Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1158 for “"Ferrous"”.
-
Evaluating Identification and Sorting Technologies for Improved Ferrous and Non-Ferrous Recycling
… external factors that impact the development of ferrous and nonferrous recycling operations. This knowledge is then applied to design and perform an extensive “true to yard” analysis with technologies that have potential for addressing inbound inspection and material identification challenges. …
-
Inspection of ferrous materials
Electronic Thesis or Dissertation
-
Corrosion-fatigue in ferrous alloys
Abstract Not Provided.
-
Joining of non-ferrous metals
The subframe is a large component in a car and is important for meeting the cost, weight and sustainability targets. A light and cost-effective aluminium subframe is therefore interesting for future use. The joining of high-pressure die casted components and extruded aluminium beams was …
-
A Mössbauer study of ferrous silicates
The Mössbauer spectra of three types of ferrous silicates, almandine garnet, olivine and hedenbergite, have been recorded over a wide range of temperatures, and the effects on the spectra of substitution by magnetic or non-magnetic ions have been investigated. A new assignment has been proposed for …
-
Organic Coatings to Protect Ferrous Structures
… Results showed that coating systems can protect ferrous structures in ways of barrier protection and cathodic protection and can be improved by the application of modern methods and equipment.
-
Non-ferrous compositely reinforced concrete columns
<p>The experimental programme investigated the behaviour of 81 stocky concrete-filled E-glass FRP-composite columns subject to nominal eccentric load. The main parameters investigated were concrete strength, orientation of confining fibres, column slenderness and type of longitudinal FRP …
-
Ferric/ferrous determinations in synthetic biotite
… to 51 bars (at T = 750°C, P<sub>T</sub> = 1 kb). Ferrous iron contents of the annealed biotites were determined by wet chemical analyses. Total iron was determined by microprobe analyses to be equal to the stoichiometric values. The data confirm the predictions of Hazen and Wones (1972, 1978) …
-
Comparing Ferrous Chloride and Ferrous Sulfate as Secondary Coagulants at the Beaver Water District Drinking Water Treatment Plant
… a regulated inorganic DBP, BWD incorporated ferrous salt into their coagulation regime to quench chlorite to chloride. In this study, two ferrous salts - ferrous chloride (FC) and ferrous sulfate (FS) - were compared as secondary coagulants in combination with alum, the primary coagulant. …
-
FERROUS PROTOPORPHYRIN WITH ENHANCED PHOTODYNAMIC ANTIBACTERIAL PROPERTY
… as a photo-activated disinfectant. We have used Ferrous Protoporphyrin IX (FePPY9) which is a photosensitizer that can absorb visible light and shift to higher energy which will produce cytotoxic electrons and radicals when dropping back to a lower energy state.The enhanced antibacterial activity …
-
Surface treatment of ferrous alloys with boron
… the structures and properties of boronized ferrous alloys. Three types of steels, AISI 1018 (plain low carbon steel), AISI 4340 (high strength alloy steel), and AISI 304 (austenitic stainless steel), were used for this study. The boronized AISI 1018 and AISI 4340 demonstrated the saw-tooth …
-
High-rate centreless grinding of ferrous components.
… investigating plunge feed centreless grinding of ferrous components was undertaken. Results from approximately 300 grinding experiments were used to establish a data bank of grinding parameters for a range of grinding conditions. High-rate centreless grinding has been shown to be a feasible first …
-
Microstructure -Level Machining Modeling of Ferrous Alloys
The microstructure-level model was validated on machining of ductile iron and two of its constituents: pearlite and ferrite. Orthogonal cutting experiments and simulations were conducted of the three materials. The measured chip morphology and machining forces were compared with the model …
-
SELECTIVE LASER MELTING OF HIGH PERFORMANCE FERROUS ALLOYS
… SLM process is well understood remains small. Ferrous alloys are a technologically important class of materials but are largely untapped by SLM. To address the identified gaps in the literature, two types of ferrous alloys are investigated: high strength low alloy martensitic steels (AISI 4130, …
-
Sintering and its enhancement in ferrous powder compacts
Sintering maps have been developed for pure iron compacts. The maps have been drawn as a function of various sintering parameters such as particle size, green density, time and temperature. Two sets of diagrams have been drawn to define the sintering kinetics, namely, the field map and the neck …
-
Corrosion of basic refactories in non-ferrous converters
… refractory to fayalite type slags from the non-ferrous smelting and converting furnaces.
-
Binder Jetting and Heat Treatment of Ferrous Alloys
… was undertaken for BJ and heat treatment of ferrous metal powders. Iron (Fe) and silicon-iron (Fe-Si) powders were studied as materials of interest. The goals of this work were to establish process maps for BJ and sintering to achieve respectively high densities, as well as to better …
-
The radiation chemistry of aqueous ferrous sulphate solutions
The passage of particles such as alpha particles, electrons, and protons, or electromagnetic radiations in the form of X-rays or gamma rays, through a medium such as air or water, causes ionization in the medium by interaction with the extranuclear electrons of the molecules. Alpha particles, …
Page 1 of 58