Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Fiber Orientation Distribution"”.

  1. Electrical measurements applied to anisotropic mechanics of melt blown thin webs

    … are more easily computed theoretically using fiber-web theory since the only parameter appearing in constant-determination functions is the fiber orientation distribution function. However, no technique currently exists to measure this parameter conveniently and accurately. This Dissertation …

    utk-theses Repository record for Electrical measurements applied to anisotropic mechanics of melt blown thin webs (opens in a new tab)

  2. Modelling of diffusion-weighted MRI signals in non-neural tissue

    … of specific neural tissue features, such as fiber orientation distribution and axon diameter. However, compartment models are generally lacking for non-neural tissue. This thesis investigates compartment models of diffusion in four types of non-neural tissue (prostate, breast, spheroids and …

    vu-aus Download PDF for Modelling of diffusion-weighted MRI signals in non-neural tissue (opens in a new tab)

  3. Modeling of Microstructures and Stiffness of Injection Molded Long Glass Fiber Reinforced Thermoplastics

    … of the use of injection molded discontinuous fiber-reinforced thermoplastics. During the intensive injection molding process, severe fiber breakage arises in the plasticating stage leading to a broad fiber length distribution. Fiber orientation distribution (FOD) is another highly anisotropic …

    vt Repository record for Modeling of Microstructures and Stiffness of Injection Molded Long Glass Fiber Reinforced Thermoplastics (opens in a new tab)

  4. Dynamics of Rigid Fibers in a Planar Converging Channel

    The influence of turbulence on the orientation state of a dilute suspension of stiff fibers at high Reynolds number in a planar contraction is investigated. High speed imaging and LDV techniques are used to quantify fiber orientation distribution and turbulent characteristics. A nearly homogenous, …

    gatech Repository record for Dynamics of Rigid Fibers in a Planar Converging Channel (opens in a new tab)

  5. Advanced analysis of short-fiber polymer composite material behavior

    Short-fiber polymer composites experience widespread use in many industrial applications, where the orientation states of the short-fibers within the polymer matrix define the material properties of the composite structure. Due to the extensive use of these short fiber products, it is necessary to …

    missouri Repository record for Advanced analysis of short-fiber polymer composite material behavior (opens in a new tab)

  6. Development of nonlinear microscopy methods for biological imaging /

    … was not identical in all samples, with collagen fibers being either broken down or rearranged into more orderly structures, the latter resulting in more intense SHG. Successful tissue differentiation with SHGCD and C-ratio indicated that the out of-plane collagen fiber orientation distribution …

    vilnius Repository record for Development of nonlinear microscopy methods for biological imaging / (opens in a new tab)

  7. Mechanical properties of bio-absorbable materials

    … Poly-e-caprolactone (PCL), matrices with Carbon fibers (AS4), Nylon fibers and PLLA fibers. Fiber coating effects have also been investigated, with compliant polymers (1%, 50% and 100% of matrix properties) and with hydroxyapatite (HA). Unidirectional, continuous fiber plies, and …

    vt Repository record for Mechanical properties of bio-absorbable materials (opens in a new tab)

  8. Innovations in aligned and overmolded long fiber thermoplastic composites

    <p>Long fiber thermoplastic (LFT) composite materials are increasingly used in high performance lightweight automotive, sporting, and industrial applications. LFT composites are processed with extrusion-compression molding (ECM) and/or injection molding (IM). Melt extrusion offers unique …

    utk-theses Repository record for Innovations in aligned and overmolded long fiber thermoplastic composites (opens in a new tab)

  9. Mesostructure Reconstruction of Prepreg Platelet Molded Composite With Artificial Intelligence

    … molded composites (PPMC) are long, discontinuous fiber reinforced polymer materials. PPMC are an important subcategory of composite materials as they are processible into geometrically complex structures and can be produced via high-throughput manufacturing processes, however they have higher …

    odu Repository record for Mesostructure Reconstruction of Prepreg Platelet Molded Composite With Artificial Intelligence (opens in a new tab)

  10. Extension of the Method of Ellipses to Determining the Orientation of Long, Semi-flexible Fibers in Model 2- and 3-dimensional Geometries

    The use of fiber-reinforced polymer composites formed via injection molding is of increasing interest due to their superior mechanical properties as compared to those of the polymer matrix alone. These mechanical properties, however, are strongly dependent on the fiber length and orientation …

    vt Repository record for Extension of the Method of Ellipses to Determining the Orientation of Long, Semi-flexible Fibers in Model 2- and 3-dimensional Geometries (opens in a new tab)

  11. Processing-structure-property relationship in needle-punched nonwoven natural fiber mat composites

    Natural fibers, such as hemp and flax, are emerging as cheaper reinforcing fibers for polymer composites. Renew-ability, comparable specific properties, and biodegradability make natural fibers more attractive than glass fibers. Vacuum Assisted Resin Transfer Molding (VARTM) is widely used to …

    manitoba Repository record for Processing-structure-property relationship in needle-punched nonwoven natural fiber mat composites (opens in a new tab)

  12. Effect of process parameters and die design on the orientation of reinforcement fibers in extruded polymer composite

    … the mechanical properties of discontinuous fiber thermoplastic composites are Fiber Orientation Distribution (FOD), Fiber Length Distribution (FLD) and fiber volume fraction (Vf). During manufacturing FOD in a composite would change due to fiber rotation caused by shear flow, extensional …

    manitoba Repository record for Effect of process parameters and die design on the orientation of reinforcement fibers in extruded polymer composite (opens in a new tab)

  13. DWI Pre-Processing, Tractography and Analysis for Glioma Patients

    … was based on fractional anisotropy and fiber orientation distribution peak length. Results: TractSeg successfully computed 99.0% of the tracts for the 16 glioma patients and demonstrated indications of ability to handle the skewed brain anatomies observed in glioma patients. The …

    chalmers Repository record for DWI Pre-Processing, Tractography and Analysis for Glioma Patients (opens in a new tab)

  14. Evaluating Free Water Elimination for Tractometry in Neonatal Brains

    … and compromise the reliability of downstream fiber-orientation modeling and tractometry. Free-water elimination (FWE) may address these limitations by separating isotropic free-water signal from anisotropic tissue signal. This descriptive proof-of-concept study evaluated the effect of FWE on …

    washington Repository record for Evaluating Free Water Elimination for Tractometry in Neonatal Brains (opens in a new tab)

  15. Process-Structure-Property Relationships in 3D-Printed Epoxy Composites Produced via Material Extrusion Additive Manufacturing

    … novel deposition strategies to control filler orientation and create improved functional/structural composite materials. Despite these substantial advancements, the successful and optimal utilization of any AM technology necessitates a deeper understanding of the process-structure-property …

    utk-theses Repository record for Process-Structure-Property Relationships in 3D-Printed Epoxy Composites Produced via Material Extrusion Additive Manufacturing (opens in a new tab)

  16. High angular resolution diffusion-weighted magnetic resonance imaging: adaptive smoothing and applications

    … of brain neural connectivity in vivo by means of fiber tractography applications. Fiber tractography has emerged as a useful tool for mapping brain white matter connectivity prior to surgery or in an intraoperative setting. The advent of high angular resolution diffusion-weighted imaging (HARDI) …

    gatech Repository record for High angular resolution diffusion-weighted magnetic resonance imaging: adaptive smoothing and applications (opens in a new tab)

  17. Ultra-high Performance Fiber Reinforced Concrete In Bridge Deck Applications

    … characterization of ultrahigh performance fiber reinforced concrete (UHP-FRC) at both the microscopic and macroscopic scales. The macroscopic mechanical properties of this material are highly related to the orientation of the steel fibers distributed within the matrix. However, the fiber …

    ucf Repository record for Ultra-high Performance Fiber Reinforced Concrete In Bridge Deck Applications (opens in a new tab)

  18. Imaging 3D tissue fiber organization using optical polarization tractography

    … three-dimensional (3D), depth-resolved images of fiber organization in tissue. To validate OPT's accuracy in measuring fiber orientation, a comprehensive histology comparison study was conducted using heart tissues which are known to have a depth-dependent fiber orientation change. A systematic …

    missouri Repository record for Imaging 3D tissue fiber organization using optical polarization tractography (opens in a new tab)

Page 1 of 2