Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 243 for “"Finite Element (FE) Models"”.

  1. Non-destructive Evaluation of Space Shuttle Thermal Protection System Tile Bond Integrity

    … protection system (TPS) tile bond integrity. Finite element (FE) models for tile systems were developed and were used to generate their vibration characteristics (i.e. natural frequencies and mode shapes). Various TPS tile assembly configurations as well as different bond conditions were …

    ucf Repository record for Non-destructive Evaluation of Space Shuttle Thermal Protection System Tile Bond Integrity (opens in a new tab)

  2. Strengthening Beams using FRCM Machine Learning Approach and Numerical Models

    … associated with both experimental and numerical models by providing a comprehensive model capable of predicting the response of FRCM-strengthened beams. The model considers various factors, including mechanical and geometric properties of the beams, steel reinforcement, and characteristics of the …

    carleton Repository record for Strengthening Beams using FRCM Machine Learning Approach and Numerical Models (opens in a new tab)

  3. Numerical investigation of lateral behaviour of a large pile group supporting an LNG tank

    … by a p-multiplier to account for the group effects. Alternatively, an average p-multiplier known as a group reduction factor (GRF) can be used. Chapter 1 details the study of using 3D continuum finite element (FE) models to measure the group effects in large pile groups using p-multipliers and …

    uvic Repository record for Numerical investigation of lateral behaviour of a large pile group supporting an LNG tank (opens in a new tab)

  4. Vertical stiffness characterization of a geocomposite drainage layer for PCC highway pavements

    … plate bearing tests, as well as to results of Finite Element (FE) models. Good compatibility was shown between plate deflections calculated theoretically and those obtained using the Finite Element method.

    wvu Repository record for Vertical stiffness characterization of a geocomposite drainage layer for PCC highway pavements (opens in a new tab)

  5. Modeling and simulation of tool induced soil resistance with application to excavator machine

    … at the tool during digging. Even though many different finite element (FE) models have been developed in the past to study soil-tool interaction process, there is still needs to study the effects of soil-tool friction coefficient. The main objective of this thesis is to utilize finite element …

    manitoba Repository record for Modeling and simulation of tool induced soil resistance with application to excavator machine (opens in a new tab)

  6. Finite element modeling of hybrid-fiber ECC targets subjected to impact and blast

    This dissertation describes the three-dimensional Finite Element (FE) models of hybrid-fiber Engineered Cementitious Composites (ECC) targets subjected to high- and low-velocity impacts as well as blast loading. In the high- and low velocity impacts studies using LS-DYNA FE package, a reasonably …

    nus Repository record for Finite element modeling of hybrid-fiber ECC targets subjected to impact and blast (opens in a new tab) Download file for Finite element modeling of hybrid-fiber ECC targets subjected to impact and blast (opens in a new tab)

  7. Evaluation of the approximations involved in analyzing high rate shear experiments of brain tissue using finite element analysis

    The results of brain tissue finite element (FE) models under high rate shear deformation are affected by several factors. This thesis evaluated the effects of hourglass control, Poisson's ratio and element type in such simulations. Moreover, a comparison of FE and analytical models were performed …

    temple Repository record for Evaluation of the approximations involved in analyzing high rate shear experiments of brain tissue using finite element analysis (opens in a new tab)

  8. Validation of Finite Element Beam Models

    Finite Element (FE) methods these days are becoming very popular to predict the responses of structures in industries, such as the aerospace and automobile industries. When there is a new design or modification of an existing design, the product must be tested to fulfill the criterion projected by …

    odu Repository record for Validation of Finite Element Beam Models (opens in a new tab)

  9. Experimental Validation of Finite Element Predicted Bone Strain in the Human Metatarsal

    … of this study was to verify and validate a finite element modeling routine for the human metatarsal, which is a common location for stress fractures. Experimental strain measurements on 33 human cadaveric metatarsals subject to cantilever bending were compared with strain predictions from …

    calgary Repository record for Experimental Validation of Finite Element Predicted Bone Strain in the Human Metatarsal (opens in a new tab)

  10. Mapping Anisotropy of the Proximal Femur for Improved Image-Based Finite Element Analysis

    Finite element (FE) models of bone derived from clinical quantitative computed tomography (QCT) rely on realistic material properties to accurately predict patient-specific bone strength in vivo. QCT cannot resolve microarchitecture, therefore QCT-based FE models lack the directionality apparent …

    calgary Repository record for Mapping Anisotropy of the Proximal Femur for Improved Image-Based Finite Element Analysis (opens in a new tab)

  11. Finite element model updating of exponential non-viscous damping systems

    Finite element (FE) models are mathematical representations that simulate the physical behavior of various engineering systems. The majority of engineering structural models employ viscous damping due to its mathematical simplicity. However, significant differences can exist between the actual …

    gatech Repository record for Finite element model updating of exponential non-viscous damping systems (opens in a new tab)

  12. Evaluation of machine-learning models for load-carrying capacity assessment of components of light metal structures

    … sheeting under wind uplift. To begin, nonlinear finite element models are developed and validated using experimental tests reported in existing literature. The validated finite element (FE) models are then utilized to train machine learning models such as Deep belief network (DBN) and eXtreme …

    auckland-ms Repository record for Evaluation of machine-learning models for load-carrying capacity assessment of components of light metal structures (opens in a new tab)

  13. Design and spectral analysis of a six-axis shaker system

    … In parallel with the experiments, Finite Element (FE) models of the shaker were generated, and their dynamic performance was simulated. Time data from experimental test series were compared with the responses from FE analysis obtained for identical test conditions. The comparison of …

    unlv Repository record for Design and spectral analysis of a six-axis shaker system (opens in a new tab) Download PDF for Design and spectral analysis of a six-axis shaker system (opens in a new tab)

  14. Advancements in primary fixation modeling of cementless total knee replacement: From experiment to computational model

    This thesis focused on improving the accuracy of finite element (FE) models for uncemented total knee arthroplasty by integrating bone viscoelasticity and bone abrasion. By incorporating the time-dependent behavior of bone and the wear that occurs during implantation, simulations can more …

    radboud Repository record for Advancements in primary fixation modeling of cementless total knee replacement: From experiment to computational model (opens in a new tab) Download PDF for Advancements in primary fixation modeling of cementless total knee replacement: From experiment to computational model (opens in a new tab)

  15. Finite-Element Modeling of Thin Wires Including Skin- and Proximity Effects

    … treatment of thin conducting wires in finite element (FE) models for the magnetic vector potential magneto- dynamics formulation in frequency domain. The idea of the proposed technique, called Semi-Analytical (SA) method, is three-fold. Real conductors are represented in the FE model by …

    liege Repository record for Finite-Element Modeling of Thin Wires Including Skin- and Proximity Effects (opens in a new tab) Download PDF for Finite-Element Modeling of Thin Wires Including Skin- and Proximity Effects (opens in a new tab)

  16. Biomechanical evaluation of bone marrow lesions in the knee

    … been limited investigation of the mechanical effects of BMLs on joint function. Subchondroplasty has been proposed as a minimally invasive surgical treatment for BMLs where the lesion site is augmented with bone substitute material in attempt to restore biomechanical function. However, it is not …

    whiterose Download PDF for Biomechanical evaluation of bone marrow lesions in the knee (opens in a new tab)

  17. MODELLING DAMAGE IN COMPOSITES SUBJECTED TO IMPACT AND COMPRESSION AFTER IMPACT

    … these objectives. In this work, high-fidelity finite element (FE) models are developed for integrated analysis of impact damage, subsequent growth during compression and prediction of residual strength. Firstly, a Continuum Damage Mechanics (CDM) based model is employed to obtain damage through …

    nus Repository record for MODELLING DAMAGE IN COMPOSITES SUBJECTED TO IMPACT AND COMPRESSION AFTER IMPACT (opens in a new tab) Download file for MODELLING DAMAGE IN COMPOSITES SUBJECTED TO IMPACT AND COMPRESSION AFTER IMPACT (opens in a new tab)

  18. Seismic performance evaluation of a special concrete core wall volumetric steel modular high-rise system

    … firms in Vancouver was studied. The detailed finite element (FE) models in ABAQUS are used to analyze the nonlinear behavior of modular connections used in the prototype building. The results were simplified to develop connection models suitable for the nonlinear simulation of the prototype …

    ubc Repository record for Seismic performance evaluation of a special concrete core wall volumetric steel modular high-rise system (opens in a new tab) Download PDF for Seismic performance evaluation of a special concrete core wall volumetric steel modular high-rise system (opens in a new tab)

  19. Metatarsal Loading in Advanced Footwear Technology

    … of this thesis was to determine the acute effects of advanced footwear technology (AFT) shoes compared to conventional footwear on metatarsal axial forces and midshaft bending moments during overground running, and to explore how any observed force differences may influence peak metatarsal …

    calgary Repository record for Metatarsal Loading in Advanced Footwear Technology (opens in a new tab)

  20. INVESTIGATION OF MULTI-RESONANT MEMS DIRECTIONAL ACOUSTIC SENSORS

    … through development of analytical and finite element (FE) models; creating new sensors designs for construction; characterization of these sensors through laser vibrometry; electrical sensitivity measurements; detailed noise analysis; and AVS DOA analysis. Prototypes were tested in the …

    nps Repository record for INVESTIGATION OF MULTI-RESONANT MEMS DIRECTIONAL ACOUSTIC SENSORS (opens in a new tab)

Page 1 of 13