Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 42 for “"Fault location (Engineering)"”.
-
On the design of reconfigurable ripple carry adders and carry save multipliers
The fault location and reconfigurable designs of Ripple Carry (RC) adders and Carry Save (CS) multipliers are studied in this thesis. The proposed designs can locate a faulty cell and reconfigure the faulty array to tolerate the faulty cell. Laser programming technique is used for fault location …
-
On-line validation of a distributed sensor system
Bibliography: leaf 149-152.
-
Data driven approach for fault detection and identification using competitive learning
… such actions or in other words when anomalies or faults are detected in a control system. The objective of Fault Detection and Identification (FDI) is to detect, isolate and identify these faults so that the system performance can be improved. When condition based maintenance needs to be performed …
-
A voltage-only method for estimating the location of transmission faults
… with actual data, a new voltage-only based fault location procedure that incorporates the system impedance matrices into the problem so that as few as three or four voltage recording devices can estimate the fault location over a wide area. This procedure can quickly help pinpoint the fault …
-
Distributed reconfiguration and fault diagnosis in cellular processing arrays
… hierarchical reconfiguration scheme for a fault-tolerant two-dimensional cellular architecture is presented, wherein an array of finite state machine cells controls the processing and switching elements. This allows the array to either reconfigure in the presence of faults, or to perform …
-
Concurrent detection of transient faults in microprocessors
… systems are due to the presence of transient faults. This is especially true of microprocessor-based systems working in a radiation environment that experience transient faults due to single event upsets. These upsets cause a temporary change in the state of the system without any permanent …
-
Performance analysis of augmented shuffle exchange networks
… the improvement in the performance of a class of fault tolerant multistage interconnection networks. In the network discussed here, fault tolerance is achieved by providing multiple redundant paths between the source and destination. The extra paths are obtained by providing redundant links …
-
Fault detection and identification in Permanent Magnet Synchronous Machines
… in various parts of their structure. These faults cause different and independent changes to the motor parameters and its response behavior. This requires different detection and mitigation methods based on the fault type, location, and severity. Therefore, an effective fault detection and …
-
Closed-loop subspace identification and fault diagnosis with optimal structured residuals
The development of system identification and fault diagnosis theory is of great practical significance. Systems are concerned with a broad spectrum of human-made machinery, including industrial production facilities (power plants, chemical plants, oil refinery, semiconductor fabrication plants, …
-
Plant-wide monitoring of processes under closed-loop control
Faults in industrial processes produce off-spec products, unsafe conditions, and damage to equipment. According to Misra et al. (1999), just in the U.S. petrochemical industries, an annual loss of $20 billion has been estimated because of poor monitoring and control of such abnormal situations. …
-
Ground fault detection for flexible high voltage power systems
… the high voltage power system, such as ground fault detection circuits, are being required to operate robustly in a high voltage power system that is exposed to electrical noise and significant variation in common mode impedance characteristics.This paper explores four different ground fault …
-
Gain-scheduled control based on online estimated sensor aging
… therefore, sensor performance degradation and fault diagnostics are essential. Indeed, degradation of sensor performance or sensor fault due to sensor aging affect the closed-loop system performance, reliability, and even stability. On the other hand, the increasing need for safety and …
-
Catastrophic fault diagnosis in dynamic systems using bond graph methods
… State University. Department of Mechanical Engineering, 1990
-
Intelligent transformer monitoring system utilizing neuro-fuzzy approach
Includes bibliographical references (pages 113-120).
-
Adaptable, scalable, probabilistic fault detection and diagnostic methods for the HVAC secondary system
… CUSUM method is able to detect the abrupt faults and most incipient faults, therefore is a reliable method to use. The results also show that overall improvement of FDD method is possible using Bayesian integration approach, given accurate parameters (sensitivity and specificity), but not …
-
Fault diagnosis in dynamic systems using reinforcement learning
… extend the concepts of reinforcement learning to Fault Diagnosis and Detection. The focus will be in trying to detect incipient faults in dynamic systems which are incompletely specified, or which have unmodeled and uncertain dynamics, or in the presence of noise. The method of Temporal …
-
Fault location and control optimization planner (Expert system approach)
… engineer. The current implementation includes fault identification, diagnostic and process settings in case of low efficiency and poor quality in the product. This research is a part of large research project in flexible manufacturing.</p><p>The system is intended to grow into a complete …
Page 1 of 3