Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 74 for “"Feedrate"”.
-
Time-Optimal Feedrate Planning for Freeform Toolpaths for Manufacturing Applications
… desired yet competing attributes of time-optimal feedrate planning. A well-designed algorithm can vastly increase machining productivity, by reducing tool positioning time subject to limits of the machine tool and process kinematics. In the optimization, it is crucial to not overload the machining …
-
Discrete modeling of sculptured surface machining for robust automatic feedrate selection
Traditional feedrate selection techniques currently used in three and five-axis CNC machining reduces milling efficiency. Manually estimated feedrates tend to be conservative and constant, greatly increasing mill time. The goal of this research is to develop robust techniques and software tools for …
-
Feedrate optimization with contouring error and drive constraints in five-axis machining
… can be decreased by reducing the machining feedrate, this causes the cycle time to increase resulting in less productivity. This thesis proposes a feedrate optimization method which minimizes the process cycle time without violating contouring error limits as well as velocity, acceleration …
-
Effect of feedrate, depth of cut, tool material, and toolpath on dimensional accuracy and surface roughness of milled CFRP
… Fiber Reinforced Polymers (CFRP) milling, like feedrate, tool material, and cutting speed. CFRP offers excellent material properties, which led to the increase of the material in today's manufacturing industry. CFRP offers up to 2.25 times steel's modulus of elasticity at about a fifth of the …
-
Smooth and Time-Optimal Trajectory Generation for High Speed Machine Tools
… must be equipped with spline interpolation, feedrate modulation, and feedrate optimization capabilities. This thesis presents the development of novel trajectory generation algorithms for Non Uniform Rational B-Spline (NURBS) toolpaths that can be implemented on new low-cost CNC's, as well …
-
Motion command generation for multi-axis machining
… benefits of parametric splines with controlled feedrate. To deterministically attain a near constant feedrate tool-path, near arc-length parameterized splines are prepared off-line. The C2 position spline which is near arclength parameterized improves on the previously reported research. The …
-
Optimal trajectory generation and precision tracking control for multi-axis machines
… verified smooth trajectory generation, feedrate optimization, and high performance control algorithms developed for multi-axis Cartesian machine tools. New spline parameterization and interpolation schemes are introduced that yield smooth contouring motion with minimal feedrate …
-
ΑΝΑΠΤΥΞΗ ΕΝΟΣ ΕΞΕΛΙΓΜΕΝΟΥ ΣΥΣΤΗΜΑΤΟΣ ΕΛΕΓΧΟΥ ΠΟΛΥΑΞΟΝΙΚΗΣ ΦΡΕΖΑΣ
… THE SYSTEM PROVIDES ACCURACY, UNIFORMITY OF FEEDRATE ALONG THE PATH AND MAXIMUM FEEDRATE. TOOL CENTER PATH IS GENERATED BY HIGHLY ACCURATE INTERPOLATION ROUTINES WHICH GENERATE CUTTING STEPS EQUAL TO THE RESOLUTION OF THE MILLING MACHINE.A DIFFERENT APPROACH IN IMPLEMENTING THE CIRCULAR …
-
Smooth and Time-Optimal Trajectory Planning for Multi-Axis Machine Tools
This thesis presents novel methods for feedrate optimization and toolpath smoothing in CNC machining. Descriptions of the algorithms, simulation test cases, and experimental results are presented. Both feedrate optimization and toolpath smoothing are essential for increasing manufacturing …
-
Five-axis trajectory generation methods
… b-spline toolpath yielding a consistent feedrate profile during contouring operations. It is shown that feed correction method exhibits reduced feedrate fluctuations when compared to the widely used Taylor Series approximations. A jerk continuous feedrate profile in terms of C³ quintic …
-
Virtual milling
… program, but also to integrate features such as feedrate scheduling. A milling simulation for the whole part was developed based on the analytical closed-loop milling model presented by Spence[36]. The input to the simulation is the cutter-workpiece intersections along the tool path. The …
-
System Characterization, Control and Optimal Feed -Rate Scheduling for High -Speed Machining and Nano Positioning
Finally, a provably-optimal feedrate-optimization (trajectory planning) algorithm is developed to exploit the capabilities of a given physical motion system. System capabilities and process requirements are modeled and formulated as constraints to drive the algorithm. The resulting trajectory makes …
-
A study on productivity enhancement in high-speed, high-precision micromilling processes
… of micromilling is limited by the low feedrates necessitated by the inherent high precision and small feature size. In this study, several scale effects present at the microscale are identified, in particular the increase of the ratio of tool size to feature size, and the corresponding …
-
Implementation of a power adaptive fuzzy control system for end milling processes.
… simple triangular membership functions for both feedrate and spindle speed. The system also features a scaling factor adjustment mechanism used to tune the gain coefficients. The system is first examined by simulation using Simulink and Matlab fuzzy logic toolbox and then verified by various …
-
Real time trajectory generation and interpolation
… for tighter machining tolerances and reduced feedrate fluctuations and the undesired acceleration harmonics in the overall feed motion and in each of the motor motions. An optimal and feasible feedrate profile have been used to continuously maneuver the cutting tool with the interpolated …
-
Virtual three-axis milling process simulation and optimization
… edge - part engagement, cutting coefficient and feedrate. Cutters with arbitrary geometries are modeled parametrically, and the intersection of helical cutting edges with workpiece features are evaluated either analytically or numerically depending on geometric complexity. The dynamics of …
-
CAD-based simulation of spiral bevel gear manufacturing processes and investigation of optimal process parameters
… specifically, the study revealed that generation feedrate has a major effect on the quality of both tooth flanks and finishing stock allowance, plunge feedrate and generation feedrate greatly impact the developed cutting forces.
-
Optimum design and machining parameters of a permanent magnet brushless DC linear motor as a CNC feed drive
… velocity results have been utilized to provide feedrate levels for design of experiments (DOE). DOE has been conducted to provide force, tolerance, and surface finish data necessary for the performance comparison of a DC servo motor/ballscrew equipped CNC vertical milling machine and a PMBDCLM …
-
Cutting Mechanisms in Micro-Endmilling and Their Influence on Surface Generation
… One of the most important findings is that a feedrate of 1-1.5 times of the minimum chip thickness is a good starting point for process planning to achieve small surface roughness.
-
Reducing Curvature in Complex Tool Paths by Deviating from CAM-Produced Tool Paths Within a Tolerance Band
… path within an allowable path tolerance. The feedrate along the tool path is directly related to the curvature of the tool path. High-curvature sections cause the NC machine to reduce the feedrate along the tool path due to acceleration and jerk limits. These lower feedrates increase machining …
Page 1 of 4