Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 251 for “"Fatigue test"”.

  1. New Fatigue Test Method for Evaluating the Performance of Adhesive Bonded Joints

    … Therefore, an understanding of the effect of fatigue and environmental conditions on the performance of adhesive joints, at the design stage, are considered critical parameters for reliable joint design. Whilst it is recognized that fatigue is responsible for a significant number of failures …

    oxford-brookes Repository record for New Fatigue Test Method for Evaluating the Performance of Adhesive Bonded Joints (opens in a new tab) Embargoed until 2029-03-12

  2. Development of a fast and cost-effective asphalt mixture fatigue test system

    Fatigue cracking is one of the critical distress modes in asphalt pavements. Accurate prediction and evaluation of fatigue performance are crucial to extending the service life of asphalt mixtures. Naturally, laboratory testing methods for fatigue characterization are time-consuming and require …

    msu Repository record for Development of a fast and cost-effective asphalt mixture fatigue test system (opens in a new tab)

  3. Fatigue Test and Prognosis Study of Welded Tubular Joints in Signal Support Structures

    … reasons. However, they are susceptible to fatigue cracking which may lead to structural failure such as collapse, thus pose a threat to driver's safety. To address this issue, this study is focused on fatigue test, modeling and prognosis of the fatigue crack growth in full-scale welded …

    maryland Repository record for Fatigue Test and Prognosis Study of Welded Tubular Joints in Signal Support Structures (opens in a new tab)

  4. Enhancing Mechanical Engineering Education Through a Virtual Instructor in an Ai-Driven Virtual Reality Fatigue Test Lab

    This thesis demonstrates the combination of virtual reality (VR) and artificial intelligence (AI) specifically exploring the practical application of Natural Language Processing (NLP) and GPT-based models in educational VR laboratories. The objective is to design a comprehensive learning …

    iupui Repository record for Enhancing Mechanical Engineering Education Through a Virtual Instructor in an Ai-Driven Virtual Reality Fatigue Test Lab (opens in a new tab)

  5. Fatigue Test for Determining the Isothermal Cyclic Stress-Strain Response of Solder Joints on a Circuit Board

    A new test method for analyzing the isothermal low cycle fatigue experienced in a solder joint on a circuit board has been developed. This new test method simulates the strains that a solder joint experiences during temperature cycling by mechanically cycling test boards with rectangular copper …

    marquette Repository record for Fatigue Test for Determining the Isothermal Cyclic Stress-Strain Response of Solder Joints on a Circuit Board (opens in a new tab)

  6. FEA ANALYSIS AND OPTIMIZATION OF DIFFERENTIAL HOUSING FOR FATIGUE STRESSES AND FATIGUE TEST DESIGN TO STUDY SKIN EFFECT IN DUCTILE IRON

    … more than 90% of design failures are due to fatigue loading rather than static stress failure. The differential design was already optimized using the high Si ductile iron for static stresses by the work done by Mr. Parag Deshpande (Deshpande 2016) and Mr. Pankaj Kalan (Kalan 2016) in this …

    mtu Repository record for FEA ANALYSIS AND OPTIMIZATION OF DIFFERENTIAL HOUSING FOR FATIGUE STRESSES AND FATIGUE TEST DESIGN TO STUDY SKIN EFFECT IN DUCTILE IRON (opens in a new tab)

  7. Analysis of force parameters used to assess the fatigability of mammalian motor units.

    … models has been dominated by a single fatigue test, one fatigue index, and an emphasis on changes in the magnitude of (usually peak) force. Although the standard fatigue test has been reported to elicit changes in the dynamic phases of an isometric tetanus, this has not been …

    arizona-thes Repository record for Analysis of force parameters used to assess the fatigability of mammalian motor units. (opens in a new tab)

  8. The development and application of the load-stroke hysteresis technique for evaluating fatigue damage development in composite materials

    … to measure the hysteresis loss during a fatigue test from the load and stroke signals of a standard servo-hydraulic materials testing system. The method was used to characterize changes in properties and performance induced by long-term cyclic loading. Advantages of the load-stroke …

    vt Repository record for The development and application of the load-stroke hysteresis technique for evaluating fatigue damage development in composite materials (opens in a new tab)

  9. A micro-scale method to associate the fatigue properties of asphalt binder, mastic and mixture

    The fatigue damage is one of the most common distresses observed on the asphalt concrete pavement. The initiation and propagation of the fatigue damage is a complicated phenomenon and very difficult to detect. In order to thoroughly understand the fatigue of asphalt concrete, the behaviors of the …

    vt Repository record for A micro-scale method to associate the fatigue properties of asphalt binder, mastic and mixture (opens in a new tab)

  10. Fatigue response of pretensioned concrete beams

    … inspections. This thesis reviews strand fatigue test results as well as fatigue test results of prestressed beams from past experiments. Test results of four new prestressed beam fatigue tests are reported and analyzed. Finally, a recommendation is made that beam fatigue analysis should …

    nps Repository record for Fatigue response of pretensioned concrete beams (opens in a new tab)

  11. Effect of surface treatment and fatigue on retention strength of titanium abutment to zirconia

    … was to compare effect of surface treatment and fatigue to the retention of zirconia crowns luted to two different heights of titanium abutments. Thirty titanium base 3.5 mm (n = 15) and 5.5 mm in height (n = 15) and thirty zirconia crowns were used. Group A (n = 10), 3.5-mm-height titanium base …

    bu Repository record for Effect of surface treatment and fatigue on retention strength of titanium abutment to zirconia (opens in a new tab)

  12. Accelerating the fatigue life characterization of composite sailplane structures - a novel approach

    … certification are based on full scale structural testing of the aircraft's wing. Two accepted test procedures exist, namely a static test to an elevated load level and a fatigue test simulating actual flight loads. Both these methods have their limitations. The static test procedure has a …

    nwu-za Repository record for Accelerating the fatigue life characterization of composite sailplane structures - a novel approach (opens in a new tab)

  13. FATIGUE CRACK MONITORING WITH COUPLED PIEZOELECTRIC FILM ACOUSTIC EMISSION SENSORS

    Fatigue-induced cracking is a commonly seen problem in civil infrastructures reaching their original design life. A number of high-profile accidents have been reported in the past that involved fatigue damage in structures. Such incidences often happen without prior warnings due to lack of proper …

    maryland Repository record for FATIGUE CRACK MONITORING WITH COUPLED PIEZOELECTRIC FILM ACOUSTIC EMISSION SENSORS (opens in a new tab)

  14. The task at hand: fatigue-associated changes to corticospinal excitability during writing

    … during writing. Each day consisted of a pre-fatigue test where participants performed the designated task and corticospinal excitability was measured, a fatiguing task, and a post-fatigue test which was identical to the pre-fatigue test. There was a main effect of task on SICI, such that we …

    wilfrid-laurier Repository record for The task at hand: fatigue-associated changes to corticospinal excitability during writing (opens in a new tab) Download PDF for The task at hand: fatigue-associated changes to corticospinal excitability during writing (opens in a new tab)

  15. A study of fatigue failure in vulcanized rubber

    Some aspects of fatigue failure in rubbers have been examined. Scanning electron micrographs of the surface exposed by the failure confirm the incremental, crack-propagation nature, of the fatigue process. Many other features of the failure surface have been identified and related to this process. …

    aston Download PDF for A study of fatigue failure in vulcanized rubber (opens in a new tab)

  16. The effects of a six-week open kinetic chain/closed kinetic chain and open kinetic chain/closed kinetic chain/core stability strengthening program in baseball.

    … Closed Kinetic Chain Upper Extremity Stability Test, Back Extensor Test, 45˚ Abdominal Fatigue Test, Right Side Bridging Test, and Left Side Bridging Test. Setting: At a Division III college in western Pennsylvania. Patients and Other Participants: Subjects consisted of 19 healthy baseball …

    wvu Repository record for The effects of a six-week open kinetic chain/closed kinetic chain and open kinetic chain/closed kinetic chain/core stability strengthening program in baseball. (opens in a new tab)

  17. Evaluation of Cracking Behavior of Cold In-Place Recycling Asphalt Mixtures

    … properties of CIR by means of the Overlay Tester (OT) and the Flexural Beam Fatigue Test. The results indicated that CIR materials have good (low) crack propagation rates but the required energy to initiate a crack is low as well. In addition, some flexibility was observed in the Beam …

    unr Repository record for Evaluation of Cracking Behavior of Cold In-Place Recycling Asphalt Mixtures (opens in a new tab)

  18. Investigation of the Load-Induced Cracking and Rutting Performance of Specialty Hot Mix Asphalt Overlay Mixtures

    … of the mixtures were assessed using the overlay test, the dynamic modulus test, uniaxial cyclic fatigue test, bending beam fatigue test, and asphalt pavement analyzer test. The field reflection cracking performance of the HMA overlay mixtures were assessed by performing accelerated pavement …

    rowan Repository record for Investigation of the Load-Induced Cracking and Rutting Performance of Specialty Hot Mix Asphalt Overlay Mixtures (opens in a new tab)

  19. Further Development of the Total Fatigue Life Model for Weldments and Its Application to Fatigue Design

    Cruciform joints were fatigue tested under SAE Bracket variable loading history. Tube-to-plate welds were fatigue tested under bending and torsion loading conditions. Fatigue test results were compared with predictions made using the total fatigue life model which predicts the total fatigue life of …

    uiuc Repository record for Further Development of the Total Fatigue Life Model for Weldments and Its Application to Fatigue Design (opens in a new tab)

Page 1 of 13