis of carbon fiber reinforced plastics

    … development of a non-linear, energy dependent fatigue damage model for carbon fiber reinforced plastics (CFRPs). To achieve this task, the fatigue behavior of carbon fiber reinforced plastics was investigated using online stiffness measurments.<br>Existing quasi-static and fatigue models were …

    freiburg-diss Repository record for A methodology for numerical fatigue analysis of carbon fiber reinforced plastics (opens in a new tab)

  8. Flexural Fatigue Behavior of Fiber-reinforced Concrete Based on Dissipated Energy Modeling

    After a century of study of fatigue phenomena in concrete, most of the proposed models for predicting the fatigue life of concrete are not sufficiently precise. The traditional models for predicting fatigue life of concrete are only based on the strength-related parameters such as stress level. The …

    maryland Repository record for Flexural Fatigue Behavior of Fiber-reinforced Concrete Based on Dissipated Energy Modeling (opens in a new tab)

  9. Inference and Updating of Probabilistic Structural Life Prediction Models

    … levels of structural failure risk. Probabilistic fatigue models enable estimation of the likelihood of fatigue failure. A key step in the development of these models is the accurate inference of the probability distributions for dominant parameters. Since data sets for these inferences are of …

    gatech Repository record for Inference and Updating of Probabilistic Structural Life Prediction Models (opens in a new tab)

  10. AN ANALYTICAL APPROACH FOR FATIGUE LIFE ESTIMATION OF COPPER TRACES FOR DESIGN OPTIMIZATION IN ELECTRONIC ASSEMBLIES

    … trace strain, to develop a set of compatible fatigue model constants that best fit the failure behavior observed in the tests. Experimental studies were also conducted in order to determine the impact of assembly variations on the trace fatigue failures including the presence of a surface …

    maryland Repository record for AN ANALYTICAL APPROACH FOR FATIGUE LIFE ESTIMATION OF COPPER TRACES FOR DESIGN OPTIMIZATION IN ELECTRONIC ASSEMBLIES (opens in a new tab)

  11. DEVELOPMENT OF FATIGUE MODELS FOR COPPER TRACES ON PRINTED WIRING ASSEMBLIES UNDER QUASI-STATIC CYCLIC MECHANICAL BENDING

    This dissertation investigates the fatigue durability of copper (Cu) traces on printed wiring assemblies (PWAs) under quasi-static cyclic mechanical flexure, using experimental results from a set of three-point bending fatigue tests, finite element (FE) modeling of the stresses generated during the …

    maryland Repository record for DEVELOPMENT OF FATIGUE MODELS FOR COPPER TRACES ON PRINTED WIRING ASSEMBLIES UNDER QUASI-STATIC CYCLIC MECHANICAL BENDING (opens in a new tab)

  12. Defining structurally acceptable mechanical properties of high-strength reinforcing steel bars through low-cycle fatigue testing

    Low-cycle fatigue tests were performed on high-strength reinforcing bars currently being developed in the United States, to quantify mechanical properties and fatigue life under simulated seismic conditions. Reinforcing bars with yield strengths ranging for about 60ksi to over 100ksi were tested. …

    texas Repository record for Defining structurally acceptable mechanical properties of high-strength reinforcing steel bars through low-cycle fatigue testing (opens in a new tab)

  13. Performance Evaluation and Development of Mechanistic Empirical Pavement Design Procedure of Thin RCC Pavements

    … 4 to 6 in.) would eventually exhibit structural fatigue cracking failure under the repetitive traffic and environmental loading. The data also indicated that the more substantial base support generally provided additional structural capacity as compared the less substantial cement treated soil …

    lsu-thes Repository record for Performance Evaluation and Development of Mechanistic Empirical Pavement Design Procedure of Thin RCC Pavements (opens in a new tab)

  14. A Feasibility Study on EVA Fatigue Mitigation Using 3D Motion Capture and Biomechanical Simulations

    … it places astronauts at high risk of shoulder fatigue and injury due to the restrictive torques imposed by the Extravehicular Mobility Unit (EMU). Existing ergonomic guidelines do not adequately capture the combined effects of partial gravity, suit torque, and individual anthropometry on …

    tamu Repository record for A Feasibility Study on EVA Fatigue Mitigation Using 3D Motion Capture and Biomechanical Simulations (opens in a new tab) Embargoed until 2027-12-01

  15. A Feasibility Study on EVA Fatigue Mitigation Using 3D Motion Capture and Biomechanical Simulations

    … it places astronauts at high risk of shoulder fatigue and injury due to the restrictive torques imposed by the Extravehicular Mobility Unit (EMU). Existing ergonomic guidelines do not adequately capture the combined effects of partial gravity, suit torque, and individual anthropometry on …

    tamu Repository record for A Feasibility Study on EVA Fatigue Mitigation Using 3D Motion Capture and Biomechanical Simulations (opens in a new tab) Embargoed until 2027-12-01

  16. A Feasibility Study on EVA Fatigue Mitigation Using 3D Motion Capture and Biomechanical Simulations

    … it places astronauts at high risk of shoulder fatigue and injury due to the restrictive torques imposed by the Extravehicular Mobility Unit (EMU). Existing ergonomic guidelines do not adequately capture the combined effects of partial gravity, suit torque, and individual anthropometry on …

    tamu Repository record for A Feasibility Study on EVA Fatigue Mitigation Using 3D Motion Capture and Biomechanical Simulations (opens in a new tab) Embargoed until 2027-12-01

  17. A Feasibility Study on EVA Fatigue Mitigation Using 3D Motion Capture and Biomechanical Simulations

    … it places astronauts at high risk of shoulder fatigue and injury due to the restrictive torques imposed by the Extravehicular Mobility Unit (EMU). Existing ergonomic guidelines do not adequately capture the combined effects of partial gravity, suit torque, and individual anthropometry on …

    tamu Repository record for A Feasibility Study on EVA Fatigue Mitigation Using 3D Motion Capture and Biomechanical Simulations (opens in a new tab) Embargoed until 2027-12-01

  18. Effects Of Stress Ratios On Polymer Composite Fatigue

    In this work, fatigue behavior of glass fiber composite has been being investigated at different stress ratios and compared them with some previous model from literature. Ten layers of unidirectional glass fibers are used. Glass fibers and resin were supplied by LM Wind Power, a leading …

    nodak Repository record for Effects Of Stress Ratios On Polymer Composite Fatigue (opens in a new tab)

  19. Multi-Scale Fatigue Damage Life Assessment of a Railway Wheel Using a Critical-Plane Model

    A 3D finite element model is constructed in ABAQUS® to simulate the stress/strain fields that take place under the rolling-contact of railway wheels on rails. This FE model constitutes a faithful replica of a railway wheel that is rolled on a rail segment using a hard-contact over-closure …

    tamu Repository record for Multi-Scale Fatigue Damage Life Assessment of a Railway Wheel Using a Critical-Plane Model (opens in a new tab)

  20. A COMPARISON OF COMPOSITE MATERIAL FAILURE UNDER CYCLIC AND BLOCK AMPLITUDE LOADING

    … A universal failure criteria and predictive fatigue model have been proposed to predict composite failure. The goal of this study was to further validate and refine the predictive failure model. This study subjected notched quasi-isotropic GFC and cross-ply samples to cyclic loading at …

    nps Repository record for A COMPARISON OF COMPOSITE MATERIAL FAILURE UNDER CYCLIC AND BLOCK AMPLITUDE LOADING (opens in a new tab)

Page 1 of 5