Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Fiber Coating"”.
-
Enhanced De-inking and Recyclability of Laser Printed Paper by Plasma-Assisted Fiber Coating
… of the fastest growing segments of the recycled fiber industry. Toner particles are rigid, insoluble and difficult to disperse and detach from fibers. Therefore papers made from recycled office waste having high toner content will contain noticeable ink particles. This work will consider an …
-
Fiber coatings and the fracture behavior of a woven continuous fiber fabric-reinforced ceramic composite
<p>Nicalon® plain-weave fiber fabric-reinforced silicon carbide (SiC) matrix composites with various fiber/matrix interface coating thicknesses have been successfully fabricated by novel forced chemical vapor infiltration (FCVI) methods. The influence of the interface coating thickness on the …
-
Nanocellulose reinforced sheet molding compound for automotive composite manufacturing
… (CNC) as reinforcement in typical glass fiber/epoxy sheet molding compounds (SMC). The hypothesis is that addition of CNC can improve the properties of the SMC composites, allowing glass fibers to be removed thus reducing the density/weight of the composite without compromising its …
-
An analysis of factors associated with the cytotoxicity of natural and man-made mineral fibers
<p>Natural and man-made mineral fibers possess physical and chemical characteristics that have been associated with cytotoxicity. Among these are fiber length, fiber width, fiber aspect ratio, and surface chemistry. This study correlated measurements of these characteristics with their respective …
-
Modeling of stress transfer in fiber-reinforced ceramic matrix composites
… to investigate the stress distribution in fiber-reinforced ceramic matrix composites (CMCs) subjected to temperature changes and uniaxial tensions. The analytical model satisfies all equations of equilibrium, all stress-strain-temperature relations, all except two boundary and interface …
-
Gas Chromatography: Mass Spectrometry of Chemical Agents and Related Interferents
… analysis. Work was done to optimize the SPME fiber coating, capillary column dimensions, and GC operating conditions to provide complete analysis within 3 minutes. Since isothermal operation of the GC was a prior requirement, many components in the chromatograms were unresolved. Therefore, a …
-
The single fiber pull-out test: a study of fiber/matrix interactions
The single fiber pull-out test was employed to experimentally model the failure of an embedded optical fiber in neat resin. The objective was to evaluate load transfer between resin and fiber through the evaluation of the sensitivity of the single fiber pull-out test to the physical parameters of …
-
Asymmetric Instability of Thin-Film Flow on a Fiber
The flow of a thin film down a vertical fiber is valuable for many industrial applications, such as fiber coating, microfluidics, heat exchangers, and desalination processes. It is well known that such flows give rise to a number of instabilities that define the bead-on-fiber morphology including …
-
Effect of Physical and Chemical Cues on Candida albicans Morphological Expression and Biofilm Formation
… in the form of nano and microscale polymeric fibers (~0.4-1.2 µm in diameter) on biofilm formation and virulence of a common HCAI-causing fungal pathogen, Candida albicans. We show that both C. albicans attachment density and differentiation to its virulent phenotype significantly vary with …
-
Mechanical properties of bio-absorbable materials
… Poly-e-caprolactone (PCL), matrices with Carbon fibers (AS4), Nylon fibers and PLLA fibers. Fiber coating effects have also been investigated, with compliant polymers (1%, 50% and 100% of matrix properties) and with hydroxyapatite (HA). Unidirectional, continuous fiber plies, and …
-
An Evaluation of Optical Fiber Strain Sensing for Engineering Applications
… which were bonded with polyimide coated optical fibers with discrete Bragg gratings. These fibers were bonded with AE-10 strain gage adhesive. The results indicate that lower strain amplitudes do not produce cause for concern, but that larger strain amplitudes (on the order of 3500 μ) may cause …
-
Zirconia Containing Bioactive Glasses and Their Coatings on Titanium Alloys: Processing, Characterization, and Simulations
… Zirconia containing bioactive glasses and their coatings on titanium alloys: processing, characterization, and simulations. Doctor of Philosophy (Materials Science and Engineering), December 2025, 229 pp., 28 tables, 69 Figures, list of publications, author biography, 311 numbered references. …
-
Evaluation and Quantification of Optic Fiber Distributed Sensor Response in Air and Water Environments
… dense experimental results for comparison. Optic fiber distributed sensors can provide the dense and accurate data desired. While this sensing technology is mature, the responses of these sensors need to be fully characterized for all experimental conditions. This study performed multiple analyses …
-
Synthesis And Characterization Of Soybean Feedstock-Based Composite Systems For Sustainable Material Application.
… of the samples, prompting the development of a fiber coating technique, leading to improved mechanical properties and water resistivity. It was reported that the PLA-coated SBM composites exhibited superior mechanical properties and lower water absorption over a 24-hour period compared to the …
-
Preparation of polymeric nanocomposites and their structure-property relationships
… nanoparticles. We were able to produce visible fiber coating depositions on substrates with uniform filler distributions along the fibers or drops. The dispersions prepared by polymerization resulted in more evenly distributed fillers along the electrospun fibers than the dispersion prepared by …
-
Detection of Illicit Drugs in Various Matrices Via Total Vaporization Solid-Phase Microextraction
… analyte into the headspace of a vial. A coated fiber is introduced into the sample headspace and the analyte is adsorbed onto the fiber coating. Total Vaporization Solid-Phase Microextraction (TV-SPME) is a technique that is derived from this technique. In TV-SPME, liquid samples are completely …
-
Simultaneous chemical and sensory characterization of VOCs and semi-VOCs emitted from swine manure using SPME and multidimensional gas chromatography-mass spectrometry-olfactometry system
… (PDMS) 85 [Mu]m SPME fibers and were analyzed using the MDGC-MS-0 system. Twenty-four-hour SPME extractions were used to improve the detection limits for semi-volatile organics and compounds with small affinity to SPME fiber coating. The MDGC-MS-0 system was equipped …
-
HYDROGEL COMPOSITIONS FOR NONVIRAL GENE DELIVERY
… of composite materials consisting of polymeric fibers with hydrogel coatings encapsulating nonviral vectors for localized gene delivery. The primary focus of this dissertation was to develop hydrogels with suitable physical/chemical properties for the localized, sustained gene delivery …
Page 1 of 2