Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 189 for “"Film quality"”.
-
Impact of doping on epitaxial Ge thin film quality and Si-Ge interdiffusion
… different applications, the requirements on Ge film quality and Ge/Si interface interdiffusion are different. Si-Ge interdiffusion during high-temperature growth or fabrication steps changes the distribution of Ge and increases atomic intermixing, which degrades device performance. However, …
-
Hall measurement-based study of ferromagnetic thin films stimulated by the idea of spin-orbit torque
… the fabrication and assessment of tungsten films for their viability in SOT applications. Employing sheet resistance measurements via Van der Pauw's 4-point method, tungsten films exhibit varying resistivity based on thickness, suggesting the presence of distinct phases. The investigation …
-
Surface reaction mechanisms during the atomic layer deposition of silicon-based dielectrics
… layer deposition (ALD) of Si-based dielectric films for applications such as sidewall spacers in multiple patterning. In this work, we have primarily focused on understanding the surface reaction mechanisms during the ALD of Si-based dielectric films using in situ attenuated total reflection …
-
Understanding Film Formation Mechanisms of Sequential Solution-Processed Perovskite for Solar Cell Applications
… focuses on developing deeper understandings of film formation mechanisms of sequential processed mixed-cation perovskites and the role of chlorine (Cl)-additives for such films with the aim of improving film quality and therefore the performance of associated solar devices. Firstly, a dynamic …
-
CAFM Studies of Epitaxial Lateral Overgrowth GaN Films
… (CAFM) to study defect sites on GaN films. In particular, these defect sites demonstrate current leakage under reverse-bias conditions that are detrimental to device fabrication. Two growth techniques that were used to improve this leakage behavior for samples in this study included: …
-
Characterization of polycrystalline silicon films grown by LPCVD of silane
… is a common technique for creating polysilicon films for a variety of applications. The deposition temperature and pressure greatly influence parameters relating to growth rate and film quality. These characteristics include film crystallinity and resulting grain orientation that determine the …
-
Quality, Microstructural Refinement and Stability of Atomic-layer-deposited Aluminum Nitride and Aluminum Oxide Films
High-quality, stable ALD films are required in microelectronics when the films are exposed to further processing during device manufacturing, or if the films are exposed to a demanding environment. For example, front-end-of-line processing exposes the deposited materials to high temperatures and …
-
Electrical characterization of thick film superconductors
… used successfully, they must be characterized. Film quality was characterized by measuring the electrical properties under different conditions. Films were tested on alumina and magnesia substrates, to characterize the substrate interactions. Films were printed in different thicknesses and …
-
Evaluating Coal-Derived Pyrolyzed Chars as Carbon Sources for Graphitic Film Growth
… vapor deposition (CVD) of graphitic carbon films. Two types of char were examined: low-temperature (LT) char produced at 600 degrees C and ultra-high temperature (UHT) char formed at approximately 3000 degrees C. Both were compared to methane-based control runs to evaluate how pyrolysis …
-
Evaluating Coal-Derived Pyrolyzed Chars as Carbon Sources for Graphitic Film Growth
… vapor deposition (CVD) of graphitic carbon films. Two types of char were examined: low-temperature (LT) char produced at 600 degrees C and ultra-high temperature (UHT) char formed at approximately 3000 degrees C. Both were compared to methane-based control runs to evaluate how pyrolysis …
-
Evaluating Coal-Derived Pyrolyzed Chars as Carbon Sources for Graphitic Film Growth
… vapor deposition (CVD) of graphitic carbon films. Two types of char were examined: low-temperature (LT) char produced at 600 degrees C and ultra-high temperature (UHT) char formed at approximately 3000 degrees C. Both were compared to methane-based control runs to evaluate how pyrolysis …
-
Evaluating Coal-Derived Pyrolyzed Chars as Carbon Sources for Graphitic Film Growth
… vapor deposition (CVD) of graphitic carbon films. Two types of char were examined: low-temperature (LT) char produced at 600 degrees C and ultra-high temperature (UHT) char formed at approximately 3000 degrees C. Both were compared to methane-based control runs to evaluate how pyrolysis …
-
Evaluating Coal-Derived Pyrolyzed Chars as Carbon Sources for Graphitic Film Growth
… vapor deposition (CVD) of graphitic carbon films. Two types of char were examined: low-temperature (LT) char produced at 600 degrees C and ultra-high temperature (UHT) char formed at approximately 3000 degrees C. Both were compared to methane-based control runs to evaluate how pyrolysis …
-
Evaluating Coal-Derived Pyrolyzed Chars as Carbon Sources for Graphitic Film Growth
… vapor deposition (CVD) of graphitic carbon films. Two types of char were examined: low-temperature (LT) char produced at 600 degrees C and ultra-high temperature (UHT) char formed at approximately 3000 degrees C. Both were compared to methane-based control runs to evaluate how pyrolysis …
-
An investigation into carbon intermediate layer at CZTS/Mo back contact and the effect of RTP conditions on CZTS-based thin film solar cells
… the most promising absorber materials for thin film solar cells, due to its merits like earth abundant and low-toxic constituents, and good optical-electrical properties (high absorption coefficient of above 104 cm-1 and adjustable bandgap). Improving CZTS thin film quality and optimising the …
-
Pulsed Laser Deposition of Iron Selenide Heterostructures Guided by Laser-Plasma Simulations and Experiments
… the plasma properties in order to improve film quality and enable unique growth configurations. A model for laser ablation has also been developed and is directly compared to experiments. The combination of plasma diagnostics and simulations can make PLD a powerful, well-controlled platform …
-
Advancing the Industrialization of Thin Film Deposition: Tools for Mitigating Powder Formation in Spatial-ALD Systems and for Real-time, In-situ Metrology
Thin-film manufacturing through Spatial Atomic Layer Deposition (SALD) offers high throughput and cost-saving advantages, but challenges such as powder formation and the lack of real-time in-situ metrology hinder its industrial-scale viability. This thesis focuses on improving the reliability of …
-
Amorphous Organic Molecular Glasses for Photovoltaic Applications
… However, achieving a smooth and homogenous film morphology without disturbing the optical and electronic properties of the active layer remains a crucial challenge to overcome for developing small-molecule materials. Strong molecular forces between conjugated small molecules can result in …
-
Novel Semi-Conductor Material Systems: Molecular Beam Epitaxial Growth and Characterization
… I also characterized iron silicon germanide films using extended x-ray absorption fine structure (EXAFS) to reveal phase, semi-conducting behavior, and to calculate nearest neighbor distances. The choice of these silicides material systems was due to their theoretically predicted and/or …
Page 1 of 10