Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 46 for “"Fine Particle Fraction"”.

  1. A STUDY ON PARTICLE SURFACE ROUGHNESS AND ITS IMPACT ON TABLET AND INHALER TECHNOLOGY

    … flow during tableting was studied using lactose particles of different surface roughness. Rougher particles had higher rearrangement energy requirement during tableting, decreasing the energy available for bond formation. The effects of roller compaction on materials of different deformation …

    nus Repository record for A STUDY ON PARTICLE SURFACE ROUGHNESS AND ITS IMPACT ON TABLET AND INHALER TECHNOLOGY (opens in a new tab) Download file for A STUDY ON PARTICLE SURFACE ROUGHNESS AND ITS IMPACT ON TABLET AND INHALER TECHNOLOGY (opens in a new tab)

  2. Advanced Powder Characterization Techniques for Inhalation Powder Mixtures

    … drug to reach the lower regions of the lungs, particles need to exhibit an aerodynamic size below 5 μm. While the drug can be processed by various techniques to achieve sizes in the desired range, micronized powders are strongly cohesive, therefore tend to aggregate, and show poor flowability. …

    cau-kiel Repository record for Advanced Powder Characterization Techniques for Inhalation Powder Mixtures (opens in a new tab)

  3. Rapid prediction of milk powder quality by hyperspectral imaging

    … and potentially affected by variation in particle size distribution. Therefore, commercial-grade IWMP was divided into three discrete fractions of varying particle size. These three fractions were coarse (“C”, having particles of 355μm or higher); medium (“M”, having particles smaller than …

    auckland-ms Repository record for Rapid prediction of milk powder quality by hyperspectral imaging (opens in a new tab)

  4. Clarithromycin nanocrystals for high-dose inhalation

    … by wet media milling. Spray-dried hollow microparticles, so called "Trojan particles", in which nanocrystals are incorporated in a matrix shell are designed for deep-lung deposition while retaining good flow and dispersion. Hydroxypropyl methylcellulose (HPMC) served as a dual-function …

    cau-kiel Repository record for Clarithromycin nanocrystals for high-dose inhalation (opens in a new tab)

  5. Thermoanalytische Methoden zur Abschätzung der Stabilität von Komponenten zur Pulverinhalation

    … lactose have been investigated in terms of their fine particle fraction (FPF). Low dosed powder formulations show that the FPF distinctively improves if a pre- mixture has been pre-stored at 58% RH and 75% RH, respectively, and subsequently been mixed with ipratropium bromide.

    cau-kiel Repository record for Thermoanalytische Methoden zur Abschätzung der Stabilität von Komponenten zur Pulverinhalation (opens in a new tab)

  6. Trehalose physicochemical characteristics as a potential dry powder inhalation carrier for optimized aerosol generation

    The study aims to utilize trehalose particles as an inert fine carrier to improve DPI aerosolization performance, diversify the potential delivery of new drugs in DPI formulations and the feasibility of bringing high drug dose into the lungs. Inhalable fine trehalose particles were engineered by …

    cau-kiel Repository record for Trehalose physicochemical characteristics as a potential dry powder inhalation carrier for optimized aerosol generation (opens in a new tab)

  7. Controlled release in inhalation

    … spray dried powders, with in vitro respirable fractions (Fine particle fraction, FPF: F < 5µm) exceeding 80% of the total dose. The second experimental chapter introduces the biocompatible polymer chitosan (mw 190 – 310 kDa) to formulations containing leucine with findings of increased FPF with …

    aston Download PDF for Controlled release in inhalation (opens in a new tab)

  8. Understanding interparticle interactions in dry powder inhalation

    … therefore dose metering and dispersibility. Interparticle interactions between carrier and drug govern aerosolisation behaviour of the blend and consequently the efficacy of the drug deposition in the lungs. These interactions, for their part, are influenced by a variety of factors including …

    cau-kiel Repository record for Understanding interparticle interactions in dry powder inhalation (opens in a new tab)

  9. Particle-particle interactions between tailored mannitol carrier particles and drug particles for inhalation

    … asthma or chronic obstructive pulmonary disease. Particles for lung penetration require aerodynamic particle sizes between 0.5 µm and 5.0 µm to provoke an effect. Dry powder formulations as used in this project provide improved long term stability when compared to liquid formulations. The …

    cau-kiel Repository record for Particle-particle interactions between tailored mannitol carrier particles and drug particles for inhalation (opens in a new tab)

  10. Μίγματα συστημάτων χορήγησης δραστικών ουσιών ως πιθανή στρατηγική για τη βελτίωση της αεροδυναμικής συμπεριφοράς ξηρών κόνεων προς εισπνοή.

    … με αεροδυναμική διάμετρο μικρότερη από 5μm (Fine Particle Fraction), τα ρεολογικά χαρακτηριστικά καθώς και η ομοιομορφία περιεχομένου των δραστικών συστατικών στα μίγματα. Επιβεβαιώθηκε η επίδραση της λευκίνης και του πολυμερούς στην αποδέσμευση των δραστικών συστατικών. Η ενσωμάτωση της …

    athens Repository record for Μίγματα συστημάτων χορήγησης δραστικών ουσιών ως πιθανή στρατηγική για τη βελτίωση της αεροδυναμικής συμπεριφοράς ξηρών κόνεων προς εισπνοή. (opens in a new tab)

  11. Pulmonary delivery of brittle matrix powders produced by thin film freezing

    … TFF processed TAC formulations exhibited a fine particle fraction (FPF) of 83.3% and a mass median aerodynamic diameter (MMAD) of 2.26 µm. Single dose 24-h pharmacokinetic studies in rats demonstrated that the TAC formulation prepared by TFF exhibited higher pulmonary bioavailability with a …

    texas Repository record for Pulmonary delivery of brittle matrix powders produced by thin film freezing (opens in a new tab)

  12. Expanding the Performance and Functionality of Air-Jet Dry Powder Inhalers Across Multiple Applications

    … aim focused on the development of a custom small-particle spray drying system capable of integrating vibrating mesh nebulizer technologies in various configurations for the production of excipient enhanced growth (EEG) formulations. This flexible system enabled efficient production of both small- …

    vcu Repository record for Expanding the Performance and Functionality of Air-Jet Dry Powder Inhalers Across Multiple Applications (opens in a new tab)

  13. The effects of chromated copper-arsenate (CCA) pressure-treated wood on local sediments and benthos in a freshwater lake

    … lake in Wayne, NJ, were sieved to remove the fine particle fraction (<70um) which was then analyzed for the metals of concern. Benthic organisms were sampled at the same locations, enumerated, identified, dried and also analyzed for the metals in question. Analysis of sediment metal …

    njit Repository record for The effects of chromated copper-arsenate (CCA) pressure-treated wood on local sediments and benthos in a freshwater lake (opens in a new tab)

  14. Inhaled clofazimine delivery for the treatment of pulmonary tuberculosis

    … aerodynamic diameter of 3.2 µm and highest fine particle fraction of 47% which was attributed to spherical particle morphology and low aggregation tendency observed in this formulation. Minimum inhibitory concentration (MIC) of this formulation was comparable to that of unformulated …

    creighton Repository record for Inhaled clofazimine delivery for the treatment of pulmonary tuberculosis (opens in a new tab)

  15. Phenolic compounds particle engineering and formulation with dense gas technology.

    … the targeted site of delivery. In this study, particle engineering and formulation were applied to phenolic compound of curcumin for development composite products. Derived compound of cyclodextrins; hydroxypropylated and methylated beta cyclodextrins, and water soluble polymer of …

    unsw Repository record for Phenolic compounds particle engineering and formulation with dense gas technology. (opens in a new tab)

  16. Influence of engineered particulate lactose on the performance of DPI formulations

    … Lactose is the commonly used carrier particle for DPI formulations. Although it was widely believed that carrier particles with smaller diameters were preferable to maximize aerosolization efficiency (the ability of the drugs to be delivered to the lung), it was found recently that …

    texas Repository record for Influence of engineered particulate lactose on the performance of DPI formulations (opens in a new tab)

  17. Surface topography of lactose carrier and its influence on drug delivery of dry powder inhalers

    … on the surface roughness of the carrier particle. It has been reported that the adhesion forces between drug particles and rougher carrier surfaces are stronger, thereby resulting in poorer detachment of drug from the carrier surfaces and less drug delivered into the target regions of the …

    nus Repository record for Surface topography of lactose carrier and its influence on drug delivery of dry powder inhalers (opens in a new tab) Download file for Surface topography of lactose carrier and its influence on drug delivery of dry powder inhalers (opens in a new tab)

  18. Development and in vivo Analysis of Inhaled Clofazimine for the Treatment of Pulmonary Tuberculosis

    … drug content, hydrodynamic and aerodynamic particle size distribution, antibacterial efficacy, cytotoxicity, and solubility. Moreover, formulations were also characterized for their solid state and particle morphology. Lead formulation was dosed in BALB/c mice to analyze the amounts of …

    creighton Repository record for Development and in vivo Analysis of Inhaled Clofazimine for the Treatment of Pulmonary Tuberculosis (opens in a new tab)

  19. Overcoming challenges of solid dosage formulation development by using emerging technologies

    … Aerosol performance, which can be indicated by fine particle fraction and mass median aerodynamic diameter, is one of the most important factors when developing inhaled dry powder. In this chapter, we first obtained a tabular dataset containing formulation information and processing condition, …

    texas Repository record for Overcoming challenges of solid dosage formulation development by using emerging technologies (opens in a new tab)

Page 1 of 3