Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"Fault current limiter"”.
-
A comprehensive overview, behavioral model and simulation of a Fault Current Limiter
… distribution system, a higher operating current state leading to increased fault current levels is attained. Hence, the relay co-ordination is disturbed and equipments such as feeders and circuit breakers need to be replaced with higher rating so that they can handle the new currents …
-
A Silicon Carbide Based Solid-State Fault Current Limiter for Modern Power Distribution Systems
The fault current limiter represents a developing technology which will greatly improve the reliability and stability of the power grid. By reducing the magnitude of fault currents in distribution systems, fault current limiters can alleviate much of the damage imposed by these events. Solid-state …
-
Stability enhancement of power system with large-scale grid-connected wind farm and PV system by superconducting fault current limiter
… problems on the grid, such as an increase of fault current level and a decrease of system inertia, which will affect negatively on the power systems stability. In this thesis, I suggest the utilization of a SFCL (superconducting fault current limiter) to improve the power system stability and …
-
Resonance-Based Series Compensating Fault Current Limiters
… research explores the functionality of resonant fault current limiting and series compensators. Being a variable impedance from both amplitude and phase point of view enables a series or parallel type resonate circuit to be suitable for various applications from power quality to power system …
-
Studies of fault current limiters for power systems protection : a project report submitted in partial fulfilment of the requirements for the degree of Master of Engineering in Information and Telecommunication Engineering, Institute of Information Sciences and Technology, Massey University, Palmerston North, New Zealand
… energy leads to increase in the system fault levels. It is not possible to change the rating of the equipment and devices in the system or circuits to accommodate the increasing fault currents. The devices in electronic and electrical circuits are sensitive to disturbance and any …
-
An Analysis on Wildfire Mitigations Employed by Utilities in California
… evaluated are covered conductor, rapid earth fault current limiter, distribution fault analysis, and early fault detection. Each of these mitigate different failure drivers of utility lines, whether it is due to a contact from a foreign object, an equipment failure, or another driver. Because …
-
Modeling and Characterization of P-Type Silicon Carbide Gate Turn off Thyristors
… is being used as part of a SiC-based solid-state fault current limiter under development at the University of Arkansas' National Center for Reliable Electric Power Transmission. The developed model is a level-3 physics-based model, that predicts on-state and switching behavior with high fidelity. …
-
Modeling, Design, and Control of Heterogeneous Inverter-Based Power Distribution Networks with High DER Penetration
… each order of harmonics of grid-connected current. Moreover, to further reduce the computation burden caused by repetitive usage of the mathematical HSS model during the optimal design process, a data-driven HSS (D-HSS) modeling method is proposed by incorporating the data-driven techniques …
-
Protection of modern distribution systems
… loads. Protective devices typically use are overcurrent relays, autoreclosers, fuses, and circuit breakers. However, these protective schemes may no longer be sufficient to ensure correct operation in the new era of distribution systems integrated by DGs. This research investigated the impact of …
-
Ratios-Based Universal Differential Protection Scheme for Power Transformers
… in power systems. It is subject to short circuit faults similar to any other component of the power system. Failure to detect these faults may result in transformer blaze and may subsequently lead to property damage. Therefore, transformer protection is of vital significance to provide reliable …
-
Modeling and simulation of magnetic components in electric circuits
… models used in a variety of contexts. A Passive Fault Current Limiter (FCL) was investigated using a saturable inductor with a magnet offset, and the comparison between measured and simulated results allows accurate prediction of the behaviour of the device. A series of broadband hybrid …
-
AN INTEGRATED OF CONTROL AND PROTECTION SCHEME FOR AC MICROGRIDS
… effective in protecting the microgrid against fault currents, either in grid–connected or islanded mode. In microgrid framework, distributed generation (DG) based RES require an interface of power electronic converters to regulate their output voltage, current, and frequency as well as to share …
-
MITIGATION OF SYNCHRONOUS MACHINE BASED DISTRIBUTED GENERATION INFLUENCES ON FUSE-RECLOSER PROTECTION SYSTEMS IN RADIAL DISTRIBUTION NETWORKS USING SUPERCONDUCTING FAULT CURRENT LIMITERS
… additive effect the DG has on the short circuit current characteristics of power systems during short circuit conditions. This thesis proposes a novel mitigation technique for synchronous machine based DG integration effects on existing radial fuse-recloser protection infrastructure. The …
-
Permanent Magnet Fault Current Limiters for Electrical Power Protection Systems
… work is to design and test a permanent magnet fault current limiter (PMFCL) to limit the fault current in electrical power system network. The (fit and forget) device presented in this thesis is based on two important aspects; the best selection of the state of the art soft and hard magnetic …
-
Distribution Network modelling and analysis of the application of HTS Transformer
… modelling of load flow, system losses and over current phenomena to be experienced by the transformer. Even though HTS technology is claimed to offer better power system and other packaging benefits, the performance and reliability need to be proven and verified through the proper modelling of …
-
Specification, Placement, and Control of Fault Current Limiters In Power Systems
This dissertation focuses on the application of fault current limiters (FCLs) in power systems. The formula for the maximum first-peak fault current is derived to assist in specifying inductive FCLs. The specification process can be used to design and select proper FCL devices in a particular power …
-
Kühlung eines resistiven HTSL-Kurzschlussstrombegrenzers mit einer Gemisch-Joule-Thomson-Kältemaschine
Die vorliegende Arbeit beschäftigt sich nach der Analyse und Optimierung der Stromzuführungen auf Flüssigstickstoff-Temperaturniveau, hauptsächlich mit der Untersuchung einer Gemisch-Stickstoff-Kaskade als Kälteversorgungssystem eines resistiven HTSL-Kurzschlussstrombegrenzers. Unter einem …
-
DFIG-Based Split-Shaft Wind Energy Conversion Systems
… handles the regular operation well. However, the fault conditions may expose conditions on the converter and push it to its limits. Therefore, four different protection circuits are employed, and their effects are investigated and compared to evaluate their performance. These four protection …