Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 33 for “"Fiber Aspect Ratio"”.

  1. Nonlinear Finite Element Micromechanic Analysis of Thermoplastic Composite of Recycled High Density Polyethylene Reinforced with Short Glass Fibers

    … polyethylene (HDPE) reinforced with short glass fibers using finite element method. The composite material was modeled using a micromechanic unit cell to simulate the stress distribution between the plastic matrix and the fiber in the composite. Nonlinear behavior of recycled HDPE and imperfect …

    eiu Repository record for Nonlinear Finite Element Micromechanic Analysis of Thermoplastic Composite of Recycled High Density Polyethylene Reinforced with Short Glass Fibers (opens in a new tab)

  2. Fiber orientation in a headbox

    The prediction of fiber orientation is a critical parameter for papermakers who wish to control the quality of their paper products. The wet end processes, especially the headbox and the drainage stage on the forming wire, play important roles in determining the fiber orientation characteristics. …

    ubc Repository record for Fiber orientation in a headbox (opens in a new tab) Download PDF for Fiber orientation in a headbox (opens in a new tab)

  3. Modeling of convective heat transfer coefficient of graphite foam and effective young's modulus of short fiber-reinforced composite

    … analysis on effective Young's modulus of short fiber-reinforced composite. The present efforts focus on the relationship between the vital microstructural parameters (e.g., pore size, porosity, fiber aspect ratio, etc.) and overall properties (eg, convective heat transfer coefficient and …

    ut-knoxville Repository record for Modeling of convective heat transfer coefficient of graphite foam and effective young's modulus of short fiber-reinforced composite (opens in a new tab)

  4. Using a Sliding Plate Rheometer to Obtain Material Parameters for Simulating Long Fiber Orientation in Injection Molded Composites

    … determining empirical parameters in stress and fiber orientation models required to accurately simulate the fiber orientation in injection molded composites. An independent approach aims to obtain the material parameters using a sliding plate rheometer to measure the rheology of fiber …

    vt Repository record for Using a Sliding Plate Rheometer to Obtain Material Parameters for Simulating Long Fiber Orientation in Injection Molded Composites (opens in a new tab)

  5. A study of micro fiber dispersion using digital image analysis

    … the use of texture analysis as a tool to micro fiber dispersion measurement. Micro fiber dispersion can be found in many applications such as in paper and industry powder engineering. Three cases related to micro fiber dispersion were investigated in this study. The first case was the …

    tamu Repository record for A study of micro fiber dispersion using digital image analysis (opens in a new tab)

  6. Numerical determination of elastic and viscoelastic properties of aligned continuous and discontinuous fiber reinforced composites.

    … RVE research has primary focused on continuous fiber composites. Little attention has been given to discontinuous short fiber reinforcements, especially when viscoelastic properties are of interest. This thesis develops an RVE-based approach for composites with aligned continuous and …

    baylor Repository record for Numerical determination of elastic and viscoelastic properties of aligned continuous and discontinuous fiber reinforced composites. (opens in a new tab)

  7. MULTI-FUNCTIONAL NANOSTRUCTURED FILMS FROM CELLULOSE NANOFIBERS

    … and then assessed the dimensions of single fibers from different wood species. We studied the dependence of cellulose nanopaper strength and toughness on the size of cellulose fibers using dynamic mechanical analysis (DMA). Interestingly, we found that both the strength and toughness …

    maryland Repository record for MULTI-FUNCTIONAL NANOSTRUCTURED FILMS FROM CELLULOSE NANOFIBERS (opens in a new tab)

  8. Effect of thermal residual stresses on the stress-strain behavior of metal-matrix composites

    … on the stressstrain response of a discontinuous fiber-reinforced metalmatrix composite in tensile and compressive loading. The material chosen for this investigation was the SiC-whisker reinforced Al 6061. The difference between composite flow behavior in tension and compression, as well as the …

    nps Repository record for Effect of thermal residual stresses on the stress-strain behavior of metal-matrix composites (opens in a new tab)

  9. Effect of fiber-matrix coupling on the mechanical properties of a totally bioabsorbable composite

    … on the amino acid tyrosine and calcium phosphate fibers were studied. The effect of the fiber aspect ratio on the elastic modulus of a discontinuous fiber composite was analyzed using the SMC composite micromechanics computer model. The mechanical stiffness of this polymer was found to be superior …

    njit Repository record for Effect of fiber-matrix coupling on the mechanical properties of a totally bioabsorbable composite (opens in a new tab)

  10. An analysis of factors associated with the cytotoxicity of natural and man-made mineral fibers

    <p>Natural and man-made mineral fibers possess physical and chemical characteristics that have been associated with cytotoxicity. Among these are fiber length, fiber width, fiber aspect ratio, and surface chemistry. This study correlated measurements of these characteristics with their respective …

    ut-knoxville Repository record for An analysis of factors associated with the cytotoxicity of natural and man-made mineral fibers (opens in a new tab)

  11. Modeling of stress transfer in fiber-reinforced ceramic matrix composites

    … to investigate the stress distribution in fiber-reinforced ceramic matrix composites (CMCs) subjected to temperature changes and uniaxial tensions. The analytical model satisfies all equations of equilibrium, all stress-strain-temperature relations, all except two boundary and interface …

    ut-knoxville Repository record for Modeling of stress transfer in fiber-reinforced ceramic matrix composites (opens in a new tab)

  12. Processing and properties of composites based on high density polyethylene and thermotropic liquid crystalline polymers

    … injection molding. It was observed that when the fiber aspect ratio dropped, the composite mechanical properties decreased. When pregenerated fibrils were maintained during injection molding at temperatures above the matrix melting point, but below the TLCP melting point, microcomposites were …

    vt Repository record for Processing and properties of composites based on high density polyethylene and thermotropic liquid crystalline polymers (opens in a new tab)

  13. Analysis of flexible fiber suspensions using the Lattice Boltzmann method

    The characteristics of fibers suspensions depend on the properties of fibers, the suspending fluid, and fiber-fiber interactions. This thesis demonstrates the development and application of a novel coupled method (lattice Boltzmann and finite element methods) to investigate these relationships. …

    gatech Repository record for Analysis of flexible fiber suspensions using the Lattice Boltzmann method (opens in a new tab)

  14. Percolation Study Of Nano-composite Conductivity Using Monte Carlo Simulationpercolation

    … predicting electrical conductivity of carbon nanofiber composite materials. The conductive nanofibers are models as both 2D and 3D network of finite sites that are randomly distributed. The percolation behavior of the network is studied using the Monte Carlo method, which leads to the …

    ucf Repository record for Percolation Study Of Nano-composite Conductivity Using Monte Carlo Simulationpercolation (opens in a new tab)

  15. The Investigation on Fibrous Veins and Their Host from Mt. Ida, Ouachita Mountains, Arkansas

    … The vein internal fabrics are coarsely to finely fibered, with a strong host-rock grain size control on fiber width. The finest fibers are in veins with shale host and the coarsest in the coarse-grained calcareous sandstone. Fiber aspect ratio is inversely proportional to host grain size; more …

    tamu Repository record for The Investigation on Fibrous Veins and Their Host from Mt. Ida, Ouachita Mountains, Arkansas (opens in a new tab)

  16. Mechanical Property Characterization of Discontinuous Fiber Reinforced Composites by Computer Modeling

    … to predict mechanical property of discontinuous fiber reinforced composites (FRC). If we are able to foretell the mechanical property of discontinuous fiber reinforced composites (FRC), it can be used- being easy and less expensive to manufacture than continuous discontinuous fiber reinforced …

    sdstate Repository record for Mechanical Property Characterization of Discontinuous Fiber Reinforced Composites by Computer Modeling (opens in a new tab)

  17. A Study of Cure Kinetics, Microstructures, and Properties of Thermoset Composites Manufactured Through Frontal Polymerization

    … properties of both pure epoxy and carbon fiber reinforced epoxy composites. Adding short carbon fibers (SCFs) and applying process improvements, such as solvent-assisted dispersal of initiators and using silicone molds, led to better microstructural integrity, fewer voids, and lower …

    alabama Repository record for A Study of Cure Kinetics, Microstructures, and Properties of Thermoset Composites Manufactured Through Frontal Polymerization (opens in a new tab)

  18. Dynamics of Drop Impact and Infiltration into Fur-Like Structures

    … the dynamics of drop impact and liquid infiltration in fur-like fiber structures, inspired by the multiscale architecture of mammalian pelage. Using both natural fur samples and 3D-printed fiber arrays with tunable geometries, densities, wettabilities, and orientations, we characterize the …

    utk-theses Repository record for Dynamics of Drop Impact and Infiltration into Fur-Like Structures (opens in a new tab)

  19. Rebound and toughening mechanisms in steel fiber reinforced dry-mix shotcrete

    … loss due to rebound. For cases in which steel fibers are used, fiber rebound tends to be even greater at approximately 75%. This represents one of the main drawbacks to this technique and is one of the primary challenges facing the shotcrete industry today. Therefore, this work aimed at …

    ubc Repository record for Rebound and toughening mechanisms in steel fiber reinforced dry-mix shotcrete (opens in a new tab) Download PDF for Rebound and toughening mechanisms in steel fiber reinforced dry-mix shotcrete (opens in a new tab)

  20. Biocomposite Material Evaluation and Processing for Automotive Interior Components

    … focusing on bio-based composites with natural fibers being the prime choice for fiber reinforced composites. The processing and characterization of 30 wt. % industrial hemp fiber reinforced PP composites for automotive interior components are discussed. The material was compounded by a twin …

    uab Repository record for Biocomposite Material Evaluation and Processing for Automotive Interior Components (opens in a new tab)

Page 1 of 2