Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 326 for “"Fill Factor"”.

  1. Fill Factor Losses in Organic Solar Cells

    … conversion efficiency, nearing 20 %. While fill factor improvements have accompanied material and device optimisation, further progress is still required. The fill factor is influenced by a complex interplay between recombination mechanisms - both geminate and nongeminate - and charge …

    qucosa-diss

  2. The fill factor: recombination vs. extraction in organic solar cells

    In this research we investigate the fill factor of polymer: fullerene bulk heterojunction solar cells through a novel approach. We relate the fill factor with the ratio between the rate of bimolecular recombination of free charge carriers and the extraction of free carriers at the electrode, which …

    eindhoven Repository record for The fill factor: recombination vs. extraction in organic solar cells (opens in a new tab) Download PDF for The fill factor: recombination vs. extraction in organic solar cells (opens in a new tab)

  3. A Novel Normal-To-Plane Space Efficient Micro Corner Cube Retroreflector With Improved Fill Factor

    A Corner Cube Retro-reflector (CCR) is a device that can be used as transmitters in wireless free space optical communication systems, or remote sensing instruments. A novel approach to fabricate the CCR is developed, where almost 100% of the planar chip area acts as the CCR compared to the maximum …

    usf Repository record for A Novel Normal-To-Plane Space Efficient Micro Corner Cube Retroreflector With Improved Fill Factor (opens in a new tab)

  4. High Fill Factor Perovskite Solar Cells by Temperature Control in Single and Mixed Halide Precursor Solution and Films

    … efficient charge transport, thus improving the fill factor (FF) of the cells. In this work, the role of annealing temperature on the crystallinity of perovskite (CHNH3PbI3/ CH3NH3PbI3-xClx) thin films casted from single (without PbCl2) and mixed (with PbCl2) halide precursors were studied. …

    sdstate Repository record for High Fill Factor Perovskite Solar Cells by Temperature Control in Single and Mixed Halide Precursor Solution and Films (opens in a new tab)

  5. Estimating the performance of hybrid (monocrystalline PV - cooling) system using different factors.

    … PV - COOLING) SYSTEM USING DIFFERENT FACTORSMAJOR PROFESSOR: Dr. Logan O. ParkAmbient temperature significantly affects photovoltaic (PV) panel performance. High temperature reduces PV panel efficiency, fill factor, and maximum power, driving up solar electrical system investment …

    siu-theses Repository record for Estimating the performance of hybrid (monocrystalline PV - cooling) system using different factors. (opens in a new tab)

  6. Optical Load Detection: Load Weighing for Construction Machines using Stereo Vision and Convolutional Neural Networks

    … and weight of the handled material through fill-factor estimation. The methodology is based on depth data and images captured by a stereo camera, mounted on the machines. By using a region-based convolutional neural network (CNN), localization of material and fill-factor estimation are …

    chalmers Repository record for Optical Load Detection: Load Weighing for Construction Machines using Stereo Vision and Convolutional Neural Networks (opens in a new tab)

  7. ADVANCED METALLISATION METHODS FOR MONOCRYSTALLINE SILICON WAFER SOLAR CELLS

    … significantly influences the cells? fill factor, a fill factor loss analysis method is developed. Then, the influence of an alkaline surface texture on silicon homojunction cell metallisation is evaluated using an advanced statistical approach. Thickening of printed silver electrodes …

    nus Repository record for ADVANCED METALLISATION METHODS FOR MONOCRYSTALLINE SILICON WAFER SOLAR CELLS (opens in a new tab) Download file for ADVANCED METALLISATION METHODS FOR MONOCRYSTALLINE SILICON WAFER SOLAR CELLS (opens in a new tab)

  8. High growth rate deposition of hydrogenated amorphous silicon-germanium films and devices using ECR-PECVD

    … The device we made with 1.47 eV band gap has a fill factor of 64.5%. With the graded band gap and graded doping techniques, 70% fill factor was achieved when the band gap was graded from 1.75 to 1.47 eV. We also got 68% fill factor with the band gap graded from 1.75 to 1.38 eV.</p>

    iastate Repository record for High growth rate deposition of hydrogenated amorphous silicon-germanium films and devices using ECR-PECVD (opens in a new tab)

  9. Pixel detector with exotic sensors: device characterisation, analysis, and application

    … solution to solve issues with the low fill factor in the conventional LGAD. These detectors are produced as pad detectors of various pixel sizes and doping concentrations for testing. The pixelated version of the 250 µm thick iLGAD and an earlier iteration of a 200 µm LGAD are bonded to …

    glasgow Repository record for Pixel detector with exotic sensors: device characterisation, analysis, and application (opens in a new tab) Download PDF for Pixel detector with exotic sensors: device characterisation, analysis, and application (opens in a new tab)

  10. Simplification of high graphene/n-Si Schottky junction solar efficiency

    … to simplify the creating process to improve the fill factor and stability of devices. This doctoral study will focus on various phases of the progression of graphene/silicon solar cells toward greater efficiency and stability. The study will discuss the simplicity of top-window-structured …

    plymouth Repository record for Simplification of high graphene/n-Si Schottky junction solar efficiency (opens in a new tab)

  11. Modeling solar cells with recombination

    … characteristics with an associated ideality factor, whose value determines the importance of recombination processes, and (2) a more advanced expression that includes a recombination current. It is shown that the simplified empirical expression is overly simplified and that its use leads to …

    ubc Repository record for Modeling solar cells with recombination (opens in a new tab) Download PDF for Modeling solar cells with recombination (opens in a new tab)

  12. Copper diffusion through plated nickel barrier layers for laser-doped selective-emitter silicon solar cells

    … Significant degradations in cell efficiency, fill factor and open-circuit voltage were observed for LDSE cells with electroless-plated nickel barrier layers after heating at 200 °C and subsequent quenching in ethylene glycol. In the worst case, the fill factor was reduced from 66% to 31%, …

    unsw Repository record for Copper diffusion through plated nickel barrier layers for laser-doped selective-emitter silicon solar cells (opens in a new tab)

  13. Study on organic-dye sensitized photoelectrochemical solar cells

    … device to convert solar energy. The dye is a key factor, responsible for the capturing of sunlight. This work is about the assembly of a DSSC with an organic dye and a PAN based gel electrolyte. The performance of the cells and of the electrolytes has been investigated with the help of complex …

    chalmers Repository record for Study on organic-dye sensitized photoelectrochemical solar cells (opens in a new tab)

  14. The Effect of Laser Enhanced Contact Optimization (LECO) on Copper (Cu) Contacted p-Passivated Emitter and Rear Contact (p-PERC) Silicon Solar Cells

    … high Open Circuit Voltage (Voc) and pseudo fill factor (pFF), parallelly ensuring a low-resistance metal- semiconductor ohmic contact to minimize contact resistance and maximize the fill factor (FF). This classic tradeoff is a critical challenge, which is being explored with the help of LECO …

    gatech Repository record for The Effect of Laser Enhanced Contact Optimization (LECO) on Copper (Cu) Contacted p-Passivated Emitter and Rear Contact (p-PERC) Silicon Solar Cells (opens in a new tab)

  15. The impact of deliberate sodium incorporation on CuInSe2-based solar cells

    … sodium concentration are open-circuit voltage, fill factor, and dopant density. CuInSe2 thin films and photovoltaic devices are analyzed to determine how much sodium is needed to improve device performance, and to uncover the effect of sodium at grain boundary surfaces and in the bulk material. …

    colostate Repository record for The impact of deliberate sodium incorporation on CuInSe2-based solar cells (opens in a new tab)

  16. Nickel Silicide as a Contact and Diffusion Barrier for Copper Metallization in Silicon Photovoltaics

    … stress tests of the degradation of the pseudo-fill factor (pFF) and quantum efficiency (QE) to assess the capabilities of the NiSi diffusion barrier. Best contact resistivities of 7.3e-6 Ohm-cm2 with NiSi only and 4.0e-5 Ohm-cm2 with NiSi/Cu/TiN were measured. Even following a week of …

    rit Repository record for Nickel Silicide as a Contact and Diffusion Barrier for Copper Metallization in Silicon Photovoltaics (opens in a new tab)

  17. FEA study of proximity effect in hairpin windings of a PMSM for automotive applications

    … copper bars in order to achieve a high fill factor. This has beneficial e˙ects for thermal properties and also gives an increased power density. However, the larger cross sectional area increases the frequency dependant eddy current loss. The conventional machine winding using round …

    chalmers Repository record for FEA study of proximity effect in hairpin windings of a PMSM for automotive applications (opens in a new tab)

  18. Fabrication and performance of broad-area high power narrow linewidth semiconductor laser diodes

    … nm using designs with varying grating order and fill factor, are fabricated at the Holonyak Micro and Nanotechnology Laboratory cleanroom using standard i-line optical lithography. Alternative lithography techniques are proposed without reliance on small feature definitions by electron-beam …

    uiuc Repository record for Fabrication and performance of broad-area high power narrow linewidth semiconductor laser diodes (opens in a new tab)

  19. Improved System for Fabrication and Characterization of Nanophotonic Devices by Multi-photon Lithography

    … of the ULPCs was also measured as a function of fill factor. The ULPC having a fill factor of 48% exhibited 80% transmission. An etching process was also developed for non-destructively removing Au/Pd coatings that must be deposited onto structures to image them by scanning electron microscopy. …

    ucf Repository record for Improved System for Fabrication and Characterization of Nanophotonic Devices by Multi-photon Lithography (opens in a new tab)

  20. Effects of front and bottom texturings on gallium arsenide solar cell characteristics

    … were studied, in particular their effects on the fill factor, open circuit voltage and the short circuit currents were analyzed. Silvaco, an industry standard simulation suite was used for the design and analysis of the various texturing for the GaAs solar cell. In this thesis, five different cell …

    missouri Repository record for Effects of front and bottom texturings on gallium arsenide solar cell characteristics (opens in a new tab)

Page 1 of 17