Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 70 for “"Fiber Dispersion"”.
-
Optical Fiber Dispersion Characterization
This thesis discusses the dispersion of optical pulses in fiber waveguides. Procedures for determining the transfer function of an optical fiber using either time domain measurements or frequency domain measurements are given. A test set is described which uses time domain measurements for …
-
Temperature Effects in Optical Fiber Dispersion Compensation Modules
… Differential Group Delay (DGD) measurements of a Dispersion Compensation Module (DCM) and interprets the results with a theoretical DGD model based on glass viscoelastic properties and estimated values of some of glass parameters. The results of our analysis demonstrate the existence of long …
-
A study of micro fiber dispersion using digital image analysis
… the use of texture analysis as a tool to micro fiber dispersion measurement. Micro fiber dispersion can be found in many applications such as in paper and industry powder engineering. Three cases related to micro fiber dispersion were investigated in this study. The first case was the …
-
Optical Wavelength Measurement Based on Microwave-Photonics and Fiber Dispersion
… (MP-WMS), integrating microwave photonics with fiber chromatic dispersion to achieve direct wavelength measurement. Utilizing cost effective single mode optical fibers as dispersion devices, this system employs chromatic dispersion to convert optical frequency domain measurements into microwave …
-
Characterization of photonic crystal fiber dispersion and investigation of supercontinuum generation /
Photonic crystal fibers (PCFs) are unique media for supercontinuum generation: the ability to engineer PCF dispersion, nonlinearity, birefringence, etc. by changing structural parameters of the microstructure region has given a significant impulse to supercontinuum generation research. This …
-
The role of anisotropy and fiber dispersion in the mechanics and remodeling of biological tissues
… are determined primarily by the presence of fibers, in particular collagen. </p> <p>When an isotropic material is subject to a uniaxial tension, the principal strain transverse to the direction of applied load is always negative. However, in fiber reinforced materials the transverse principal …
-
Characterization and modeling of erbium-doped fiber amplifiers and impact of fiber dispersion on semiconductor laser noise
… design and modeling of erbium-doped fiber amplifiers (EDFAs); second is the effect of fiber dispersion on the noise of distributed feedback (DFB) lasers and the impact of this effect on the performance of 1550nm video lightwave transmission systems. A simple electrical measurement …
-
Numerical simulation studies of the effects of noise and optical-fiber distortion on wideband frequency-modulated cable television systems
In the late 1980s, the idea of using optical fiber to carry cable television (CATV) signals in analog form was first proposed and studied. The most widely employed approach today is an amplitude-modulated vestigial-side-band (AM-VSB) implementation in which the optical output of a laser is …
-
Multiscale Analysis of Fiber Organization to Predict Ligament Mechanics
… parameters from imaging data, including fiber dispersion and mean fiber orientation. Multiscale analysis of the fibrillar organization can be used to predict the mechanical behavior of these soft tissues, however the specific scale that is most relevant to the soft tissue mechanics …
-
Long Fiber Extrusion and Improved Energy Absorption Behaviour of Hybrid Thermoplastic Composite
… biocomposites of polypropylene (PP) and jute fibers (J) with high energy absorption and without decline of strength and stiffness properties. The preparation of thermoplastic composite is a challenging task; this research presents manufacturing thermoplastic biocomposite using direct long …
-
Cellulose fiber reinforced thermoplastic composites: Processing and Product Charateristics
Steam exploded fibers from Yellow Poplar (Liriodendron tulipifera) wood were assessed in terms of (a) their impact on torque during melt processing of a thermoplastic cellulose ester (plasticized CAB); (b) their fiber incorporation and dispersion characteristics in a CAB-based composite by SEM and …
-
Comprehensive Study of 1-bit Delta-Sigma Modulation in Digitized Radio over Fiber Fronthaul Systems
… in fronthaul transmission systems, radio over fiber (RoF) technology has become the most popular solution for fronthaul transmission. Current fronthaul transmission technology is based on digitized CPRI RoF transmission (CPRI- common protocol radio interface). However, the conventional CPRI RoF …
-
Machine learning equalisation techniques for future passive optical networks
… reliable, high-capacity, and low-latency fiber internet connectivity, largely replacing legacy copper cabling. Research into next generation 100 Gbit/s systems is ongoing to support future bandwidth demands, and the adoption of advanced modulation formats, such as 4-level pulse amplitude …
-
Performance of MB-OFDM ultra-wideband signals over fiber transmission using a low cost electro-absorption modulator integrated laser
… multiplexing (OFDM) ultra-wideband (UWB) over fiber transmission using a low cost electro-absorption modulator integrated laser (EML) is investigated in details. Various parameters such as fiber length, bias voltage, bias current and temperature of the EML are systematically evaluated to …
-
Impact of optical transmission on multi-band OFDM ultra-wideband wireless system with fiber distribution
The performance of MB-OFDM UWB over fiber transmission system is investigated considering optical modulation and demodulation impact. Theoretical analysis of the effect of fiber dispersion, optical transmitter and optical receiver response on system performance is carried out considering amplitude …
-
Nondestructive characterization methods for quality control of steel fiber reinforced concrete
… need to nondestructively characterize steel fiber dispersion and orientation within concrete wind-tower elements in order to ensure adequate structural capacity. This thesis documents the nondestructive testing research effort. A literature review was performed and preliminary laboratory …
-
Pre-compensation of nonlinear distortion of a silicon microring modulator in short reach systems
… performance is investigated with and without fiber transmission for a 28 Gbaud PAM-4 signal. The systematic simulation includes drive signal generation, electrical to optical conversion by the MRM model, fiber transmission, optical to electrical conversion and receiver side digital signal …
-
Short Glass Fiber Reinforced Composites Manufactured by Stereolithography
The effectiveness of manufacturing short glass fiber composites using stereolithography (SLA) was investigated. Modifications were made to a standard SLA printer to induce a flow field through the resin tank. In this study a 1/32 inch glass fiber content of 15% by volume was printed in combination …
-
Laser linearization and system considerations for AM cable TV
… and, for the first time, the impact of fiber dispersion. Laser noise cancellation by this scheme is analyzed as well. The practical implementation of a feedforward linearized optical transmitter is discussed and experimental results are presented. The results verify the theoretical …
-
Optical Time domain Reflectometry
… domain reflectometry techniques as applied to fiber optic systems. It predicts system performance for measurements of fiber breaks and discontinuities, fiber attenuation, and fiber dispersion. Two systems are shown to be needed for the two common types of future fiber systems. For single mode …
Page 1 of 4