Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 99 for “"Fiber/matrix interface"”.

  1. Cohesive Zone Modelling of Fiber–Matrix Interface in Composite Materials

    Carbon Fiber reinforced polymers (CFRPs) are widely used in aerospace, automotive, and structural applications due to their high specific strength, stiffness, and design flexibility. Their mechanical performance is critically governed by the fiber–matrix interface which controls stress transfer and …

    embry-riddle Repository record for Cohesive Zone Modelling of Fiber–Matrix Interface in Composite Materials (opens in a new tab)

  2. Characterization and control of the fiber-matrix interface in ceramic matrix composites

    <p>The fiber-matrix interfacial forces in a composite strongly influence the strength and fracture behavior of the material. A weakly bonded interface leads to a low matrix fracture stress and low ultimate strength. As the composite is stressed, load is not transferred from the matrix to the …

    ut-knoxville Repository record for Characterization and control of the fiber-matrix interface in ceramic matrix composites (opens in a new tab)

  3. In situ characterization of fiber-matrix interface debonding via full-field measurements

    Macroscopic mechanical and failure properties of fiber-reinforced composites depend strongly on the properties of the fiber-matrix interface. For example, transverse cracking behavior and interlaminar shear strength of composites can be highly sensitive to the characteristics of the fiber-matrix …

    rowan Repository record for In situ characterization of fiber-matrix interface debonding via full-field measurements (opens in a new tab)

  4. Transverse fracture and fiber/matrix interface characteristics of hybrid ceramic matrix composites

    "Ceramic Matrix Composites (CMCs) represent an attractive class of engineering materials for use in high temperature, high wear and corrosive environments. Much effort has been made to ascertain and improve the strength and fracture characteristics of these materials. Approaches that have received …

    must-thes Repository record for Transverse fracture and fiber/matrix interface characteristics of hybrid ceramic matrix composites (opens in a new tab)

  5. Reduction of cure-induced stresses in thermoset polymer composites via chemical and thermal methods

    … in which the effect of polymer volume change on fiber stress is determined by monitoring the change in fiber load. In the first part of the research, we addressed the role of fiber-matrix interface on the fiber-load measurement. For this purpose, the CIST experiments were conducted with …

    ut-knoxville Repository record for Reduction of cure-induced stresses in thermoset polymer composites via chemical and thermal methods (opens in a new tab)

  6. A transmission electron microscope characterization of sodium sulfate hot corrosion of silicon carbide fiber-reinforced lithium aluminosilicate glass-ceramic matrix composite

    … of the phases in the glass-ceramic matrix and the fiber/matrix interface were studied. Microchemical analysis using energy dispersive x-ray spectroscopy (EDS) was also performed on all phases detected. Three samples were studied: (1) as-received, (2) no salt coating and annealed in …

    nps Repository record for A transmission electron microscope characterization of sodium sulfate hot corrosion of silicon carbide fiber-reinforced lithium aluminosilicate glass-ceramic matrix composite (opens in a new tab)

  7. Effect of Fiber Volume Fraction on Fracture Mechanics in Continuously Reinforced Fiber Composite Materials

    … these advantages, composites with brittle fibers have lower ductility and fracture toughness than monolithic materials. One way to increase the fracture toughness of composites is to have a weak fiber-matrix interface that would blunt crack tips by crack deflection into the interface and …

    usf Repository record for Effect of Fiber Volume Fraction on Fracture Mechanics in Continuously Reinforced Fiber Composite Materials (opens in a new tab)

  8. Analysis of matrix damage in single fiber composites

    <p>"A unidirectional fiber-reinforced composite under a tensile load in the direction of the fibers develops equal axial strains in the fiber and the matrix, if there are no initial cracks and the fiber/matrix interface is perfectly bonded. With further increase in the load, the fiber or the matrix …

    must-thes Repository record for Analysis of matrix damage in single fiber composites (opens in a new tab)

  9. TI Nano Powder Speckle Pattern Creation and Use in DIC of ZnO Modified Single Carbon Fibers

    … properties. Improving the adherence of the fiber-matrix interface is one important step for amplifying the capabilities of composites. Work has been performed in modifying carbon fibers by growing zinc oxide (ZnO) nanorods in the fiber surface using a hydrothermal approach, increasing …

    embry-riddle Repository record for TI Nano Powder Speckle Pattern Creation and Use in DIC of ZnO Modified Single Carbon Fibers (opens in a new tab)

  10. Fracture analysis of carbon fiber/epoxy matrix interface through microbond and cruciform tests

    In fiber-reinforced polymeric-matrix composites, the fiber/matrix interface plays a key role in transferring loads from the fibers to the matrix through shear. In this project, we investigate numerically two tests, used to characterize the normal and shear interfacial failure of a carbon …

    uiuc Repository record for Fracture analysis of carbon fiber/epoxy matrix interface through microbond and cruciform tests (opens in a new tab)

  11. Finite element analysis of a glass fiber inclusion

    … investigates the micromechanical behavior of a fiber-reinforced composite. Two realistic deviations from the typical set of simplifying assumptions are considered: nonhomogeneous matrix properties and imperfect fiber/matrix bonds. The stress effects due to a soft matrix interlayer at the fiber …

    ucf Repository record for Finite element analysis of a glass fiber inclusion (opens in a new tab)

  12. Sensitivity studies on the shear lag parameter β using analytical and numerical techniques

    The strength of fiber-reinforced composites is dependent on the strength of the fiber-matrix interface bond. Thermal, chemical, and other means have been used to modify the surface of fibers, resulting in increased fiber-matrix interface bond strength. However, researchers are still dependent on …

    rowan Repository record for Sensitivity studies on the shear lag parameter β using analytical and numerical techniques (opens in a new tab)

  13. Creep behavior of the interface region in continuous fiber reinforced metal-matrix composites

    The accurate incorporation of interface effects on creep in metal matrix composites is contingent on the direct experimental determination of the deformation kinetics. The goal is accomplished by isolating the composite interface and precisely measuring the creep characteristics of the interface, …

    nps Repository record for Creep behavior of the interface region in continuous fiber reinforced metal-matrix composites (opens in a new tab)

  14. Computational Modelling And Surface Charachterization Of Interface In Polymer Composites By Atomic Force Microscopy

    … properties than both the reinforcement and the matrix. Of the several factors which govern the final property of the composite, the interface is the single most factor that influences the stress transfer mechanism from the fiber to the matrix. The interface bond strength is also influenced by …

    uab Repository record for Computational Modelling And Surface Charachterization Of Interface In Polymer Composites By Atomic Force Microscopy (opens in a new tab)

  15. Fiber coatings and the fracture behavior of a woven continuous fiber fabric-reinforced ceramic composite

    <p>Nicalon® plain-weave fiber fabric-reinforced silicon carbide (SiC) matrix composites with various fiber/matrix interface coating thicknesses have been successfully fabricated by novel forced chemical vapor infiltration (FCVI) methods. The influence of the interface coating thickness on the …

    ut-knoxville Repository record for Fiber coatings and the fracture behavior of a woven continuous fiber fabric-reinforced ceramic composite (opens in a new tab)

  16. Multi-scale investigation of microstructure, fiber-matrix bond, and mechanical properties of ultra-high performance concrete

    … study is to provide new insights into enhancing fiber-matrix bond and mechanical properties of ultra-high performance concrete (UHPC). Three main strategies were investigated: 1) use of supplementary cementitious materials; 2) use of nano-particles; and 3) use of deformed fibers. A multi-scale …

    must-thes Repository record for Multi-scale investigation of microstructure, fiber-matrix bond, and mechanical properties of ultra-high performance concrete (opens in a new tab)

  17. A study of the mechanical behavior of a 2-D carbon-carbon composite

    … interlaminar, with cracks propagating along the fiber-matrix interface. Finite element analyses of a two-ply carbon-carbon composite under in-plane, out-of-plane, and thermal loading were performed. Stress distributions were studied as a function of stacking sequence, undulation aspect ratio, and …

    vt Repository record for A study of the mechanical behavior of a 2-D carbon-carbon composite (opens in a new tab)

  18. Effect of interfacial thermal conductance and fiber orientation on the thermal diffusivity/conductivity of unidirectional fiber-reinforced ceramic matrix composites

    The role of an interfacial barrier at the fiber-matrix interface in the heat conduction behavior of an uniaxial silicon carbide fiber-reinforced reaction-bonded silicon nitride and the effect of fiber orientation on the heat conduction characteristics of carbon fiber-reinforced borosilicate glass …

    vt Repository record for Effect of interfacial thermal conductance and fiber orientation on the thermal diffusivity/conductivity of unidirectional fiber-reinforced ceramic matrix composites (opens in a new tab)

  19. An Investigation of the Tensile Strength and Stiffness of Unidirectional Polymer-Matrix, Carbon-Fiber Composites under the Influence of Elevated Temperatures

    … thought that the unidirectional strength in the fiber direction of fiber dominated composites was not influenced by the matrix material. As long as the fiber was not affected then the strength would remain. However this thesis will challange that belief. The unidirectional strength in the fiber …

    vt Repository record for An Investigation of the Tensile Strength and Stiffness of Unidirectional Polymer-Matrix, Carbon-Fiber Composites under the Influence of Elevated Temperatures (opens in a new tab)

Page 1 of 5