Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 56 for “"Field weakening"”.

  1. Design of permanent magnet machines for field-weakening operation

    … in terms of the iron loss, torque pulsations and field-weakening performance. It covers the investigation of the effect of stator-slot and rotor-pole number combinations for surface-mounted PM (SPM) machines, and the stator-slot and rotor-effective-slot number combinations for interior permanent …

    adelaide Repository record for Design of permanent magnet machines for field-weakening operation (opens in a new tab)

  2. “Field Weakening Operation of AC Machines for Traction Drive Applications.”

    <p>The rising cost of gasoline and environmental concerns have heightened the interest in electric/hybrid-electric vehicles. In passenger vehicles an electric traction motor drive must achieve a constant power speed range (CPSR) of about 4 to 1. This modest requirement can generally be met by using …

    utk-theses Repository record for “Field Weakening Operation of AC Machines for Traction Drive Applications.” (opens in a new tab)

  3. A segmented interior permanent magnet synchronous machine with wide field-weakening range

    … structure has very limited or zero flux-weakening capability. The flux-weakening capability of the SPM machine can be improved by using concentrated, fractional-slot stator but here well-known advantages of the sine distributed winding are needed to be compromised. In the IPM machine, …

    unsw Repository record for A segmented interior permanent magnet synchronous machine with wide field-weakening range (opens in a new tab)

  4. Variable air gap axial flux permanent magnet machine with mechanical field weakening

    Field-weakening of electrical machines enables rotational speeds to exceed the rated values. This is particularly simple in some AC machines such as induction machines where the field strength magnitudes are determined hence controlled by a component of current in the stator windings. In …

    unsw Repository record for Variable air gap axial flux permanent magnet machine with mechanical field weakening (opens in a new tab)

  5. Implementation and simulation of sensorless control and field weakening for an induction machine

    … like the well known Volt/Hertz-control. A field oriented sensorless control would make the Induction machine even more attractive from an economical and maintenance point of view, but the problem is that the flux and the speeds need to be estimated. The largest drawback with sensorless …

    chalmers Repository record for Implementation and simulation of sensorless control and field weakening for an induction machine (opens in a new tab)

  6. Design of an interior permanent magnet machine with concentrated windings for field weakening applications

    … machine with concentrated windings (CW) for field-weakening applications. The initial phase of this work involved a feasibility study and comparison with the CW surface permanent magnet machine. Subsequently a CW-IPM machine was designed and constructed with the aim of achieving a wide …

    unsw Repository record for Design of an interior permanent magnet machine with concentrated windings for field weakening applications (opens in a new tab)

  7. Design and Modelling of Axially-Laminated Interior Permanent Magnet Motor Drives for Field-Weakening Applications

    … of having a wide speed range at constant power (field-weakening range). The design and construction of a 7.5kW axially-laminated interior permanent magnet motor showing a constant-power speed range exceeding 7.5:1 is described. This result cannot be matched by any other motor type. …

    glasgow Download PDF for Design and Modelling of Axially-Laminated Interior Permanent Magnet Motor Drives for Field-Weakening Applications (opens in a new tab)

  8. Improved generation operation of an induction machine based automotive integrated starter alternator

    … conditions. This thesis proposes an improved field weakening implementation which is based on stator voltage control for maximum power extraction in generation mode. The controllers in proposed implementation included use a non-linear dynamic compensator (NDC), stator frequency decoupling and …

    unsw Repository record for Improved generation operation of an induction machine based automotive integrated starter alternator (opens in a new tab)

  9. Modeling and Design Optimization of Permanent Magnet Variable Flux Machines

    … magnets in electrical machines can improve the field-weakening performance, due to the possibility of varying their magnetic flux density using armature current pulses. As a result, these machines are named variable flux machines (VFMs). This thesis presents an analytical model for the VFM to …

    concordia Download PDF for Modeling and Design Optimization of Permanent Magnet Variable Flux Machines (opens in a new tab)

  10. Energy Management and Control of Electrical Drives in Hybrid Electrical Vehicles

    … the electrical machine. A simple and effective field weakening controller, giving fast field weakening performance is proposed. The fast field weakening performance is important in a HEV since the battery voltage undergoes rapid variations, during accelerations. In addition to this, the FWC …

    lund Repository record for Energy Management and Control of Electrical Drives in Hybrid Electrical Vehicles (opens in a new tab) Download PDF for Energy Management and Control of Electrical Drives in Hybrid Electrical Vehicles (opens in a new tab)

  11. Analysis of idle power and iron loss reduction in an interior PM automotive alternator.

    … Test results on this machine had shown good field-weakening performance but that the machine fell 16% short of the idle power requirement and had high iron losses. This thesis describes the development of a finite-element model for this machine and how it was validated using experimental test …

    adelaide Repository record for Analysis of idle power and iron loss reduction in an interior PM automotive alternator. (opens in a new tab)

  12. Performance analysis and operating limits of dual inverter open winding IPMSM drives

    … inverter drive in Maximum Torque per Ampere and Field Weakening regions. To predict the performance and operating limits of the drive systems with improved accuracy, the impact of saturation on inductances and Permanent Magnet flux linkage values are taken into account, and core, copper, friction …

    manitoba Repository record for Performance analysis and operating limits of dual inverter open winding IPMSM drives (opens in a new tab)

  13. Investigation of DC Motors for Electric and Hybrid Electric Motor Vehicle Applications Using an Infinitely Variable Transmission

    … was also conducted. These tests revealed that field weakening appears to be a viable low-costspeed-control method. Testing of these motors, coupled with an IVT revealed that the output of a differential or planetary gear set can be controlled by varying the speed of the inputs. Combining this …

    byu Repository record for Investigation of DC Motors for Electric and Hybrid Electric Motor Vehicle Applications Using an Infinitely Variable Transmission (opens in a new tab) Download PDF for Investigation of DC Motors for Electric and Hybrid Electric Motor Vehicle Applications Using an Infinitely Variable Transmission (opens in a new tab)

  14. Design and Analysis of New Concept Interior Permanent Magnet Synchronous Motor by 3D Finite Element Analysis

    … increase the output torque and be controlled for field weakening operating. The analysis has been conducted by three-dimensional Finite Element Analysis. The results show the possibility of the new motor for HEV applications. The new motor has several advantages: low manufacturing cost, low …

    ut-knoxville Repository record for Design and Analysis of New Concept Interior Permanent Magnet Synchronous Motor by 3D Finite Element Analysis (opens in a new tab)

  15. Induction Machine Flux Control during Transient Operation

    … is found that stable flux control is achieved in Field Weakening region when a field weakening controller is used. Furthermore, torque control mitigates the noticeable delay in torque production despite using active flux control during rapid and high torque demands. In these situations, additional …

    chalmers Repository record for Induction Machine Flux Control during Transient Operation (opens in a new tab)

  16. Design and Comparative Analysis of PM Traction Machines with Harmonic Current- Based Torque Ripple Reduction for Electric Truck Applications

    … torque-speed and power-speed capability, field-weakening performance, loss and efficiency behaviour, magnetic saturation, demagnetization, mechanical rotor stress, material usage, cost, and environmental impact. The results show that all three machines can meet the required traction …

    chalmers Repository record for Design and Comparative Analysis of PM Traction Machines with Harmonic Current- Based Torque Ripple Reduction for Electric Truck Applications (opens in a new tab)

  17. Design Simulation and Experiments on Electrical Machines for Integrated Starter-Generator Applications

    … merits, the inherently low power factor and poor field weakening capability makes these machines unfavourable in B-ISG applications. The second design is a wound rotor synchronous machine (WRSM). From FE analysis, a six pole geometry presents a lower loss level over four pole geometry. Torque …

    whiterose Download PDF for Design Simulation and Experiments on Electrical Machines for Integrated Starter-Generator Applications (opens in a new tab)

Page 1 of 3