Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 110 for “"Finite Element Study"”.
-
Finite element study of acoustic waves
… loss-free, compressible fluid is studies by the finite element method. A diaphragm mounted in a semi-infinite rigid baffle generates acoustic waves in a semi-infinite fluid region. Steady-state pressure distribution is found for a hemispherical region with boundary reflection suppressed through …
-
Finite element study of ultrasonic imaging
… Thus, a powerful test bed is essential to study the sensitivity of an inverse algorithm. Numerical models are the most suitable technique for this purpose. In addition, an accurate forward model is also useful to implement iterative inverse schemes;This dissertation describes the …
-
Finite element study of acousto-structural interaction
Finite element models are developed for the analysis of the response of a cylindrical shell with an enclosed acoustic cavity. Depending on the complexity of the cylindrical shell, the work falls into three areas.<br/><br/>Part I involves the study of the response of an unstiffened cylinder. Three …
-
Finite element study of tunnel-soil-pile interaction
This study was initiated to assess the effects of tunneling induced ground movements on adjacent pile foundations. A novel kinematic FE model is first developed to obtain the realistic displacement field around a deforming tunnel. This model was subsequently applied to the analysis of …
-
Finite element study on static pile load testing
… for the static pile load test are analyzed to study the effect of reaction system on the test results. The numerical results indicate that the influence of the reaction system on the settlement of the test pile is usually under-estimated in practice. Besides, O-cell test is analyzed in …
-
Fault evolution and earthquakes : a finite element study
The New Madrid Seismic Zone (NMSZ) in central United States is a good example of intraplate seismicity, which cannot be readily explained by the plate tectonics theory and remains poorly understood. I have developed a 3D FE model to simulate stress evolution in the NMSZ and surrounding regions. I …
-
Bit penetration into rock - A finite element study
"A finite element approach has been developed to simulate bit penetration from bit-rock interaction to chip formation. A mathematical rock failure model, based on a review of the existing literature on rock tests, has been proposed to represent post-failure rock behavior and applied in the …
-
Finite element study of mast arm socket welded connections
… welded connections more critical. Extensive finite element analysis using Abaqus was carried out in this study to determine the effect of different geometric variables like end plate thickness, mast arm diameter, mast arm thickness and weld geometry on stress at the weld toe by estimating the …
-
A nonlinear finite element study of reinforced concrete beams
Summary available: p.iv.
-
Finite element study of ultra high pressure vessel design
… of the various design variables are examined.A Finite Element computer program for axisymmetrical solids, which can handle non-axisymmetrical loads has been developed to further examine the cylinder and steel ring interface, where asymmetrical loads might be applied because of the non perfect …
-
Finite element study of vibration isolation using an underground trench
… The tool used to perform this evaluation is the Finite Element Method (FEM). A two-dimensional (2D) FEM computer program was developed and verified by comparing its results to those of well known theoretical and experimental vibration results: for a one-dimensional (ID) beam; for a 2D plate in …
-
Osteocyte mechanotransduction: changes with age - a parametric finite element study
… the osteocyte network. The purpose of this study was to analyze the effect of age on the microarchitecture of murine bone and use the data to conduct a finite element analysis of strains imposed on the lacuna. Ten murine femur bone samples were studied; 5 old (2-years-old), and 5 young …
-
Rock fragmentation by subsurface thermal inclusions - a finite element study
… investigation is concerned with a feasibility study of thermal rock fragmentation using heat to create in-depth thermal inclusions. The three-dimensional problem of in situ rock fragmentation involves parallel rows of equidistant holes drilled to a constant depth. Thermal inclusions are created …
-
Biomechanical Implications of Lumbar Spinal Ligament TransectionA Finite Element Study
… on the biomechanics of the lumbar spine. A finite element model of a lumbar spine was developed and validated against experimental data. The model was tested in the primary modes of spinal motion in the intact condition, followed by comparative analysis of isolated removal of each spinal …
-
Finite element study of particle contact mechanics and stockpiling process
… view point, e.g. using the so-called discrete element method (DEM), an important aspect is to accurately determine the particle-particle contact forces as they control the motions of the individual particles and accordingly, the bulk behaviour of the granular system. Although many models have …
-
Finite Element Study of Plane Wave Acoustic Phenomena in Ducts
This thesis studied the finite element modeling of plane wave acoustic phenomena in ducts. The study looked into finite element factors such as shape functions, mesh refinement, and element distortion. The study concluded that the higher order shape function eight-node quadrilateral element gave …
Page 1 of 6