Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Finish Turning"”.

  1. Experimental Analysis of Finish Turning of Inconel 617

    … the surface integrity and tool life for turning of Inconel 617 for use in next-generation nuclear applications. Various machining parameters are tested to improve the finish and tool life such as the feed rate, cutting speed, and depth of cut. While the machining of popular Inconel …

    mcmaster Repository record for Experimental Analysis of Finish Turning of Inconel 617 (opens in a new tab)

  2. Parent Material Surface Deposits Origin in Finish Turning Operations of the Powder Processed Nickel Based Superalloy RR1000

    … surface deposits, often denoted as pick-up, on finish turned advanced nickel based superalloy RR1000 has been investigated. Three types of pick-up were defined: streaks of chip residue producing relatively low surface roughness changes, minor pick-up deposits ranging in length from 10-100 μm, …

    whiterose Download PDF for Parent Material Surface Deposits Origin in Finish Turning Operations of the Powder Processed Nickel Based Superalloy RR1000 (opens in a new tab)

  3. Investigation of the High-Speed Finish-Turning of Ti-5Al-5V-5Mo-3Cr Using Novel Mono/Bi-layered PVD-Coated WC Tools

    … there is a noticeable lack of research on finish turning Ti-5553 with coated carbide tools. This thesis aims to fill that void by thoroughly investigating the tool life and micromechanical performance of new mono/bi-layered PVD-coated WC tools under high-speed finish turning in wet …

    mcmaster Repository record for Investigation of the High-Speed Finish-Turning of Ti-5Al-5V-5Mo-3Cr Using Novel Mono/Bi-layered PVD-Coated WC Tools (opens in a new tab)

  4. MACHINABILITY ANALYSIS OF ALUMINUM-CAST IRON (AlSi-GCI) BIMETALLIC COMPONENTS THROUGH EXPERIMENTAL AND NUMERICAL STUDIES

    … to study the machinability of the dry finish turning of an AlSi-GCI (JIS ADC 12- ASTM A48 class 40) bimetallic workpiece with CBN cutting tools by studying tool life, wear behaviour, cutting forces, and workpiece surface roughness. This involved the development of a novel experimental …

    mcmaster Repository record for MACHINABILITY ANALYSIS OF ALUMINUM-CAST IRON (AlSi-GCI) BIMETALLIC COMPONENTS THROUGH EXPERIMENTAL AND NUMERICAL STUDIES (opens in a new tab)

  5. Performance Evaluation of CBN Tools in High-Speed Dry Turning of AISI 1018 Low Carbon Steel

    … process, which, results in poor surface finish and short tool life. The high-speed-machining technique can be used to reduce the BUE formation and realize an increase in productivity. Cubic boron nitride (CBN) tools are most commonly used in hard turning and cast-iron machining at high …

    mcmaster Repository record for Performance Evaluation of CBN Tools in High-Speed Dry Turning of AISI 1018 Low Carbon Steel (opens in a new tab)

  6. Structure-Property Evaluation of CrN Coatings Developed for BUE Dominated High-Speed Machining Applications

    … CrN-coated WC tools were carried out during dry finish turning of SS 304. Additionally, high temperature coating characterization was performed for the best-performing in house deposited coating (nitrogen gas pressure of 4 Pa, bias voltage of -50 V) and a commercial coating, up to 450°C. The …

    mcmaster Repository record for Structure-Property Evaluation of CrN Coatings Developed for BUE Dominated High-Speed Machining Applications (opens in a new tab)

  7. Piezoelectric tool actuator for precision turning

    … tool/actuator designed for the precision turning of cylindrical shafts. The piezo tool actuator has four fundamental components. The piezo stack element delivers a dynamic displacement range of 40 μm when 0 to -1000V voltage is applied. The piezo element is placed in a mechanical housing …

    ubc Repository record for Piezoelectric tool actuator for precision turning (opens in a new tab) Download PDF for Piezoelectric tool actuator for precision turning (opens in a new tab)

  8. Development of Self-Adaptive PVD Coatings for Machining TI6Al4V Alloy

    … feed -0.15 mm/rev, and depth of cut – 2 mm) and finish (cutting speed - 150 m/min, feed -0.1225 mm/rev, and depth of cut – 0.25 mm) turning of Ti6Al4V alloy. Detailed experimental studies were performed to study the effectiveness of the coatings during machining. Micro-mechanical characteristics …

    mcmaster Repository record for Development of Self-Adaptive PVD Coatings for Machining TI6Al4V Alloy (opens in a new tab)

  9. Coating Development for High-Speed Turning of Stainless Steel Addressing Combined Wear Mechanism

    … novel compositions of adaptive PVD coatings for turning stainless steel, thereby cutting production costs, and improving product quality. The focus of this research was on a new generation of self-adaptive PVD coating designs and the use of these features to address machining issues during the …

    mcmaster Repository record for Coating Development for High-Speed Turning of Stainless Steel Addressing Combined Wear Mechanism (opens in a new tab)

  10. Development of a Surface Roughness Prediction & Optimization Framework for CNC Turning

    … is one of the most important outcomes in finish machining processes due to it’s direct impact on the functionality and lifespan of components in their intended applications. Several factors contribute to the creation of Ra in machining including, but not limited to, the machining …

    mcmaster Repository record for Development of a Surface Roughness Prediction & Optimization Framework for CNC Turning (opens in a new tab)

  11. Otimização do torneamento de acabamento a seco e com MQL nas ligas de alumínio 6082-T6 e 7075-T6 utilizando Box-Behnken design

    A usinagem de acabamento ocupa um papel importante quando a superfície é de alumínio. As ligas de alumínio possuem características que as tornam, em determinadas aplicações, ótimas substitutas do aço, pois além de menor peso específico, pode também agregar boas características químicas, mecânicas e …

    brazil-ufrgs Repository record for Otimização do torneamento de acabamento a seco e com MQL nas ligas de alumínio 6082-T6 e 7075-T6 utilizando Box-Behnken design (opens in a new tab)

  12. Volba a optimalizace řezných podmínek pro progresivní výrobní technologie

    Tato práce obsahuje teoretický rozbor volby a optimalizace řezných podmínek pro současné proces obrábění se zaměřením na dokončovací proces soustružení. Dále byla pozornost zaměřena na vliv řezných podmínek a jiných vlivů na požadovanou kvalitu a drsnost obrobeného povrchu. V experimentální části …

    brno-tech Repository record for Volba a optimalizace řezných podmínek pro progresivní výrobní technologie (opens in a new tab)