Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 184 for “"Fault current"”.

  1. Fault current generation by STATCOM

    … energy resources are not required, by the current grid codes, to contribute to restore the voltage stability. Moreover, they do not contribute to the short circuit current during fault disturbance. As a consequence, the reliability as well as the voltage stability of the power grid have …

    chalmers Repository record for Fault current generation by STATCOM (opens in a new tab)

  2. Resonance-Based Series Compensating Fault Current Limiters

    … research explores the functionality of resonant fault current limiting and series compensators. Being a variable impedance from both amplitude and phase point of view enables a series or parallel type resonate circuit to be suitable for various applications from power quality to power system …

    gatech Repository record for Resonance-Based Series Compensating Fault Current Limiters (opens in a new tab)

  3. Power System - Fault Clearance with Limited Fault Current

    … technical challenges, particularly in fault current management. This thesis explores the evolving challenges and solutions in power system protection as the share of converter interfaced generators continues to grow in response to global ambitions for reducing greenhouse gas emissions. …

    chalmers Repository record for Power System - Fault Clearance with Limited Fault Current (opens in a new tab)

  4. Distribution fault location using short-circuit fault current profile approach

    … used impedance-based methods need voltage and current waveform as well as line impedance per unit length to estimate distance to fault location. For a non-homogenous system with different line configuration, these methods assume that the system is homogenous and use the line impedance of the …

    texas Repository record for Distribution fault location using short-circuit fault current profile approach (opens in a new tab)

  5. Permanent Magnet Fault Current Limiters for Electrical Power Protection Systems

    … work is to design and test a permanent magnet fault current limiter (PMFCL) to limit the fault current in electrical power system network. The (fit and forget) device presented in this thesis is based on two important aspects; the best selection of the state of the art soft and hard magnetic …

    sheffield-hallam Repository record for Permanent Magnet Fault Current Limiters for Electrical Power Protection Systems (opens in a new tab) Download PDF for Permanent Magnet Fault Current Limiters for Electrical Power Protection Systems (opens in a new tab)

  6. DC Fault Current Analysis and Control for Modular Multilevel Converters

    … distributed energy storage, and near ideal current and voltage scalability. The fault response, on the other hand, is a big challenge for the MVDC distribution systems and the traditional MMCs with the Half-Bridge submodule configuration, especially when a DC short circuit fault happens. In …

    vt Repository record for DC Fault Current Analysis and Control for Modular Multilevel Converters (opens in a new tab)

  7. Fault Current Management in Power Systems using Inverter Based Distributed Generators

    … in power systems can be observed during a fault, when the additional DG fault current violates the original settings of protection systems. Protective devices installed in the system are designed based on the fault current analysis performed for the original system without DGs. When DGs are …

    waterloo Repository record for Fault Current Management in Power Systems using Inverter Based Distributed Generators (opens in a new tab)

  8. Specification, Placement, and Control of Fault Current Limiters In Power Systems

    This dissertation focuses on the application of fault current limiters (FCLs) in power systems. The formula for the maximum first-peak fault current is derived to assist in specifying inductive FCLs. The specification process can be used to design and select proper FCL devices in a particular power …

    south-carolina Repository record for Specification, Placement, and Control of Fault Current Limiters In Power Systems (opens in a new tab)

  9. A comprehensive overview, behavioral model and simulation of a Fault Current Limiter

    … distribution system, a higher operating current state leading to increased fault current levels is attained. Hence, the relay co-ordination is disturbed and equipments such as feeders and circuit breakers need to be replaced with higher rating so that they can handle the new currents …

    vt Repository record for A comprehensive overview, behavioral model and simulation of a Fault Current Limiter (opens in a new tab)

  10. Fault current limiting and protection circuit for power electronics used in a Modular Converter

    … used in modular converter applications. A new fault current limiting and protection circuit is proposed. The system level fault mitigation assemblies take a long time to remove a fault and within this time the IGBTs used in the Flexible AC Transmission System (FACTS) application will undergo …

    ut-knoxville Repository record for Fault current limiting and protection circuit for power electronics used in a Modular Converter (opens in a new tab)

  11. Impact Of Fault Current Limiters And Demand Response On Electric Utility Asset Management Programs

    Over-currents are known to be the dominant cause of power system component failures or deterioration from full functionality. Some of these effects may remain unknown and could later result in catastrophic failures of the entire or large portions of the system. There are plenty of devices/methods …

    nodak Repository record for Impact Of Fault Current Limiters And Demand Response On Electric Utility Asset Management Programs (opens in a new tab)

  12. A Silicon Carbide Based Solid-State Fault Current Limiter for Modern Power Distribution Systems

    The fault current limiter represents a developing technology which will greatly improve the reliability and stability of the power grid. By reducing the magnitude of fault currents in distribution systems, fault current limiters can alleviate much of the damage imposed by these events. Solid-state …

    arkansas Repository record for A Silicon Carbide Based Solid-State Fault Current Limiter for Modern Power Distribution Systems (opens in a new tab)

  13. The analysis and application of resistive superconducting fault current limiters in present and fututre power systems

    Fault current levels in electrical systems are rising due to natural growth in demand, the increasing presence of distributed generation (DG), and increased network interconnection. This rising trend is expected to continue in the future. Marine vessel power systems are highly power-dense and are …

    strathclyde Repository record for The analysis and application of resistive superconducting fault current limiters in present and fututre power systems (opens in a new tab)

Page 1 of 10