Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 43 for “"FeAl"”.

  1. Densification and Mechanical Properties of Nanocrystalline FeAl

    … measurements were performed on nanocrystalline FeAl specimens sinterforged to full density. The tests were conducted over the temperature range of 500--600°C, and using punches with diameters of 0.5 and 0.2 mm. For specimens sinterforged at 500°C, a decrease in creep rate was observed …

    uiuc Repository record for Densification and Mechanical Properties of Nanocrystalline FeAl (opens in a new tab)

  2. Specific heat and electrical resistivity of FeAl alloys

    … structure) while the other three were in the FeAl phase region (B2 structure). The resistivity at 25°C increased with increasing disorder (increasing Al content for Fe&sub3;Al and increasing Fe content for FeAl), reaching a maximum value of ∼165 μΩ-cm at the Fe&sub3;Al-FeAl phase boundary.</p> …

    utk-theses Repository record for Specific heat and electrical resistivity of FeAl alloys (opens in a new tab)

  3. Estudio teórico de catalizadores intermetálicos PdGa y de la aleación FeAl

    … del hidrógeno sobre el sistema bimetálico B2 FeAl con defectos puntuales. En este caso se determinó la ubicación de la impureza en un sitio intersticial octaédrico y los resultados se compararon con cálculos de densidad funcional y con algunos resultados experimentales de la literatura. En una …

    uns-ar Repository record for Estudio teórico de catalizadores intermetálicos PdGa y de la aleación FeAl (opens in a new tab)

  4. Desarrollo de composites magnetostrictivos de FeAl y FeGa para su aplicación en sensores de deformación

    The control of stresses and deformations in the hull of a ship is vitally important for the safety of navigation as well as for its proper functioning. Currently, the control of the good condition of the ship's structure is carried out by the Classification Societies during the regular reviews of …

    oviedo Repository record for Desarrollo de composites magnetostrictivos de FeAl y FeGa para su aplicación en sensores de deformación (opens in a new tab)

  5. Defect Structures in Ordered Intermetallics; Grain Boundaries and Surfaces in FeAl, NiAl, CoAl and TiAl

    … grain boundary structures in B2 aluminides, FeAl, NiAl and CoAl and <I>L</I>1₀ γ-TiAl were investigated using molecular statics and embedded atom potentials in order to explore general trends for a series of B2 compounds as well as TiAl. The potentials used correctly predict the proper …

    vt Repository record for Defect Structures in Ordered Intermetallics; Grain Boundaries and Surfaces in FeAl, NiAl, CoAl and TiAl (opens in a new tab)

  6. Deformation mechanisms in B2 aluminides: shear faults and dislocation core structures in FeAl, NiAl, CoAl and FeNiAl

    … B2 aluminides with increasing ordering energy (FeAl, NiAl, CoAl). The simulation results in NiAl were compared with in-situ straining observations of dislocation motion. The dislocations simulated were of (100) and (111) types. The simulations results obtained indicate a strong influence of the …

    vt Repository record for Deformation mechanisms in B2 aluminides: shear faults and dislocation core structures in FeAl, NiAl, CoAl and FeNiAl (opens in a new tab)

  7. Oxidation Properties of Fe-Al Alloys at 1173K

    … oxygen, wet oxygen, laboratory air and alloy/(Fe+FeAl₂O₄+Al₂O₃) diffusion couples at 1173K. The reaction kinematics were determined thermogravimetrically and by layer thickness measurements. The reacted specimens were analyzed using light microscopy, electron metallography, x-ray diffraction, …

    mcmaster Repository record for Oxidation Properties of Fe-Al Alloys at 1173K (opens in a new tab)

  8. Processing, mechanical behavior, and microstructural characterization of liquid phase sintered intermetallic-bonded ceramic composites

    … carbide phase mixed with a Ni<sub>3</sub>Al or FeAl binder phase were successfully fabricated by liquid phase sintering and hot isostatic compaction methods. The influence of carbide type, binder type, and binder content on the flexural strength, hardness, fracture toughness, and corrosion …

    ut-knoxville Repository record for Processing, mechanical behavior, and microstructural characterization of liquid phase sintered intermetallic-bonded ceramic composites (opens in a new tab)

  9. High Temperature Sulfidation Properties of Fe-Al Alloys

    … in periodic precipitation of sulfide (FeS+FeAl₂S₄) bands in the alloy. The thickness of sulfide bands increases with depth satisfying the Jablczynski's relationship for Liesegang type of precipitation process. The initial stage of sulfide band formation is explained by a model involving …

    mcmaster Repository record for High Temperature Sulfidation Properties of Fe-Al Alloys (opens in a new tab)

  10. Thermodynamic studies in liquid Fe-Nb-O, Fe-AI-O, Fe-Al-Mn-O systems, using solid electrolytes

    … FeNb₂O₆ [1550ºC - 1600ºC]</p> <p>(b) ΔGºT[FeAl₂O₄(s) - Al₂O₃(s)] = 49910 - 21.50 T(±300) cal/mole FeAl₂O₄ [1550ºC - 1600ºC]</p> <p>(c) Increasing the manganese content in the melt decreases the value of logh₀ in equilibrium with the transition reaction.</p> <p>The nature of the deoxidation …

    mcmaster Repository record for Thermodynamic studies in liquid Fe-Nb-O, Fe-AI-O, Fe-Al-Mn-O systems, using solid electrolytes (opens in a new tab)

  11. Phasenpetrologische Untersuchungen im System Lazulith-Scorzalith

    … Lazulith-Scorzalith (MgAl2(OH)2(PO4)2 -FeAl2(OH)2(PO4)2 ist von großem Interesse, da natürliche Lazulithe potentielle Indexminerale für die Geothermometrie und -barometrie für die Bildungsbedingungen metamorpher Gesteine sind. Hierfür wurde der thermodynamische Datensatz für dieses …

    cau-kiel Repository record for Phasenpetrologische Untersuchungen im System Lazulith-Scorzalith (opens in a new tab)

  12. Properties and site substitutions for ternary chromium additions to B2 iron aluminides

    … made of the site substitution of Cr in the B2 FeAl using the variable x-ray energy of a synchrotron source. Seven compositions were chosen of which three were binary FeAl alloys. It was found that Cr had a clear preference for the Al site for all the compositions. The amount of Al on the Fe …

    ut-knoxville Repository record for Properties and site substitutions for ternary chromium additions to B2 iron aluminides (opens in a new tab)

  13. The Sulphidation Properties of Fe-10wt% Al Alloys at 1173 K in H₂S/H₂ Atmospheres

    … of Fe₁₋ᵪS, an inner layer composed of Fe₁₋ᵪS + FeAl₂S₄ having a pearlitic appearance and Al₂S₃ platelets or needles at the alloy/scale interface. At long exposure, a film of FeAl₂S₄ + Al₂S₃ develops at the alloy/scale interface. Two models are advanced for the growth of this film. The presence …

    mcmaster Repository record for The Sulphidation Properties of Fe-10wt% Al Alloys at 1173 K in H₂S/H₂ Atmospheres (opens in a new tab)

  14. The thermographic nondestructive evaluation of iron aluminide green sheet

    … The first step in the fabrication of thin FeAl alloy sheet is the formation of a green sheet by cold rolling FeAl powder mixed with organic binding agents. The green sheet composite has a bulk density, which is typically less than about 3.6 g/cc. The finished sheet, with a density of about …

    wm-mary Repository record for The thermographic nondestructive evaluation of iron aluminide green sheet (opens in a new tab)

Page 1 of 3