Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 17453 for “"Fiber"”.

  1. High power fiber lasers and fiber devices

    Fiber lasers and fiber amplifiers have experienced considerable improvements in recent years and demonstrated remarkable power scalability. However, due to high optical intensity in the core, the performance of high power fiber lasers is limited by detrimental nonlinear processes, such as four-wave …

    ucf Repository record for High power fiber lasers and fiber devices (opens in a new tab)

  2. Specialty Fiber Lasers and Novel Fiber Devices

    … the 21st century, the field of specialty optical fibers experienced a scientific revolution with the introduction of the stack-and-draw technique, a multi-steps and advanced fiber fabrication method, which enabled the creation of well-controlled micro-structured designs. Since then, an extremely …

    ucf Repository record for Specialty Fiber Lasers and Novel Fiber Devices (opens in a new tab)

  3. Development of polypropylene fiber as concrete reinforcing fiber

    … of this research is to produce polypropylene fibers with improved interface bonding with a concrete matrix. The Laboratory Mixing Extruder paired with the Randcastle fiberline drawing device was used for producing fiber from polypropylene (PP) chips. A target diameter of 0.5 mm fiber was …

    ubc Repository record for Development of polypropylene fiber as concrete reinforcing fiber (opens in a new tab) Download PDF for Development of polypropylene fiber as concrete reinforcing fiber (opens in a new tab)

  4. Study of Single-Fiber Fiber Optic Lever Microphone

    Fiber optic sensors are widely used in today's technological applications, providing many advantages that conventional sensors lack. In particular, there is a demand in hypersonic applications to develop microphones to measure acoustic pressure that performs in high temperature and noisy …

    odu Repository record for Study of Single-Fiber Fiber Optic Lever Microphone (opens in a new tab)

  5. In-fiber Optical Devices Based on D-fiber

    … presents the fabrication and analysis of in-fiber devices based on elliptical core D-shaped optical fiber. Devices created inside optical fibers are attractive for a variety of reasons including low loss, high efficiency, self-alignment, light weight, multiplexibility, and resistance to …

    byu Repository record for In-fiber Optical Devices Based on D-fiber (opens in a new tab) Download PDF for In-fiber Optical Devices Based on D-fiber (opens in a new tab)

  6. Lumped fiber Raman amplifiers with highly nonlinear fiber

    Fiber Raman amplifiers (FRAs) can provide broadband and low-noise-figure amplification, and the gain can be achieved at any wavelength. It has been proved that FRA is a useful technique to extend the span lengths and capacity of fiber-optic transmission systems. In particular, lumped fiber Raman …

    concordia Download PDF for Lumped fiber Raman amplifiers with highly nonlinear fiber (opens in a new tab)

  7. New Method to Measure Cotton Fiber-to-Fiber Friction

    Cotton fiber friction plays a crucial role in regulating fiber flow during spinning and can influence yarn quality. In this study, a new method for measuring cotton fiber-to-fiber friction has been proposed, which adheres to the principle of an ASTM method but includes modifications in sample …

    ttu Repository record for New Method to Measure Cotton Fiber-to-Fiber Friction (opens in a new tab)

  8. Fiber Prestressing in Glass Fiber Reinforced Polymer (GFRP) Composites

    Fiber Reinforced Polymer (FRP) composite have found increasing use in several vital industries and applications, such as transportation, construction, sporting goods, and aircraft. The quality and mechanical properties of FRP composites are significantly influenced by many factors including the …

    uab Repository record for Fiber Prestressing in Glass Fiber Reinforced Polymer (GFRP) Composites (opens in a new tab)

  9. Implications of Fiber Nonlinearities on Coherent Optical Fiber Communications

    … with the capacity ultimately limited by Kerr fiber nonlinearities. The research presented in this thesis focuses on exploring solutions to fulfill the demand for increased capacity and studying advanced techniques for modelling and characterizing systems, predicting performance, and estimating …

    queens Repository record for Implications of Fiber Nonlinearities on Coherent Optical Fiber Communications (opens in a new tab)

  10. Advanced Specialty Fiber Designs for High Power Fiber Lasers

    The output power of fiber lasers has increased rapidly over the last decade. There are two major limiting factors, namely nonlinear effects and transverse mode instability, prohibiting the power scaling capability of fiber lasers. The nonlinear effects, originating from high optical intensity, …

    clemson Repository record for Advanced Specialty Fiber Designs for High Power Fiber Lasers (opens in a new tab)

  11. Characterization of Fiber Tapers for Fiber Devices and Sensors

    Fiber tapers have attracted much attention and have been successfully employed in various applications, ranging from resonators, filters, interferometers to sensors. This thesis studies the properties of fiber tapers for the purpose of making tapered-based devices and sensors in aerospace related …

    ottawa-retro Repository record for Characterization of Fiber Tapers for Fiber Devices and Sensors (opens in a new tab)

  12. Optical Fiber Devices: Novel Fiber Lasers and Image Amplifier

    Three fiber based optical devices: all phosphate glass fiber laser, single hybrid mode fiber laser, and fiber image amplifier, were investigated in this dissertation. Phosphate fiber Bragg grating (FBG) is desired to improve performance of recently developed high power single frequency lasers that …

    arizona-thes Repository record for Optical Fiber Devices: Novel Fiber Lasers and Image Amplifier (opens in a new tab)

  13. Detection of fiber fracture in Unidirectional Fiber Reinforced Composites using an In-Plane Fiber Optic Sensor

    Fiber reinforced polymers (FRP) are an efficient and inexpensive method of repairing deteriorating infrastructure. FRP sheets can be applied to spalling bridge sections and columns to prevent further deterioration and increase stiffness. However, the effect of the environment on the long-term …

    vt Repository record for Detection of fiber fracture in Unidirectional Fiber Reinforced Composites using an In-Plane Fiber Optic Sensor (opens in a new tab)

  14. Fiber Tracking and Fiber Tract Segmentation Using Diffusion Tensor Imaging

    … a popular tool for noninvasively investigating fiber tract structures. Fiber tracking and tract segmentation are two major tasks in DTI studies. However, fiber crossing is a well known issue in DTI because DTI cannot model crossing fiber orientations (FOs). Therefore, fiber tracking and tract …

    jhu Repository record for Fiber Tracking and Fiber Tract Segmentation Using Diffusion Tensor Imaging (opens in a new tab)

  15. MINIATURIZED FIBER MODAL INTERFEROMETERS AND THEIR APPLICATIONS AS FIBER SENSORS

    Fiber in-line miniaturized modal interferometers (MMIs) have attracted much attention due to their inherent advantages, such as simple and compact structure, small size, low cost, and easy fabrication, especially, they have wide applications in fiber filters and fiber sensors. In this thesis, four …

    nus Repository record for MINIATURIZED FIBER MODAL INTERFEROMETERS AND THEIR APPLICATIONS AS FIBER SENSORS (opens in a new tab) Download file for MINIATURIZED FIBER MODAL INTERFEROMETERS AND THEIR APPLICATIONS AS FIBER SENSORS (opens in a new tab)

  16. Prediction of Fiber Orientation During Processing of Short Fiber Composites

    The fiber orientation pattern created by the flow of a suspension of short fibers controls the physical and mechanical properties of a short fiber composite material. The orientation of the fibers at any point in the composite plays the role of a structural state variable. Two sets of even-order …

    uiuc Repository record for Prediction of Fiber Orientation During Processing of Short Fiber Composites (opens in a new tab)

  17. Chemical composition and fiber structure as factors affecting fiber fermentation

    … of cellulose as a factor affecting fiber fermentation by ruminants was studied. Using in vitro methodology, a significant improvement in rate of fermentation of wheat straw following alkaline hydrogen peroxide (AHP) treatment (treatment times of 1 h, 2 h or 3 h) was noted. Alkaline …

    uiuc Repository record for Chemical composition and fiber structure as factors affecting fiber fermentation (opens in a new tab)

  18. Flexural behavior of a glass fiber reinforced wood fiber composite

    … static and dynamic flexural properties of a wood fiber matrix internally reinforced with continuous glass fibers were investigated. When modelled as a sandwich composite, the static flexural modulus of elasticity (MOE) of glass fiber reinforced hardboard could be successfully predicted from the …

    vt Repository record for Flexural behavior of a glass fiber reinforced wood fiber composite (opens in a new tab)

  19. Analysis of fiber-reinforced composite plates utilizing curvilinear fiber trajectories

    … located circular holes were manufactured using a fiber placement technique. With two plates the fibers were steered around the holes in curvilinear trajectories. With the two other plates the fibers were placed in the conventional straight line format. For the case of the curvilinear trajectories, …

    vt Repository record for Analysis of fiber-reinforced composite plates utilizing curvilinear fiber trajectories (opens in a new tab)

Page 1 of 873