Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 251 for “"Fe-Cr"”.

  1. Characterization of high damping Fe-Cr-Mo and Fe-Cr-Al alloys for naval ships application

    The metallurgical basis for high damping in Fe-Cr-based alloys was investigated. Two alloys similar to VACROSIL-010 were studied, with compositions of 84.7 Fe-11.44 Cr-2.91 A1 and 84.8 Fe-11.65 Cr-2.92 Mo. The strain dependence of specific damping capacity (SDC) was evaluated using a modified …

    nps Repository record for Characterization of high damping Fe-Cr-Mo and Fe-Cr-Al alloys for naval ships application (opens in a new tab)

  2. Irradiation effects on Fe-Cr alloys

    <p>Ferritic chromium steels are important structural materials for future nuclear fission and fusion reactors due to their advantages over traditional austenitic steels, including low swelling rates, better thermal fatigue resistance, and lower thermal expansion coefficients. Radiation-induced …

    oxford Repository record for Irradiation effects on Fe-Cr alloys (opens in a new tab)

  3. Analýza binárních slitin v systému Fe-Cr-Ti

    Tato práce řeší přípravu slitin Ti-Fe, Fe-Cr a Ti-Cr o vysokém podílu intermediálních fází. Teoretická část práce obsahuje základní poznatky o fázových rovnovážných diagramech. Zabývá se také fázemi vznikajícími v kovových soustavách a binárními diagramy připravených slitin. Experimentální část …

    brno-tech Repository record for Analýza binárních slitin v systému Fe-Cr-Ti (opens in a new tab)

  4. Irradiation damage in neutron-irradiated Fe-Cr model alloys

    Ferritic-martensitic (F-M) steels are considered as lead candidate structural materials for Generation IV fission reactors and future fusion reactors. Compared to austenitic stainless steels, these steels have superior properties in thermal conductivities and thermal expansion coefficients. In …

    uiuc Repository record for Irradiation damage in neutron-irradiated Fe-Cr model alloys (opens in a new tab)

  5. Micro-mechanics of irradiated Fe-Cr alloys for fusion reactors

    … simulation methods. Through investigation of the Fe-Cr system, this detailed study explores the challenges and limitations in the use of currently available radiation sources for fusion materials research.</p> <p>An investigation of ion-irradiated Fe12%Cr using nanoindentation with a cube corner, …

    oxford Repository record for Micro-mechanics of irradiated Fe-Cr alloys for fusion reactors (opens in a new tab)

  6. Effect of SO2 on corrosion behaviour of Fe-Cr-(Mn, Si) and Fe-Cr-Ni-(Mn, Si) alloys in CO2-H2O gases at high temperatures

    Oxyfuel process makes CO2 capture feasible but raises corrosion problems for materials used. It is known that CO2 leads to a rapid breakaway oxidation of Fe-Cr alloys, which however, form a protective chromia scale in air/O2 gas. In coal combustion process, sulphur is unavoidable which could affect …

    unsw Repository record for Effect of SO2 on corrosion behaviour of Fe-Cr-(Mn, Si) and Fe-Cr-Ni-(Mn, Si) alloys in CO2-H2O gases at high temperatures (opens in a new tab)

  7. Fundamentals of Cavity Formation in α-Fe and Fe-Cr Alloys

    <p>Ferritic-martensitic steels are attractive candidate materials for fusion and advanced fission reactors primarily due to their low swelling characteristic, attractive thermo-mechanical properties, and the potential for development of nanostructured ferritic alloys. However, significant …

    utk-theses Repository record for Fundamentals of Cavity Formation in α-Fe and Fe-Cr Alloys (opens in a new tab)

  8. A study of irradiation damage in iron and Fe-Cr alloys

    <p>Irradiation damage structures induced in pure Fe and Fe-Cr (up to 14%Cr) alloys by 2 MeV Fe+ ion irradiations in the temperature range 300-460°C were investigated by transmission electron microscopy. Specimens were irradiated in bulk to doses of 1.5 x 1019 Fe+/m2 (about 2.5 displacements per …

    oxford Repository record for A study of irradiation damage in iron and Fe-Cr alloys (opens in a new tab)

  9. TEM characterisation of heavy-ion irradiation damage in Fe-Cr alloys

    <p>Heavy-ion radiation damage in pure Fe and Fe-Cr binary alloys has been studied in this work using Transmission Electron Microscopy (TEM). </p> <p>Specimens were irradiated in bulk with 2 MeV Fe<sup>+</sup> ions with irradiation temperatures ranging from 300-600 degree C. Several irradiation …

    oxford Repository record for TEM characterisation of heavy-ion irradiation damage in Fe-Cr alloys (opens in a new tab)

  10. Grain Boundary Migration and Radiation Induced Segregation in Fe-Cr Alloys

    … reactors. This thesis investigates RIS in ferritic Fe- Cr alloys through the use of Atomic Kinetic Monte Carlo (AKMC) simulations, focusing on the interaction between solute atoms and migrating grain boundaries. The study explores the influence of temperature, solute concentration, and …

    clemson Repository record for Grain Boundary Migration and Radiation Induced Segregation in Fe-Cr Alloys (opens in a new tab)

  11. Μελέτη της κινητικής της τάξης μικρής εμβέλειας στο κράμα Fe-Cr

    … εξάρτηση της τάξης μικρής εμβέλειας στο κράμα Fe 5.8%Cr, το οποίο αποτελεί το κύριο συστατικό για ανοξείδωτους χάλυβες και είναι υποψήφιο να χρησιμοποιηθεί για εφαρμογές πυρηνικής σύντηξης. Η μελέτη των μεταβολών της τάξης μικρής εμβέλειας πραγματοποιήθηκε με μετρήσεις της παραμένουσας …

    athens Repository record for Μελέτη της κινητικής της τάξης μικρής εμβέλειας στο κράμα Fe-Cr (opens in a new tab)

  12. A thermodynamic analysis of the system Fe-Cr-Ni-C-O

    A thermodynamic database for the system Fe-Cr-Ni-C-O has been built using previously assessed binary and ternary systems. Six ternary systems, Fe-Cr-O, Fe-C-O, Fe-Ni-O, Cr-Ni-O, Cr-C-O, and Ni-C-O, have been assessed. Quaternary and quinary systems were calculated using only interpolation models. …

    aalto Repository record for A thermodynamic analysis of the system Fe-Cr-Ni-C-O (opens in a new tab)

  13. Nanostructured high magnetic anisotopy Pt-TM (TM=Co, Fe, Cr) films

    … recording. These include the chemically ordered FePt, CoPt, CrPt3 alloys and the Co/Pt superlattices. The main goal of this work is to provide a comprehensive morphological, structural and magnetic characterization of nanostructured films. The work focuses on four different areas that deal with …

    greece Repository record for Nanostructured high magnetic anisotopy Pt-TM (TM=Co, Fe, Cr) films (opens in a new tab)

  14. MICROSTRUCTURE EVOLUTION AND MECHANICAL RESPONSE OF THERMALLY AGED AND IRRADIATED FE-CR ALLOYS

    … uncertainties due to indentation size effects (ISE), pileup effects, and potential influence of surface quality or test methods. This study examined materials science principles of the nanoindentation test method to enable accurate prediction of bulk hardness from nano scale, and …

    utk-theses Repository record for MICROSTRUCTURE EVOLUTION AND MECHANICAL RESPONSE OF THERMALLY AGED AND IRRADIATED FE-CR ALLOYS (opens in a new tab)

  15. Stress Corrosion Cracking of Ni-Fe-Cr Alloys Relevant to Nuclear Power Plants

    Stress corrosion cracking (SCC) of Ni-Fe-Cr alloys and weld metals was investigated in simulated environments representative of high temperature water used in the primary and secondary circuits of nuclear power plants. The mechanism of primary water SCC (PWSCC) was studied in Alloys 600, 690, 800 …

    toronto-retro Repository record for Stress Corrosion Cracking of Ni-Fe-Cr Alloys Relevant to Nuclear Power Plants (opens in a new tab)

  16. Purification and analysis of ferrous chloride for an Fe/Cr flow battery application

    … fuels, concerns about adverse human health effects of air pollution, reduction of greenhouse gas emissions and climate change are globally recognised as some of the main factors that drive the transition to renewable energy sources. Unfortunately, these renewable energy sources are …

    nwu-za Repository record for Purification and analysis of ferrous chloride for an Fe/Cr flow battery application (opens in a new tab)

  17. The study of the deterioration of Fe-Cr-Ni alloys by Mössbauer spectroscopy

    … steels (alloys) with chromium content in the ferritic phase greater than 13% are subject to embrittlement due to hardening of the ferrite phase. Some components of the primary loops of Pressurised Water reactors (PWRs) are made of cast duplex stainless steels ( austenite and ferrite). This …

    nwu-za Repository record for The study of the deterioration of Fe-Cr-Ni alloys by Mössbauer spectroscopy (opens in a new tab)

  18. Einfluss der Bestrahlung mit energiereichen Teilchen auf die Härte von Fe-Cr-Legierungen

    Ferritisch/martensitische Cr-Stähle und deren oxiddispersionsverfestigte Varianten gehören zu den potenziellen Konstruktionswerkstoffen für Komponenten zukünftiger kerntechnischer Einrichtungen, wie z. B. Fusionsreaktoren und Spaltreaktoren der IV. Generation, die Strahlungsfeldern mit hohem …

    qucosa-diss

  19. Particle shape anisotropy and its effects in AlNiCo and Fe-Cr-Co magnet alloys.

    … treatment. Alnico alloys, and in particular a Fe-Al-Ni-Co alloy, are compared with Fe-Cr-Co alloys. The most striking observation throughout this work has been the great similarity in magnetic behaviour and metallurgical structure of the Alnico type alloys and the Fe-Cr-Co alloys.The alloys …

    sheffield-hallam Download PDF for Particle shape anisotropy and its effects in AlNiCo and Fe-Cr-Co magnet alloys. (opens in a new tab)

Page 1 of 13