Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Fibre pull-out"”.
-
Fibre-matrix interaction in mineral-bonded composites under dynamic loading
Short fibres of different materials are used for crack bridging in strain-hardening cement-based composites (SHCC). Their mechanical properties and the fibre-matrix interphase on the micro level have a significant influence on the macroscopic component properties. Investigations on the specific …
-
Impact Behaviour of Hybrid Long Fibre Thermoplastic Composites
… arrive at a hybrid biocomposites of hemp-glass fibre-PP with high toughness. Long glass fibres are believed to increase impact strength of composites, and current literature has mainly focused on hand layup process of laminates and mats to achieve long fibres, whereas this work investigates the …
-
Creep behaviour of cracked steel fibre reinforced self-compacting concrete laminar structures
Fibre reinforced self-compacting concrete (FRSCC) is a novel type of concrete containing discrete elements, which enhance the concrete’s post-cracking properties. For structural applications, commonly, it contains short discrete steel fibres that are randomly distributed and oriented. Fibre …
-
Ductility in FRP rods for concrete reinforcement by interfacial shearing.
… protection, alternate types of steel and fibre reinforced polymer (FRP) rebar. Of these, FRP rebar appears to be the most promising. The limitation of FRP rebar is the low maximum strain and linear behaviour up to failure. Prior attempts at increasing the ductility and producing non-linear …
-
Processing and Characterisation of S-Glass Fibres and Halloysite Nanotubes for Flowable Dental Composites
… In this thesis, micro-sized short S-glass fibres and halloysite nanotubes (HNTs) are employed to serve as excellent load-carrying filler members and antibacterial agent in the dental composites. The mechanical reinforcement mechanism and the interfacial behaviours between filler and resin …
-
Μη καταστροφικός έλεγχος για τη μελέτη της συσσώρευσης βλάβης σε σύνθετα υλικά ενισχυμένα με ίνες γυαλιού, με και χωρίς την παρουσία νανοσωληνίσκων άνθρακα
… mechanisms such as interfacial sliding, fibre pull out and bridging as well as crack bifurcation and arrest; all these mechanisms are active at the nanoscale. The life monitoring is performed via the electrical resistance changes in the conductive carbon nanotube network within the …
-
Investigation of Short-Term and Long-Term Behaviour of Steel Fibre Reinforcement in Ultra-High-Performance Concrete
Ultra-high-performance fibre reinforced concrete (UHPFRC) has a great demand in production of fatigue, impact / blast resistant concrete structural element due to its high performance in tension resistance and post-cracking ductility property. The fibres, spreading discretely in UHPFRC create …
-
Crack-bridging behaviour of polymer fibres in Strain-Hardening Cement-based Composites (SHCC) subject to alternating tension-compression cyclic loading
… of its tensile properties is the addition of fibres. By addition of only one or two percent of high-performance polymer fibres to a cementitious matrix, strain-hardening can be developed under uniaxial tensile loading. Such materials yield multiple cracking and permit large inelastic …
-
Polymer impregnation and its effect on the rupture properties of leather
… increase strength. Surface properties of leather fibres were altered (using a hydrophobic agent based on a phosphate ester) to more closely match those of the polymer. This resulted in a more even distribution of polymer on the leather fibrils. Application of the hydrophobic agent alone was …
-
A Study of Glass Fibre Reinforced High Alumina Cement Composites
… chapters review the state of the art in glass fibre reinforced cement (GRC) composites: the use of high alumina cement as a matrix is probably the most practical way of ensuring component compatibility in a GRC system. Calculation of the theoretical tensile strength for different failure modes …
-
Mikromechanische Untersuchungen zur Faser-Matrix-Haftung in Faser-Kunststoff-Verbunden:
… der Einzelfaserauszugversuch (engl. single-fibre pull-out test, SFPO) und der Einzelfaserfragmentierungsversuch (engl. single fibre fragmentation test, SFFT). Bei ihrem Einsatz ist zu beachten, dass sich unterschiedliche Einflussgrößen auf ihre Ergebnisse auswirken können. In der …
-
Steel fibres from waste tyres to concrete : testing, modelling and design.
The disposal of waste tyres and steel fibres from tyres is a serious worldwide environmental problem. This thesis examines the use of steel fibres extracted from waste tyres as reinforcement for concrete. Previous attempts to use such fibres with concrete ended up in balling of the fibres and …
-
Effect of the surface roughness of fibres on the bonding capacity of the interfacial zone between the fibres and cementitious matrix
As fibre-reinforced cementitious composites (FRCC) are multi-scale materials, their structural performance depends on the micro-scale properties of the fibre-matrix bond. However, the development and utilisation of FRCC are restricted due to the limited knowledge of the micro-scale phenomena that …
-
4D printing of smart co-extruded wire-fibre polymer composites
… self-sensing. The first study demonstrates that fibre orientation and infill density can program the shape memory response of co-extruded shape memory polymer/continuous carbon fibre composites by balancing shape fixity and recovery. A cross-fibre layout at 40% infill density provides the most …
-
Characterisation of environmentally friendly fibres for composites
Throughout the past decade, Polypropylene (PP) has been used as a favoured matrix material with different fibres being used as reinforcement in automotive composites. One of the most popular fibres for reinforcing PP matrix is Glass fibre (GF) due to its strength and impact resistance. More …
-
Processing of Hemp Fibre Using Enzyme/Fungal Treatment for Composites
Hemp fibres compete very well with glass fibres in terms of their specific strength and stiffness and so can replace glass fibres as reinforcement in composites. Combining them with thermoplastics results in potentially cheap recyclable composite materials. The adhesion between the hemp fibre and …
-
Fiber Reinforced Cementitious Mortar (FRCM) systems used for strengthening of concrete beams at ambient and elevated temperatures
… study FRP as composite and the newly-developed fibre-reinforced cementitious matrices (FRCM) were considered. FRCM composites have become popular in the construction and building industry as a flexible replacement strengthening system for the old and classic composite materials (FRP). The former …
-
Advances in development of novel ultra-high performance concrete
… equipped with improved ductility as a result of fibre addition. These features make it an ideal construction material for bridge decks, storage halls, thin-wall shell structures, and other infrastructure against seismic, impact and blast loads. In the thesis, development of novel UHPC material is …
-
An analytical tool wear model for drilling of continuous fibre reinforced composites
Carbon fibre reinforced polymers (CFRP) are increasingly being used in aerospace structures due to high specific stiffness and good corrosion resistance. Drilling holes to facilitate the mechanical joining of CFRP to other, metallic components is a key operation during aircraft manufacture and high …
-
Recycling of FRP wind blade waste material in concrete
The management of thermoset glass fibre-reinforced polymer (GFRP) waste from end-of-life wind turbine blades has emerged as a significant challenge with the increasing decommissioning of these blades, in contrast to turbine metal components, which can be recycled through established methods. Blade …
Page 1 of 2